jtdkz.fit

这是本人在Max plus2环境下用VHDL语言编的交通灯控制程序。做EDA课程设计的朋友可以下来参考参考。

-- MAX+plus II Compiler Fit File      
-- Version 10.12 09/21/2001           
-- Compiled: 06/07/2006 23:01:59      

-- Copyright (C) 1988-2001 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "jtdkz"
BEGIN

    DEVICE = "EPM7128SLC84-15";

    "CLK"                          : INPUT_PIN  = 83     ;
    "SB"                           : INPUT_PIN  = 12     ; -- LC3
    "SM"                           : INPUT_PIN  = 11     ; -- LC5
    "BG"                           : OUTPUT_PIN = 76     ; -- LC120
    "BR"                           : OUTPUT_PIN = 64     ; -- LC99
    "BY"                           : OUTPUT_PIN = 79     ; -- LC125
    "MG"                           : OUTPUT_PIN = 81     ; -- LC128
    "MR"                           : OUTPUT_PIN = 65     ; -- LC101
    "MY"                           : OUTPUT_PIN = 68     ; -- LC105
    "|LPM_ADD_SUB:107|addcore:adder|addcore:adder0|gcp2" : LOCATION   = LC124  ;
    "|LPM_ADD_SUB:107|addcore:adder|addcore:adder0|result_node1" : LOCATION   = LC98   ;
    "|LPM_ADD_SUB:107|addcore:adder|addcore:adder0|result_node2" : LOCATION   = LC113  ;
    "|LPM_ADD_SUB:107|addcore:adder|addcore:adder0|result_node3" : LOCATION   = LC126  ; -- PIN 80
    "|LPM_ADD_SUB:107|addcore:adder|addcore:adder0|result_node4" : LOCATION   = LC121  ;
    ":16"                          : LOCATION   = LC122  ;  -- STATE1
    ":17"                          : LOCATION   = LC114  ;  -- STATE0
    ":18"                          : LOCATION   = LC115  ; -- PIN 73  -- S4
    ":19"                          : LOCATION   = LC116  ;  -- S3
    ":20"                          : LOCATION   = LC117  ; -- PIN 74  -- S2
    ":21"                          : LOCATION   = LC118  ; -- PIN 75  -- S1
    ":22"                          : LOCATION   = LC119  ;  -- S0
    ":23"                          : LOCATION   = LC100  ;  -- CLR
    ":24"                          : LOCATION   = LC97   ; -- PIN 63  -- EN
    "~748~1"                       : LOCATION   = LC123  ; -- PIN 77
    "~748~2"                       : LOCATION   = LC104  ; -- PIN 67

END;

INTERNAL_INFO "jtdkz"
BEGIN
	DEVICE = EPM7128SLC84-15;
	LC101   : LORAX = "G49R0";
	LC105   : LORAX = "G195R0";
	LC128   : LORAX = "G202R0";
	LC99    : LORAX = "G108R0";
	LC125   : LORAX = "G199R0";
	LC120   : LORAX = "G113R0";
	LC122   : LORAX = "G143R0,PA23R0C6,PA23R0C7";
	LC114   : LORAX = "G54R0,PA5R0C6,PA5R0C7";
	LC116   : LORAX = "G56R0,PA1R0C6,PA1R0C7";
	LC100   : LORAX = "G109R0,PA9R0C6,PA9R0C7";
	OH4R0P11 : LORAX = "G204R0,PA29R0C6,PA29R0C7";
	LC117   : LORAX = "G110R0,PA16R0C6,PA16R0C7";
	LC97    : LORAX = "G106R0,PA11R0C6,PA11R0C7";
	LC119   : LORAX = "G112R0,PA12R0C6,PA12R0C7";
	LC121   : LORAX = "G142R0,PA25R0C6,PA25R0C7";
	LC115   : LORAX = "G55R0,PA3R0C6,PA3R0C7";
	LC118   : LORAX = "G111R0,PA14R0C6,PA14R0C7";
	LC98    : LORAX = "G107R0,PA10R0C6,PA10R0C7";
	LC113   : LORAX = "G53R0,PA7R0C6,PA7R0C7";
	OH2R0P12 : LORAX = "G148R0,PA19R0C6,PA19R0C7";
	LC124   : LORAX = "G145R0,PA24R0C6";
	LC126   : LORAX = "G200R0,PA32R0C7";
	LC123   : LORAX = "G144R0,PA18R0C7";
	LC104   : LORAX = "G52R0,PA0R0C7";
END;