buxx_demoset.h

bu1566dsp芯片用来处理ov7660或其他３０万摄像模组的图像预览．图像拍照（jpeg压缩）

/* ************************************************************************ */
/*                                                                          */
/* ROHM BU15xx demo firmware on MD2306                                      */
/*     Client   : ROHM Co., Ltd.丂丂丂丂丂丂                                 */
/*     End User :                                                           */
/*                                                                          */
/*     Processor: ARM-7TDMI(THUMB Mode)                                     */
/*     Dev.Env. : ARM-SDTv2.51                                              */
/*                                                                          */
/*     Demo software setup table Header                                     */
/*                                                                          */
/*     file     : BUxx_demoset.h                                            */
/*     Auther   : J.SATO(NTC)丂                                             */
/*     Date     : 2004/Jul./1		                                    */
/*                                                                          */
/*     Copyright (c) 2002-04 Naritagiken Co., Ltd. All rights reserved.     */
/* ************************************************************************ */
/* History:								    */
/* 2004/Jul./1 Rev 1.00 create		                                    */
/*                                                                          */
/* ************************************************************************ */

/* ************************************************** */
/*		     INCLUDE FILES		      */
/* ************************************************** */

/* ************************************************** */
/*		        DEFINES			      */
/* ************************************************** */


//*** Target board select ***
//#define       __MINIBOARD__
//#define       __81MODE__
//#define       __SINGLELCD__

//-------------------------------------------
//*******************************************
//                       definition丂(other)丂                  *
//*******************************************
//-------------------------------------------
#define BASE_ADDRESS	0x200000

//*******************************************
//           Target BORAD Version          *
//*******************************************

#define TAR_VERSION	0x0204
#define MLCD_MODULE	"newNECLCD/HITACHIdv"
#define SLCD_MODULE	"newNECLCD/HITACHIdv"
//#endif

#define CAM_MODULE	"csm_205 or csv1061"

//-------------------------------------------
//*******************************************
//                       definition丂(other)丂                  *
//*******************************************
//-------------------------------------------

//******** Capture data store area **********
#define	FSAVE_BMEMO	0x70000
#define	WORK_MEMO	0x200000

//*******************************************
//          MotionJPEG store area           *
//*******************************************
#define START_MOJPEG	0x230000        //store start address
#define END_MOJPEG	0x270000        //store end address
                                        //max  :0x270000  MINI,DEMOBOARD
                                        //max  :0x3e0000  ARMBOARD

//*******************************************
//          MPEG4/H263 store area           *
//*******************************************
#define BUFFER_ST_ADD	0x230000        //store start address
#define BUFFER_SIZE	0x100000        //store end address
                                        //max  :0x27ffff  MINI,DEMOBOARD
                                        //max  :0x3ffeff  ARMBOARD


//*******************************************
//          USB command control             *
//*******************************************
#define USB_CNT_ADR	0x200000        //USB control start address:
#define MAXSEGMENTSIZE	(64*1024*3)     //Temporary memory size of Bulk dispose




//*******************************************
//              CHIP is set up                          *
//*******************************************

#define BU1594	0x0000
#define BU1593	0x0001

#define BU1560	0x000a
#define BU1561	0x000b
#define BU1563	0x000c

#define UNKNOWN	0xffff

/**************** bu15xx ACCESS ***************/
#define	ARMBOARD	0x00
#define   DEMOBOARD	0x01

//For bigendian or littleendian setting
#define BIG		0x0000
#define LITTLE		0x0010

//*******************************************
//              KEY is set up                           *
//*******************************************
#define KEY0	0x001
#define KEY1	0x002
#define KEY2	0x004
#define KEY3	0x008
#define KEY4	0x010
#define KEY5	0x020
#define KEY6	0x040
#define KEY7	0x080
#define KEY8	0x100

/* ************************************************** */
/*		        TYPEDEF		    	      */
/* ************************************************** */

/* ************************************************** */
/*		    GLOBAL VARIABLE		      */
/* ************************************************** */
extern int gl_timer_chk;
extern int gl_busmode_flag;
extern volatile unsigned short gl_keystate;
extern volatile unsigned short gl_keyoldst;
extern volatile unsigned short gl_keydisp;
extern volatile int gl_usb_input;
extern volatile int gl_usb_oldin;
//extern volatile char gl_macro_st;
extern unsigned short gl_productID;
extern int gl_dl_version;
extern volatile int gl_bus_access;
extern int gl_busmode_flag;

/* ************************************************** */
/*		    GLOBAL FUNCTIONS		      */
/* ************************************************** */

extern void JUMP_DUMMY(void);