cnt15.fit

这是本人在Max plus2环境下用VHDL语言编的交通灯控制程序。做EDA课程设计的朋友可以下来参考参考。

-- MAX+plus II Compiler Fit File      
-- Version 10.12 09/21/2001           
-- Compiled: 06/07/2006 22:21:54      

-- Copyright (C) 1988-2001 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "cnt15"
BEGIN

    DEVICE = "EPM7128SLC84-15";

    "CLK"                          : INPUT_PIN  = 83     ;
    "EN15"                         : INPUT_PIN  = 12     ; -- LC3
    "SB"                           : INPUT_PIN  = 10     ; -- LC6
    "SM"                           : INPUT_PIN  = 11     ; -- LC5
    "DOUT15B0"                     : OUTPUT_PIN = 73     ; -- LC115
    "DOUT15B1"                     : OUTPUT_PIN = 77     ; -- LC123
    "DOUT15B2"                     : OUTPUT_PIN = 68     ; -- LC105
    "DOUT15B3"                     : OUTPUT_PIN = 67     ; -- LC104
    "DOUT15B4"                     : OUTPUT_PIN = 65     ; -- LC101
    "DOUT15B5"                     : OUTPUT_PIN = 64     ; -- LC99
    "DOUT15B6"                     : OUTPUT_PIN = 63     ; -- LC97
    "DOUT15B7"                     : OUTPUT_PIN = 69     ; -- LC107
    "DOUT15M0"                     : OUTPUT_PIN = 74     ; -- LC117
    "DOUT15M1"                     : OUTPUT_PIN = 75     ; -- LC118
    "DOUT15M2"                     : OUTPUT_PIN = 76     ; -- LC120
    "DOUT15M3"                     : OUTPUT_PIN = 81     ; -- LC128
    "DOUT15M4"                     : OUTPUT_PIN = 80     ; -- LC126
    "DOUT15M5"                     : OUTPUT_PIN = 79     ; -- LC125
    "DOUT15M6"                     : OUTPUT_PIN = 70     ; -- LC109
    "DOUT15M7"                     : OUTPUT_PIN = 54     ; -- LC83
    "|LPM_ADD_SUB:101|addcore:adder|addcore:adder0|result_node1" : LOCATION   = LC122  ;
    "|LPM_ADD_SUB:101|addcore:adder|addcore:adder0|result_node2" : LOCATION   = LC121  ;
    "|LPM_ADD_SUB:101|addcore:adder|addcore:adder0|result_node3" : LOCATION   = LC119  ;
    ":21"                          : LOCATION   = LC114  ;  -- CNT5B3
    ":22"                          : LOCATION   = LC116  ;  -- CNT5B2
    ":23"                          : LOCATION   = LC113  ;  -- CNT5B1

END;

INTERNAL_INFO "cnt15"
BEGIN
	DEVICE = EPM7128SLC84-15;
	LC83    : LORAX = "G47R0";
	LC109   : LORAX = "G138R0";
	LC125   : LORAX = "G199R0";
	LC126   : LORAX = "G200R0";
	LC128   : LORAX = "G202R0";
	LC120   : LORAX = "G113R0";
	LC118   : LORAX = "G111R0";
	LC117   : LORAX = "G110R0";
	LC107   : LORAX = "G197R0";
	LC97    : LORAX = "G106R0";
	LC99    : LORAX = "G108R0";
	LC101   : LORAX = "G49R0";
	LC104   : LORAX = "G52R0";
	LC105   : LORAX = "G195R0";
	LC123   : LORAX = "G144R0";
	LC115   : LORAX = "G55R0,PA3R0C7";
	LC114   : LORAX = "G54R0,PA5R0C6,PA5R0C7";
	OH2R0P12 : LORAX = "G148R0,PA19R0C7";
	LC119   : LORAX = "G112R0,PA12R0C7";
	LC116   : LORAX = "G56R0,PA1R0C6,PA1R0C7";
	LC121   : LORAX = "G142R0,PA25R0C7";
	LC113   : LORAX = "G53R0,PA7R0C6,PA7R0C7";
	LC122   : LORAX = "G143R0,PA23R0C7";
	OH5R0P10 : LORAX = "G205R0,PA28R0C7";
	OH4R0P11 : LORAX = "G204R0,PA29R0C7";
END;