xskz.rpt

这是本人在Max plus2环境下用VHDL语言编的交通灯控制程序。做EDA课程设计的朋友可以下来参考参考。

        | | | | | | | | | | | | | +----- LC98 ~758~1~2
        | | | | | | | | | | | | | | +--- LC99 ~758~1~3
        | | | | | | | | | | | | | | | +- LC106 ~758~1
        | | | | | | | | | | | | | | | | 
        | | | | | | | | | | | | | | | |   Other LABs fed by signals
        | | | | | | | | | | | | | | | |   that feed LAB 'G'
LC      | | | | | | | | | | | | | | | | | A B C D E F G H |     Logic cells that feed LAB 'G':
LC111-> - - - * * - * - - - - - - - - - | - - - - - - * - | <-- ~563~1
LC112-> - - * - - - - * - * - - - - - - | - - - - - - * - | <-- ~638~1
LC100-> - * - - - - - - - - * - * - - - | - - - - - - * - | <-- ~683~1
LC106-> * - - - - - - - - - - - - * - * | - - - - - - * - | <-- ~758~1

Pin
22   -> * - - - - - - - - - - - - * * * | - - - - - - * - | <-- AIN15B1
39   -> - * - - - - - - - - * * * - - - | - - - - - - * - | <-- AIN15B6
54   -> - - * - - - - * * * - - - - - - | - - - - - - * - | <-- AIN15M1
49   -> - - - * * * * - - - - - - - - - | - - - - - - * - | <-- AIN15M6
80   -> * - - - - - - - - - - - - * * - | - - - - - - * - | <-- AIN25B1
84   -> - - - - - - - - - - - - - - - - | - - - - - * - - | <-- AIN25B2
51   -> - * - - - - - - - - * * - - - - | - - - - - - * - | <-- AIN25B6
34   -> - - * - - - - * * - - - - - - - | - - - - - - * - | <-- AIN25M1
21   -> - - - * * * - - - - - - - - - - | - - - - - - * - | <-- AIN25M6
17   -> * - * - - - - * * * - - - * * * | - - - - - - * - | <-- AIN51
27   -> - * - * * * * - - - * * * - - - | - - - - - - * - | <-- AIN56
12   -> * * * * * * * * * * * * * * * * | - - - - * * * * | <-- EN5B
11   -> * * * * * * * * * * * * * * * * | - - - - * * * * | <-- EN5M
10   -> * * * * * * * * * * * * * * * * | - - - - * * * * | <-- EN15
9    -> * * * * * * * * * * * * * * * * | - - - - * * * * | <-- EN25
LC55 -> - - - - - - * - - - - - - - - - | - - - - - - * - | <-- ~563~1~4
LC63 -> - - - - - - - - - * - - - - - - | - - - - - - * - | <-- ~638~1~4
LC49 -> - - - - - - - - - - - - * - - - | - - - - - - * - | <-- ~683~1~4
LC40 -> - - - - - - - - - - - - - - - * | - - - - - - * - | <-- ~758~1~4


* = The logic cell or pin is an input to the logic cell (or LAB) through the PIA.
- = The logic cell or pin is not an input to the logic cell (or LAB).


Device-Specific Information:                            d:\eda\hxrjtd\xskz.rpt
xskz

** LOGIC CELL INTERCONNECTIONS **

Logic Array Block 'H':

                                         Logic cells placed in LAB 'H'
        +------------------------------- LC115 DOUTB0
        | +----------------------------- LC118 DOUTB7
        | | +--------------------------- LC117 DOUTM0
        | | | +------------------------- LC120 DOUTM7
        | | | | +----------------------- LC125 ~548~1~2
        | | | | | +--------------------- LC119 ~548~1~3
        | | | | | | +------------------- LC116 ~548~1
        | | | | | | | +----------------- LC114 ~653~1~2
        | | | | | | | | +--------------- LC113 ~653~1~3
        | | | | | | | | | +------------- LC124 ~653~1
        | | | | | | | | | | +----------- LC123 ~668~1~2
        | | | | | | | | | | | +--------- LC122 ~668~1~3
        | | | | | | | | | | | | +------- LC121 ~668~1
        | | | | | | | | | | | | | +----- LC126 ~773~1~2
        | | | | | | | | | | | | | | +--- LC127 ~773~1~3
        | | | | | | | | | | | | | | | +- LC128 ~773~1
        | | | | | | | | | | | | | | | | 
        | | | | | | | | | | | | | | | |   Other LABs fed by signals
        | | | | | | | | | | | | | | | |   that feed LAB 'H'
LC      | | | | | | | | | | | | | | | | | A B C D E F G H |     Logic cells that feed LAB 'H':
LC116-> - - - * * - * - - - - - - - - - | - - - - - - - * | <-- ~548~1
LC124-> - - * - - - - * - * - - - - - - | - - - - - - - * | <-- ~653~1
LC121-> - * - - - - - - - - * - * - - - | - - - - - - - * | <-- ~668~1
LC128-> * - - - - - - - - - - - - * - * | - - - - - - - * | <-- ~773~1

Pin
37   -> * - - - - - - - - - - - - * * * | - - - - - - - * | <-- AIN15B0
24   -> - * - - - - - - - - * * * - - - | - - - - - - - * | <-- AIN15B7
25   -> - - * - - - - * * * - - - - - - | - - - - - - - * | <-- AIN15M0
40   -> - - - * * * * - - - - - - - - - | - - - - - - - * | <-- AIN15M7
77   -> * - - - - - - - - - - - - * * - | - - - - - - - * | <-- AIN25B0
84   -> - - - - - - - - - - - - - - - - | - - - - - * - - | <-- AIN25B2
65   -> - * - - - - - - - - * * - - - - | - - - - - - - * | <-- AIN25B7
33   -> - - * - - - - * * - - - - - - - | - - - - - - - * | <-- AIN25M0
20   -> - - - * * * - - - - - - - - - - | - - - - - - - * | <-- AIN25M7
18   -> * - * - - - - * * * - - - * * * | - - - - - - - * | <-- AIN50
41   -> - * - * * * * - - - * * * - - - | - - - - - - - * | <-- AIN57
12   -> * * * * * * * * * * * * * * * * | - - - - * * * * | <-- EN5B
11   -> * * * * * * * * * * * * * * * * | - - - - * * * * | <-- EN5M
10   -> * * * * * * * * * * * * * * * * | - - - - * * * * | <-- EN15
9    -> * * * * * * * * * * * * * * * * | - - - - * * * * | <-- EN25
LC50 -> - - - - - - * - - - - - - - - - | - - - - - - - * | <-- ~548~1~4
LC59 -> - - - - - - - - - * - - - - - - | - - - - - - - * | <-- ~653~1~4
LC58 -> - - - - - - - - - - - - * - - - | - - - - - - - * | <-- ~668~1~4
LC41 -> - - - - - - - - - - - - - - - * | - - - - - - - * | <-- ~773~1~4


* = The logic cell or pin is an input to the logic cell (or LAB) through the PIA.
- = The logic cell or pin is not an input to the logic cell (or LAB).


Device-Specific Information:                            d:\eda\hxrjtd\xskz.rpt
xskz

** EQUATIONS **

AIN15B0  : INPUT;
AIN15B1  : INPUT;
AIN15B2  : INPUT;
AIN15B3  : INPUT;
AIN15B4  : INPUT;
AIN15B5  : INPUT;
AIN15B6  : INPUT;
AIN15B7  : INPUT;
AIN15M0  : INPUT;
AIN15M1  : INPUT;
AIN15M2  : INPUT;
AIN15M3  : INPUT;
AIN15M4  : INPUT;
AIN15M5  : INPUT;
AIN15M6  : INPUT;
AIN15M7  : INPUT;
AIN25B0  : INPUT;
AIN25B1  : INPUT;
AIN25B2  : INPUT;
AIN25B3  : INPUT;
AIN25B4  : INPUT;
AIN25B5  : INPUT;
AIN25B6  : INPUT;
AIN25B7  : INPUT;
AIN25M0  : INPUT;
AIN25M1  : INPUT;
AIN25M2  : INPUT;
AIN25M3  : INPUT;
AIN25M4  : INPUT;
AIN25M5  : INPUT;
AIN25M6  : INPUT;
AIN25M7  : INPUT;
AIN50    : INPUT;
AIN51    : INPUT;
AIN52    : INPUT;
AIN53    : INPUT;
AIN54    : INPUT;
AIN55    : INPUT;
AIN56    : INPUT;
AIN57    : INPUT;
EN5B     : INPUT;
EN5M     : INPUT;
EN15     : INPUT;
EN25     : INPUT;

-- Node name is 'DOUTB0' 
-- Equation name is 'DOUTB0', location is LC115, type is output.
 DOUTB0  = LCELL( _EQ001 $  GND);
  _EQ001 = !EN5B & !EN5M & !EN15 & !EN25 &  _LC128
         #  AIN50 &  EN5B & !EN15 & !EN25
         #  AIN15B0 & !EN5M &  EN15 & !EN25
         #  AIN50 &  EN5M & !EN25
         #  AIN25B0 &  EN25;

-- Node name is 'DOUTB1' 
-- Equation name is 'DOUTB1', location is LC097, type is output.
 DOUTB1  = LCELL( _EQ002 $  GND);
  _EQ002 = !EN5B & !EN5M & !EN15 & !EN25 &  _LC106
         #  AIN51 &  EN5B & !EN15 & !EN25
         #  AIN15B1 & !EN5M &  EN15 & !EN25
         #  AIN51 &  EN5M & !EN25
         #  AIN25B1 &  EN25;

-- Node name is 'DOUTB2' 
-- Equation name is 'DOUTB2', location is LC094, type is output.
 DOUTB2  = LCELL( _EQ003 $  GND);
  _EQ003 = !EN5B & !EN5M & !EN15 & !EN25 &  _LC086
         #  AIN52 &  EN5B & !EN15 & !EN25
         #  AIN15B2 & !EN5M &  EN15 & !EN25
         #  AIN52 &  EN5M & !EN25
         #  AIN25B2 &  EN25;

-- Node name is 'DOUTB3' 
-- Equation name is 'DOUTB3', location is LC075, type is output.
 DOUTB3  = LCELL( _EQ004 $  GND);
  _EQ004 = !EN5B & !EN5M & !EN15 & !EN25 &  _LC077
         #  AIN53 &  EN5B & !EN15 & !EN25
         #  AIN15B3 & !EN5M &  EN15 & !EN25
         #  AIN53 &  EN5M & !EN25
         #  AIN25B3 &  EN25;

-- Node name is 'DOUTB4' 
-- Equation name is 'DOUTB4', location is LC072, type is output.
 DOUTB4  = LCELL( _EQ005 $  GND);
  _EQ005 = !EN5B & !EN5M & !EN15 & !EN25 &  _LC069
         #  AIN54 &  EN5B & !EN15 & !EN25
         #  AIN15B4 & !EN5M &  EN15 & !EN25
         #  AIN54 &  EN5M & !EN25
         #  AIN25B4 &  EN25;

-- Node name is 'DOUTB5' 
-- Equation name is 'DOUTB5', location is LC088, type is output.
 DOUTB5  = LCELL( _EQ006 $  GND);
  _EQ006 = !EN5B & !EN5M & !EN15 & !EN25 &  _LC087
         #  AIN55 &  EN5B & !EN15 & !EN25
         #  AIN15B5 & !EN5M &  EN15 & !EN25
         #  AIN55 &  EN5M & !EN25
         #  AIN25B5 &  EN25;

-- Node name is 'DOUTB6' 
-- Equation name is 'DOUTB6', location is LC109, type is output.
 DOUTB6  = LCELL( _EQ007 $  GND);
  _EQ007 = !EN5B & !EN5M & !EN15 & !EN25 &  _LC100
         #  AIN56 &  EN5B & !EN15 & !EN25
         #  AIN15B6 & !EN5M &  EN15 & !EN25
         #  AIN56 &  EN5M & !EN25
         #  AIN25B6 &  EN25;

-- Node name is 'DOUTB7' 
-- Equation name is 'DOUTB7', location is LC118, type is output.
 DOUTB7  = LCELL( _EQ008 $  GND);
  _EQ008 = !EN5B & !EN5M & !EN15 & !EN25 &  _LC121
         #  AIN57 &  EN5B & !EN15 & !EN25
         #  AIN15B7 & !EN5M &  EN15 & !EN25
         #  AIN57 &  EN5M & !EN25
         #  AIN25B7 &  EN25;

-- Node name is 'DOUTM0' 
-- Equation name is 'DOUTM0', location is LC117, type is output.
 DOUTM0  = LCELL( _EQ009 $  GND);
  _EQ009 = !EN5B & !EN5M & !EN15 & !EN25 &  _LC124
         #  AIN50 &  EN5B & !EN15 & !EN25
         #  AIN15M0 & !EN5M &  EN15 & !EN25
         #  AIN50 &  EN5M & !EN25
         #  AIN25M0 &  EN25;

-- Node name is 'DOUTM1' 
-- Equation name is 'DOUTM1', location is LC107, type is output.
 DOUTM1  = LCELL( _EQ010 $  GND);
  _EQ010 = !EN5B & !EN5M & !EN15 & !EN25 &  _LC112
         #  AIN51 &  EN5B & !EN15 & !EN25
         #  AIN15M1 & !EN5M &  EN15 & !EN25
         #  AIN51 &  EN5M & !EN25
         #  AIN25M1 &  EN25;

-- Node name is 'DOUTM2' 
-- Equation name is 'DOUTM2', location is LC093, type is output.
 DOUTM2  = LCELL( _EQ011 $  GND);
  _EQ011 = !EN5B & !EN5M & !EN15 & !EN25 &  _LC084
         #  AIN52 &  EN5B & !EN15 & !EN25
         #  AIN15M2 & !EN5M &  EN15 & !EN25
         #  AIN52 &  EN5M & !EN25
         #  AIN25M2 &  EN25;

-- Node name is 'DOUTM3' 
-- Equation name is 'DOUTM3', location is LC065, type is output.
 DOUTM3  = LCELL( _EQ012 $  GND);
  _EQ012 = !EN5B & !EN5M & !EN15 & !EN25 &  _LC068
         #  AIN53 &  EN5B & !EN15 & !EN25
         #  AIN15M3 & !EN5M &  EN15 & !EN25
         #  AIN53 &  EN5M & !EN25
         #  AIN25M3 &  EN25;

-- Node name is 'DOUTM4' 
-- Equation name is 'DOUTM4', location is LC067, type is output.
 DOUTM4  = LCELL( _EQ013 $  GND);
  _EQ013 = !EN5B & !EN5M & !EN15 & !EN25 &  _LC080
         #  AIN54 &  EN5B & !EN15 & !EN25
         #  AIN15M4 & !EN5M &  EN15 & !EN25
         #  AIN54 &  EN5M & !EN25
         #  AIN25M4 &  EN25;

-- Node name is 'DOUTM5' 
-- Equation name is 'DOUTM5', location is LC091, type is output.
 DOUTM5  = LCELL( _EQ014 $  GND);
  _EQ014 = !EN5B & !EN5M & !EN15 & !EN25 &  _LC095
         #  AIN55 &  EN5B & !EN15 & !EN25
         #  AIN15M5 & !EN5M &  EN15 & !EN25
         #  AIN55 &  EN5M & !EN25
         #  AIN25M5 &  EN25;

-- Node name is 'DOUTM6' 
-- Equation name is 'DOUTM6', location is LC104, type is output.
 DOUTM6  = LCELL( _EQ015 $  GND);
  _EQ015 = !EN5B & !EN5M & !EN15 & !EN25 &  _LC111
         #  AIN56 &  EN5B & !EN15 & !EN25
         #  AIN15M6 & !EN5M &  EN15 & !EN25
         #  AIN56 &  EN5M & !EN25
         #  AIN25M6 &  EN25;

-- Node name is 'DOUTM7' 
-- Equation name is 'DOUTM7', location is LC120, type is output.
 DOUTM7  = LCELL( _EQ016 $  GND);
  _EQ016 = !EN5B & !EN5M & !EN15 & !EN25 &  _LC116
         #  AIN57 &  EN5B & !EN15 & !EN25
         #  AIN15M7 & !EN5M &  EN15 & !EN25
         #  AIN57 &  EN5M & !EN25
         #  AIN25M7 &  EN25;