⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 wrgif.c

📁 Jpeg source code,jpeg编码解码示范
💻 C
📖 第 1 页 / 共 2 页
字号:
/* * wrgif.c * * Copyright (C) 1991-1996, Thomas G. Lane. * This file is part of the Independent JPEG Group's software. * For conditions of distribution and use, see the accompanying README file. * ************************************************************************** * WARNING: You will need an LZW patent license from Unisys in order to   * * use this file legally in any commercial or shareware application.      * ************************************************************************** * * This file contains routines to write output images in GIF format. * * These routines may need modification for non-Unix environments or * specialized applications.  As they stand, they assume output to * an ordinary stdio stream. *//* * This code is loosely based on ppmtogif from the PBMPLUS distribution * of Feb. 1991.  That file contains the following copyright notice: *    Based on GIFENCODE by David Rowley <mgardi@watdscu.waterloo.edu>. *    Lempel-Ziv compression based on "compress" by Spencer W. Thomas et al. *    Copyright (C) 1989 by Jef Poskanzer. *    Permission to use, copy, modify, and distribute this software and its *    documentation for any purpose and without fee is hereby granted, provided *    that the above copyright notice appear in all copies and that both that *    copyright notice and this permission notice appear in supporting *    documentation.  This software is provided "as is" without express or *    implied warranty. * * We are also required to state that *    "The Graphics Interchange Format(c) is the Copyright property of *    CompuServe Incorporated. GIF(sm) is a Service Mark property of *    CompuServe Incorporated." */#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */#ifdef GIF_SUPPORTED#define	MAX_LZW_BITS	12	/* maximum LZW code size (4096 symbols) */typedef INT16 code_int;		/* must hold -1 .. 2**MAX_LZW_BITS */#define LZW_TABLE_SIZE	((code_int) 1 << MAX_LZW_BITS)#define HSIZE		5003	/* hash table size for 80% occupancy */typedef int hash_int;		/* must hold -2*HSIZE..2*HSIZE */#define MAXCODE(n_bits)	(((code_int) 1 << (n_bits)) - 1)/* * The LZW hash table consists of two parallel arrays: *   hash_code[i]	code of symbol in slot i, or 0 if empty slot *   hash_value[i]	symbol's value; undefined if empty slot * where slot values (i) range from 0 to HSIZE-1.  The symbol value is * its prefix symbol's code concatenated with its suffix character. * * Algorithm:  use open addressing double hashing (no chaining) on the * prefix code / suffix character combination.  We do a variant of Knuth's * algorithm D (vol. 3, sec. 6.4) along with G. Knott's relatively-prime * secondary probe. * * The hash_value[] table is allocated from FAR heap space since it would * use up rather a lot of the near data space in a PC. */typedef INT32 hash_entry;	/* must hold (code_int<<8) | byte */#define HASH_ENTRY(prefix,suffix)  ((((hash_entry) (prefix)) << 8) | (suffix))/* Private version of data destination object */typedef struct {  struct djpeg_dest_struct pub;	/* public fields */  j_decompress_ptr cinfo;	/* back link saves passing separate parm */  /* State for packing variable-width codes into a bitstream */  int n_bits;			/* current number of bits/code */  code_int maxcode;		/* maximum code, given n_bits */  int init_bits;		/* initial n_bits ... restored after clear */  INT32 cur_accum;		/* holds bits not yet output */  int cur_bits;			/* # of bits in cur_accum */  /* LZW string construction */  code_int waiting_code;	/* symbol not yet output; may be extendable */  boolean first_byte;		/* if TRUE, waiting_code is not valid */  /* State for LZW code assignment */  code_int ClearCode;		/* clear code (doesn't change) */  code_int EOFCode;		/* EOF code (ditto) */  code_int free_code;		/* first not-yet-used symbol code */  /* LZW hash table */  code_int *hash_code;		/* => hash table of symbol codes */  hash_entry FAR *hash_value;	/* => hash table of symbol values */  /* GIF data packet construction buffer */  int bytesinpkt;		/* # of bytes in current packet */  char packetbuf[256];		/* workspace for accumulating packet */} gif_dest_struct;typedef gif_dest_struct * gif_dest_ptr;/* * Routines to package compressed data bytes into GIF data blocks. * A data block consists of a count byte (1..255) and that many data bytes. */LOCAL(void)flush_packet (gif_dest_ptr dinfo)/* flush any accumulated data */{  if (dinfo->bytesinpkt > 0) {	/* never write zero-length packet */    dinfo->packetbuf[0] = (char) dinfo->bytesinpkt++;    if (JFWRITE(dinfo->pub.output_file, dinfo->packetbuf, dinfo->bytesinpkt)	!= (size_t) dinfo->bytesinpkt)      ERREXIT(dinfo->cinfo, JERR_FILE_WRITE);    dinfo->bytesinpkt = 0;  }}/* Add a character to current packet; flush to disk if necessary */#define CHAR_OUT(dinfo,c)  \	{ (dinfo)->packetbuf[++(dinfo)->bytesinpkt] = (char) (c);  \	    if ((dinfo)->bytesinpkt >= 255)  \	      flush_packet(dinfo);  \	}/* Routine to convert variable-width codes into a byte stream */LOCAL(void)output (gif_dest_ptr dinfo, code_int code)/* Emit a code of n_bits bits *//* Uses cur_accum and cur_bits to reblock into 8-bit bytes */{  dinfo->cur_accum |= ((INT32) code) << dinfo->cur_bits;  dinfo->cur_bits += dinfo->n_bits;  while (dinfo->cur_bits >= 8) {    CHAR_OUT(dinfo, dinfo->cur_accum & 0xFF);    dinfo->cur_accum >>= 8;    dinfo->cur_bits -= 8;  }  /*   * If the next entry is going to be too big for the code size,   * then increase it, if possible.  We do this here to ensure   * that it's done in sync with the decoder's codesize increases.   */  if (dinfo->free_code > dinfo->maxcode) {    dinfo->n_bits++;    if (dinfo->n_bits == MAX_LZW_BITS)      dinfo->maxcode = LZW_TABLE_SIZE; /* free_code will never exceed this */    else      dinfo->maxcode = MAXCODE(dinfo->n_bits);  }}/* The LZW algorithm proper */LOCAL(void)clear_hash (gif_dest_ptr dinfo)/* Fill the hash table with empty entries */{  /* It's sufficient to zero hash_code[] */  MEMZERO(dinfo->hash_code, HSIZE * SIZEOF(code_int));}LOCAL(void)clear_block (gif_dest_ptr dinfo)/* Reset compressor and issue a Clear code */{  clear_hash(dinfo);			/* delete all the symbols */  dinfo->free_code = dinfo->ClearCode + 2;  output(dinfo, dinfo->ClearCode);	/* inform decoder */  dinfo->n_bits = dinfo->init_bits;	/* reset code size */  dinfo->maxcode = MAXCODE(dinfo->n_bits);}LOCAL(void)compress_init (gif_dest_ptr dinfo, int i_bits)/* Initialize LZW compressor */{  /* init all the state variables */  dinfo->n_bits = dinfo->init_bits = i_bits;  dinfo->maxcode = MAXCODE(dinfo->n_bits);  dinfo->ClearCode = ((code_int) 1 << (i_bits - 1));  dinfo->EOFCode = dinfo->ClearCode + 1;  dinfo->free_code = dinfo->ClearCode + 2;  dinfo->first_byte = TRUE;	/* no waiting symbol yet */  /* init output buffering vars */  dinfo->bytesinpkt = 0;  dinfo->cur_accum = 0;  dinfo->cur_bits = 0;  /* clear hash table */  clear_hash(dinfo);  /* GIF specifies an initial Clear code */  output(dinfo, dinfo->ClearCode);}LOCAL(void)compress_byte (gif_dest_ptr dinfo, int c)/* Accept and compress one 8-bit byte */{  register hash_int i;  register hash_int disp;  register hash_entry probe_value;  if (dinfo->first_byte) {	/* need to initialize waiting_code */    dinfo->waiting_code = c;    dinfo->first_byte = FALSE;    return;  }  /* Probe hash table to see if a symbol exists for   * waiting_code followed by c.   * If so, replace waiting_code by that symbol and return.   */  i = ((hash_int) c << (MAX_LZW_BITS-8)) + dinfo->waiting_code;  /* i is less than twice 2**MAX_LZW_BITS, therefore less than twice HSIZE */  if (i >= HSIZE)    i -= HSIZE;  probe_value = HASH_ENTRY(dinfo->waiting_code, c);    if (dinfo->hash_code[i] != 0) { /* is first probed slot empty? */    if (dinfo->hash_value[i] == probe_value) {      dinfo->waiting_code = dinfo->hash_code[i];      return;    }    if (i == 0)			/* secondary hash (after G. Knott) */      disp = 1;    else      disp = HSIZE - i;    for (;;) {      i -= disp;

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -