kcpsm3.vhd

硬件平台为Xilinx Spartan3e

    generic map (INIT => X"1F")
  --synthesis translate_on
  port map( I0 => instruction(14),
            I1 => instruction(15),
            I2 => instruction(16),
             O => sel_arith );

  arith_loop: for i in 0 to 7 generate
  --
  -- Attribute to define LUT contents during implementation 
  -- The information is repeated in the generic map for functional simulation
  attribute INIT : string; 
  attribute INIT of arith_lut : label is "96"; 
  --
  begin

    lsb_arith: if i=0 generate
    --
    -- Attribute to define LUT contents during implementation 
    -- The information is repeated in the generic map for functional simulation
    attribute INIT : string; 
    attribute INIT of arith_carry_in_lut : label is "6C";
    --
    begin

      arith_carry_in_lut: LUT3
      --synthesis translate_off
        generic map (INIT => X"6C")
      --synthesis translate_on
      port map( I0 => instruction(13),
                I1 => instruction(14),
                I2 => carry_flag,
                 O => sel_arith_carry_in );

      arith_carry_in_muxcy: MUXCY
      port map( DI => '0',
                CI => '1',
                 S => sel_arith_carry_in,
                 O => arith_carry_in);

      arith_muxcy: MUXCY
      port map( DI => sx(i),
                CI => arith_carry_in,
                 S => half_arith(i),
                 O => arith_internal_carry(i));

      arith_xor: XORCY
      port map( LI => half_arith(i),
                CI => arith_carry_in,
                 O => arith_value(i));
	   
    end generate lsb_arith;

    mid_arith: if i>0 and i<7 generate
    begin

      arith_muxcy: MUXCY
      port map( DI => sx(i),
                CI => arith_internal_carry(i-1),
                 S => half_arith(i),
                 O => arith_internal_carry(i));

      arith_xor: XORCY
      port map( LI => half_arith(i),
                CI => arith_internal_carry(i-1),
                 O => arith_value(i));
	   
    end generate mid_arith;

    msb_arith: if i=7 generate
    --
    -- Attribute to define LUT contents during implementation 
    -- The information is repeated in the generic map for functional simulation
    attribute INIT : string; 
    attribute INIT of arith_carry_out_lut : label is "2";
    --
    begin

      arith_muxcy: MUXCY
      port map( DI => sx(i),
                CI => arith_internal_carry(i-1),
                 S => half_arith(i),
                 O => arith_internal_carry(i));

      arith_xor: XORCY
      port map( LI => half_arith(i),
                CI => arith_internal_carry(i-1),
                 O => arith_value(i));

      arith_carry_out_lut: LUT1
      --synthesis translate_off
        generic map (INIT => X"2")
      --synthesis translate_on
      port map( I0 => instruction(14),
                 O => invert_arith_carry );

      arith_carry_out_xor: XORCY
      port map( LI => invert_arith_carry,
                CI => arith_internal_carry(i),
                 O => arith_carry_out);

      arith_carry_flop: FDR
      port map ( D => arith_carry_out,
                 Q => arith_carry,
                 R => sel_arith,
                 C => clk);

    end generate msb_arith;

    arith_lut: LUT3
    --synthesis translate_off
    generic map (INIT => X"96")
    --synthesis translate_on
    port map( I0 => sx(i),
              I1 => second_operand(i),
              I2 => instruction(14),
               O => half_arith(i));

    arith_flop: FDR
    port map ( D => arith_value(i),
               Q => arith_result(i),
               R => sel_arith,
               C => clk);

  end generate arith_loop;
--
--
------------------------------------------------------------------------------------
--
-- ALU multiplexer
--
------------------------------------------------------------------------------------
--
  input_fetch_type_lut: LUT4
  --synthesis translate_off
    generic map (INIT => X"0002")
  --synthesis translate_on
  port map( I0 => instruction(14),
            I1 => instruction(15),
            I2 => instruction(16),
            I3 => instruction(17),
             O => input_fetch_type );

  sel_group_flop: FD
  port map ( D => input_fetch_type,
             Q => sel_group,
             C => clk);

  alu_mux_loop: for i in 0 to 7 generate
  --
  -- Attribute to define LUT contents during implementation 
  -- The information is repeated in the generic map for functional simulation
  attribute INIT : string; 
  attribute INIT of or_lut  : label is "FE"; 
  attribute INIT of mux_lut : label is "E4"; 
  --
  begin

    or_lut: LUT3
    --synthesis translate_off
    generic map (INIT => X"FE")
    --synthesis translate_on
    port map( I0 => logical_result(i),
              I1 => arith_result(i),
              I2 => shift_result(i),
               O => alu_group(i));

    mux_lut: LUT3
    --synthesis translate_off
    generic map (INIT => X"E4")
    --synthesis translate_on
    port map( I0 => instruction(13),
              I1 => in_port(i),
              I2 => store_data(i),
               O => input_group(i));

    shift_in_muxf5: MUXF5
    port map(  I1 => input_group(i),
               I0 => alu_group(i),
                S => sel_group,
                O => alu_result(i) ); 

  end generate alu_mux_loop;
--
------------------------------------------------------------------------------------
--
-- Read and Write Strobes
--
------------------------------------------------------------------------------------
--
  io_decode_lut: LUT4
  --synthesis translate_off
    generic map (INIT => X"0010")
  --synthesis translate_on
  port map( I0 => active_interrupt,
            I1 => instruction(13),
            I2 => instruction(14),
            I3 => instruction(16),
             O => io_initial_decode );

  write_active_lut: LUT4
  --synthesis translate_off
    generic map (INIT => X"4000")
  --synthesis translate_on
  port map( I0 => t_state,
            I1 => instruction(15),
            I2 => instruction(17),
            I3 => io_initial_decode,
             O => write_active );

  write_strobe_flop: FDR
  port map ( D => write_active,
             Q => write_strobe,
             R => internal_reset,
             C => clk);

  read_active_lut: LUT4
  --synthesis translate_off
    generic map (INIT => X"0100")
  --synthesis translate_on
  port map( I0 => t_state,
            I1 => instruction(15),
            I2 => instruction(17),
            I3 => io_initial_decode,
             O => read_active );

  read_strobe_flop: FDR
  port map ( D => read_active,
             Q => read_strobe,
             R => internal_reset,
             C => clk);
--
------------------------------------------------------------------------------------
--
-- Program CALL/RETURN stack
--
-- Provided the counter and memory for a 32 deep stack supporting nested 
-- subroutine calls to a depth of 31 levels.
--
------------------------------------------------------------------------------------
--
  -- Stack memory is 32 locations of 10-bit single port.
  
  stack_ram_inv: INV   -- Inverter should be implemented in the WE to RAM
  port map(  I => t_state,
             O => stack_write_enable); 

  stack_ram_loop: for i in 0 to 9 generate
  --
  -- Attribute to define RAM contents during implementation 
  -- The information is repeated in the generic map for functional simulation
  --
  attribute INIT : string; 
  attribute INIT of stack_bit : label is "00000000"; 
  --
  begin

    stack_bit: RAM32X1S
    --synthesis translate_off
    generic map(INIT => X"00000000")
    --synthesis translate_on
    port map (       D => pc(i),
                    WE => stack_write_enable,
                  WCLK => clk,
                    A0 => stack_address(0),
                    A1 => stack_address(1),
                    A2 => stack_address(2),
                    A3 => stack_address(3),
                    A4 => stack_address(4),
                     O => stack_ram_data(i));

    stack_flop: FD
    port map ( D => stack_ram_data(i),
               Q => stack_pop_data(i),
               C => clk);

  end generate stack_ram_loop;

  -- Stack address pointer is a 5-bit counter

  stack_count_inv: INV   -- Inverter should be implemented in the CE to the flip-flops
  port map(  I => active_interrupt,
             O => not_active_interrupt); 

  stack_count_loop: for i in 0 to 4 generate
  begin
  
    register_bit: FDRE
    port map ( D => next_stack_address(i),
               Q => stack_address(i),
               R => internal_reset,
              CE => not_active_interrupt,
               C => clk);

    lsb_stack_count: if i=0 generate
    --
    -- Attribute to define LUT contents during implementation 
    -- The information is repeated in the generic map for functional simulation
    --
    attribute INIT : string; 
    attribute INIT of count_lut : label is "6555"; 
    --
    begin
    
      count_lut: LUT4
      --synthesis translate_off
      generic map (INIT => X"6555")
      --synthesis translate_on
      port map( I0 => stack_address(i),
                I1 => t_state,
                I2 => valid_to_move,
                I3 => push_or_pop_type,
                 O => half_stack_address(i) );
    
      count_muxcy: MUXCY
      port map( DI => stack_address(i),
                CI => '0',
                 S => half_stack_address(i),
                 O => stack_address_carry(i));
    
      count_xor: XORCY
      port map( LI => half_stack_address(i),
                CI => '0',
                 O => next_stack_address(i));
    				   					   
    end generate lsb_stack_count;

    mid_stack_count: if i>0 and i<4 generate
    --
    -- Attribute to define LUT contents during implementation 
    -- The information is repeated in the generic map for functional simulation
    --
    attribute INIT : string; 
    attribute INIT of count_lut : label is "A999"; 
    --
    begin
    
      count_lut: LUT4
      --synthesis translate_off
      generic map (INIT => X"A999")
      --synthesis translate_on
      port map( I0 => stack_address(i),
                I1 => t_state,
                I2 => valid_to_move,
                I3 => call_type,
                 O => half_stack_address(i) );
    
      count_muxcy: MUXCY
      port map( DI => stack_address(i),
                CI => stack_address_carry(i-1),
                 S => half_stack_address(i),
                 O => stack_address_carry(i));
    
      count_xor: XORCY
      port map( LI => half_stack_address(i),
                CI => stack_address_carry(i-1),
                 O => next_stack_address(i));
    				   					   
    end generate mid_stack_count;


    msb_stack_count: if i=4 generate
    --
    -- Attribute to define LUT contents during implementation 
    -- The information is repeated in the generic map for functional simulation
    --
    attribute INIT : string; 
    attribute INIT of count_lut : label is "A999"; 
    --
    begin