📄 watch.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.23 07/09/2003
-- Compiled: 05/11/2007 00:39:59
-- Copyright (C) 1988-2003 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "watch"
BEGIN
DEVICE = "EPF10K10LC84-3";
"beginstop" : INPUT_PIN = 42 ;
"cp2" : INPUT_PIN = 1 ;
"cp3" : INPUT_PIN = 43 ;
"reset" : INPUT_PIN = 2 ;
"seg0" : OUTPUT_PIN = 30 ;
"seg1" : OUTPUT_PIN = 28 ;
"seg2" : OUTPUT_PIN = 27 ;
"seg3" : OUTPUT_PIN = 59 ;
"seg4" : OUTPUT_PIN = 60 ;
"seg5" : OUTPUT_PIN = 61 ;
"seg6" : OUTPUT_PIN = 58 ;
"seg7" : OUTPUT_PIN = 62 ;
"sel1" : OUTPUT_PIN = 24 ;
"sel2" : OUTPUT_PIN = 21 ;
"sel3" : OUTPUT_PIN = 23 ;
"sel4" : OUTPUT_PIN = 22 ;
"sel5" : OUTPUT_PIN = 3 ;
"sel6" : OUTPUT_PIN = 25 ;
"beginstop~1" : LOCATION = LC7_B16;
"beginstop~2" : LOCATION = LC8_B16;
"beginstop~3" : LOCATION = LC8_B17;
"|LPM_ADD_SUB:307|addcore:adder|:55" : LOCATION = LC5_B23;
"|LPM_ADD_SUB:307|addcore:adder|:59" : LOCATION = LC7_B23;
"|LPM_ADD_SUB:366|addcore:adder|:55" : LOCATION = LC6_B21;
"|LPM_ADD_SUB:425|addcore:adder|:69" : LOCATION = LC7_B20;
"|LPM_ADD_SUB:484|addcore:adder|:55" : LOCATION = LC7_B15;
"|LPM_ADD_SUB:602|addcore:adder|:55" : LOCATION = LC4_B17;
":19" : LOCATION = LC3_B23; -- num13
":20" : LOCATION = LC6_B23; -- num12
":21" : LOCATION = LC8_B23; -- num11
":22" : LOCATION = LC4_B23; -- num10
":23" : LOCATION = LC1_B21; -- num23
":24" : LOCATION = LC3_B21; -- num22
":25" : LOCATION = LC2_B21; -- num21
":26" : LOCATION = LC1_B18; -- num20
":27" : LOCATION = LC2_B18; -- num33
":28" : LOCATION = LC4_B20; -- num32
":29" : LOCATION = LC1_B20; -- num31
":30" : LOCATION = LC1_B6 ; -- num30
":31" : LOCATION = LC5_B14; -- num43
":32" : LOCATION = LC4_B15; -- num42
":33" : LOCATION = LC3_B15; -- num41
":34" : LOCATION = LC2_B15; -- num40
":35" : LOCATION = LC1_B24; -- num53
":36" : LOCATION = LC4_B16; -- num52
":37" : LOCATION = LC5_B16; -- num51
":38" : LOCATION = LC3_B16; -- num50
":39" : LOCATION = LC3_B17; -- num63
":40" : LOCATION = LC1_B13; -- num62
":41" : LOCATION = LC1_B17; -- num61
":42" : LOCATION = LC2_B17; -- num60
":43" : LOCATION = LC3_B11; -- numlet2
":44" : LOCATION = LC8_B11; -- numlet1
":45" : LOCATION = LC4_B4 ; -- numlet0
":46" : LOCATION = LC8_B24; -- num3~102
":47" : LOCATION = LC2_B13; -- num2~102
":48" : LOCATION = LC1_B19; -- num1~102
":49" : LOCATION = LC1_B22; -- num0
":50" : LOCATION = LC7_B4 ; -- selsig6
":51" : LOCATION = LC7_B11; -- selsig5
":52" : LOCATION = LC2_B4 ; -- selsig4
":53" : LOCATION = LC3_B4 ; -- selsig3
":54" : LOCATION = LC1_B11; -- selsig2
":55" : LOCATION = LC6_B4 ; -- selsig1
":320" : LOCATION = LC2_B23;
"~320~1" : LOCATION = LC6_B14;
"~320~2" : LOCATION = LC5_B20;
"~320~3" : LOCATION = LC6_B20;
"~320~4" : LOCATION = LC7_B14;
"~320~5" : LOCATION = LC2_B14;
":379" : LOCATION = LC4_B21;
":438" : LOCATION = LC8_B20;
":497" : LOCATION = LC1_B15;
":556" : LOCATION = LC1_B16;
":615" : LOCATION = LC7_B17;
":997" : LOCATION = LC2_B20;
":1148" : LOCATION = LC8_B21;
"~1148~1" : LOCATION = LC8_B12;
":1154" : LOCATION = LC7_B21;
":1160" : LOCATION = LC5_B21;
"~1357~1" : LOCATION = LC3_B20;
"~1363~1" : LOCATION = LC4_B14;
"~1369~1" : LOCATION = LC6_B15;
"~1369~2" : LOCATION = LC8_B14;
"~1375~1" : LOCATION = LC8_B15;
"~1381~1" : LOCATION = LC5_B15;
"~1393~1" : LOCATION = LC2_B16;
"~1393~2" : LOCATION = LC3_B14;
"~1405~1" : LOCATION = LC6_B16;
"~1411~1" : LOCATION = LC1_B14;
"~1417~1" : LOCATION = LC6_B13;
"~1417~2" : LOCATION = LC6_B17;
"~1423~1" : LOCATION = LC3_B13;
"~1429~1" : LOCATION = LC5_B17;
":2011" : LOCATION = LC5_B4 ;
":2076" : LOCATION = LC2_B24;
":2082" : LOCATION = LC1_B23;
":2088" : LOCATION = LC2_B19;
":2094" : LOCATION = LC2_B22;
":2139" : LOCATION = LC6_B11;
":2204" : LOCATION = LC3_B24;
":2210" : LOCATION = LC4_B13;
":2216" : LOCATION = LC3_B19;
":2222" : LOCATION = LC3_B22;
":2267" : LOCATION = LC4_B11;
":2332" : LOCATION = LC4_B24;
":2338" : LOCATION = LC5_B13;
":2344" : LOCATION = LC4_B19;
":2350" : LOCATION = LC4_B22;
":2395" : LOCATION = LC2_B11;
":2460" : LOCATION = LC5_B24;
":2466" : LOCATION = LC7_B13;
":2472" : LOCATION = LC5_B19;
":2478" : LOCATION = LC5_B22;
":2523" : LOCATION = LC1_B4 ;
":2588" : LOCATION = LC6_B24;
":2594" : LOCATION = LC8_B13;
":2600" : LOCATION = LC6_B19;
":2606" : LOCATION = LC6_B22;
":2670" : LOCATION = LC5_B11;
":2933" : LOCATION = LC4_C24;
"~2933~1" : LOCATION = LC8_C24;
":3048" : LOCATION = LC5_C24;
":3163" : LOCATION = LC6_C21;
"~3227~1" : LOCATION = LC1_C21;
":3237" : LOCATION = LC8_C21;
":3245" : LOCATION = LC3_C23;
":3376" : LOCATION = LC6_C15;
":3393" : LOCATION = LC1_C24;
":3463" : LOCATION = LC6_C23;
"~3485~1" : LOCATION = LC7_C15;
":3590" : LOCATION = LC5_C23;
":3623" : LOCATION = LC3_C21;
":3685" : LOCATION = LC5_C15;
"~3685~1" : LOCATION = LC4_C15;
"~3685~2" : LOCATION = LC8_C15;
":3691" : LOCATION = LC8_C23;
"~3691~1" : LOCATION = LC2_C15;
":3738" : LOCATION = LC7_C24;
":3929" : LOCATION = LC2_C21;
":4030" : LOCATION = LC1_C23;
"~4030~1" : LOCATION = LC6_C24;
":4036" : LOCATION = LC7_C23;
":4042" : LOCATION = LC2_C24;
":4048" : LOCATION = LC4_C23;
":4054" : LOCATION = LC5_C21;
"~4054~1" : LOCATION = LC2_C23;
"~4054~2" : LOCATION = LC4_C21;
":4060" : LOCATION = LC1_C15;
":4066" : LOCATION = LC3_C15;
":4072" : LOCATION = LC7_C21;
"~4072~1" : LOCATION = LC3_C24;
END;
INTERNAL_INFO "watch"
BEGIN
DEVICE = EPF10K10LC84-3;
OD3P42 : LORAX = "1:FB3|2:FH3R1|3:PA5R1C13->LC6_B14,->LC4_B14|,3:PA5R1C17->LC1_B18,->LC2_B18|,3:PA5R1C20->LC1_B21,->LC3_B21,->LC2_B21|,3:PA5R1C22->LC3_B23,->LC6_B23,->LC8_B23,->LC4_B23|||";
LC8_B17 : LORAX = "1:MSW7R1C16,HHR25R1,PA3R1C12->LC1_B13|";
OD4P1 : LORAX = "1:FB4->LC3_B23,->LC6_B23,->LC8_B23,->LC4_B23,->LC1_B21,->LC3_B21,->LC2_B21,->LC1_B18,->LC2_B18,->LC4_B20,->LC1_B20,->LC1_B6,->LC5_B14,->LC4_B15,->LC3_B15,->LC2_B15,->LC1_B24,->LC4_B16,->LC5_B16,->LC3_B16,->LC3_B17,->LC1_B13,->LC1_B17,->LC2_B17|";
OD5P43 : LORAX = "1:FB5->LC3_B11,->LC8_B11,->LC4_B4,->LC8_B24,->LC2_B13,->LC1_B19,->LC1_B22,->LC7_B4,->LC7_B11,->LC2_B4,->LC3_B4,->LC1_B11,->LC6_B4|";
LC4_B17 : LORAX = "1:MSW3R1C17,HHR10R1,PA12R1C12->LC1_B13,->LC6_B13,->LC3_B13|";
OD1P2 : LORAX = "1:FB1->LC3_B23,->LC6_B23,->LC8_B23,->LC4_B23,->LC1_B21,->LC3_B21,->LC2_B21,->LC1_B18,->LC2_B18,->LC4_B20,->LC1_B20,->LC1_B6,->LC5_B14,->LC4_B15,->LC3_B15,->LC2_B15,->LC1_B24,->LC4_B16,->LC5_B16,->LC3_B16,->LC3_B17,->LC1_B13,->LC1_B17,->LC2_B17|";
LC3_B23 : LORAX = "1:MSW2R1C22,HHR0R1,PA1R1C23->LC2_B24|";
LC8_B23 : LORAX = "1:MSW7R1C22,G80R1,PA5R1C18->LC2_B19|";
LC4_B23 : LORAX = "1:MSW3R1C22,HHR7R1,PA8R1C21->LC2_B22|";
LC1_B21 : LORAX = "1:MSW0R1C20,G47R1,PA9R1C23->LC3_B24|";
LC3_B21 : LORAX = "1:MSW2R1C20,G7R1,PA7R1C12->LC4_B13|";
LC2_B21 : LORAX = "1:MSW1R1C20,HHR2R1,PA3R1C18->LC3_B19|";
LC1_B18 : LORAX = "1:MSW0R1C17,HHR20R1|2:PA16R1C20->LC6_B21,->LC4_B21,->LC5_B21|,2:PA16R1C21->LC3_B22||";
LC2_B18 : LORAX = "1:MSW1R1C17,G11R1|2:PA2R1C19->LC7_B20,->LC8_B20,->LC2_B20|,2:PA2R1C23->LC4_B24||";
LC4_B20 : LORAX = "1:MSW3R1C19,G5R1,PA16R1C12->LC5_B13|";
LC1_B20 : LORAX = "1:MSW0R1C19,G38R1,PA0R1C18->LC4_B19|";
LC1_B6 : LORAX = "1:MSW0R1C5,G43R1|2:PA16R1C19->LC7_B20,->LC1_B20,->LC5_B20,->LC6_B20,->LC8_B20,->LC3_B20|,2:PA15R1C21->LC4_B22||";
LC5_B14 : LORAX = "1:MSW4R1C13,HHR36R1|2:PA20R1C14->LC1_B15|,2:PA20R1C23->LC5_B24||";
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -