cnt5.fit

这是本人在Max plus2环境下用VHDL语言编的交通灯控制程序。做EDA课程设计的朋友可以下来参考参考。

-- MAX+plus II Compiler Fit File      
-- Version 10.12 09/21/2001           
-- Compiled: 06/07/2006 22:53:34      

-- Copyright (C) 1988-2001 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "cnt5"
BEGIN

    DEVICE = "EPM7128SLC84-15";

    "CLK"                          : INPUT_PIN  = 83     ;
    "EN5B"                         : INPUT_PIN  = 12     ; -- LC3
    "EN5M"                         : INPUT_PIN  = 11     ; -- LC5
    "DOUT50"                       : OUTPUT_PIN = 79     ; -- LC125
    "DOUT51"                       : OUTPUT_PIN = 80     ; -- LC126
    "DOUT52"                       : OUTPUT_PIN = 73     ; -- LC115
    "DOUT53"                       : OUTPUT_PIN = 74     ; -- LC117
    "DOUT54"                       : OUTPUT_PIN = 76     ; -- LC120
    "DOUT55"                       : OUTPUT_PIN = 75     ; -- LC118
    "DOUT56"                       : OUTPUT_PIN = 77     ; -- LC123
    "DOUT57"                       : OUTPUT_PIN = 81     ; -- LC128
    "|LPM_ADD_SUB:38|addcore:adder|addcore:adder0|result_node1" : LOCATION   = LC121  ;
    "|LPM_ADD_SUB:38|addcore:adder|addcore:adder0|result_node2" : LOCATION   = LC119  ;
    ":12"                          : LOCATION   = LC116  ;  -- CNT3B2
    ":13"                          : LOCATION   = LC114  ;  -- CNT3B1
    ":14"                          : LOCATION   = LC113  ;  -- CNT3B0

END;

INTERNAL_INFO "cnt5"
BEGIN
	DEVICE = EPM7128SLC84-15;
	LC128   : LORAX = "G202R0";
	LC123   : LORAX = "G144R0";
	LC118   : LORAX = "G111R0";
	LC120   : LORAX = "G113R0";
	LC117   : LORAX = "G110R0";
	LC115   : LORAX = "G55R0";
	LC126   : LORAX = "G200R0";
	LC125   : LORAX = "G199R0";
	LC116   : LORAX = "G56R0,PA1R0C7";
	OH4R0P11 : LORAX = "G204R0,PA29R0C7";
	OH2R0P12 : LORAX = "G148R0,PA19R0C7";
	LC119   : LORAX = "G112R0,PA12R0C7";
	LC114   : LORAX = "G54R0,PA5R0C7";
	LC121   : LORAX = "G142R0,PA25R0C7";
	LC113   : LORAX = "G53R0,PA7R0C7";
END;