top.fit

这是一个用MAX+PLUSII开发FPGA（1K30器件）开发的李沙育图形发生器（硬件描述语言部分）

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 05/30/2005 22:22:00      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "top"
BEGIN

    DEVICE = "EP1K30TC144-3";

    "clk"                          : INPUT_PIN  = 126    ;
    "ddin0"                        : INPUT_PIN  = 17     ;
    "ddin1"                        : INPUT_PIN  = 19     ;
    "ddin2"                        : INPUT_PIN  = 21     ;
    "ddin3"                        : INPUT_PIN  = 23     ;
    "ddin4"                        : INPUT_PIN  = 26     ;
    "ddin5"                        : INPUT_PIN  = 28     ;
    "ddin6"                        : INPUT_PIN  = 30     ;
    "ddin7"                        : INPUT_PIN  = 32     ;
    "keyclr"                       : INPUT_PIN  = 118    ;
    "keyfre"                       : INPUT_PIN  = 10     ;
    "keyphin"                      : INPUT_PIN  = 8      ;
    "adata0"                       : OUTPUT_PIN = 117    ;
    "adata1"                       : OUTPUT_PIN = 119    ;
    "adata2"                       : OUTPUT_PIN = 121    ;
    "adata3"                       : OUTPUT_PIN = 130    ;
    "adata4"                       : OUTPUT_PIN = 131    ;
    "adata5"                       : OUTPUT_PIN = 133    ;
    "adata6"                       : OUTPUT_PIN = 135    ;
    "adata7"                       : OUTPUT_PIN = 137    ;
    "bdata0"                       : OUTPUT_PIN = 100    ;
    "bdata1"                       : OUTPUT_PIN = 98     ;
    "bdata2"                       : OUTPUT_PIN = 96     ;
    "bdata3"                       : OUTPUT_PIN = 92     ;
    "bdata4"                       : OUTPUT_PIN = 90     ;
    "bdata5"                       : OUTPUT_PIN = 88     ;
    "bdata6"                       : OUTPUT_PIN = 86     ;
    "bdata7"                       : OUTPUT_PIN = 82     ;
    "|ACHANLE:8|LPM_ADD_SUB:127|addcore:adder|:79" : LOCATION   = LC7_C14;
    "|ACHANLE:8|LPM_ADD_SUB:127|addcore:adder|:83" : LOCATION   = LC3_C10;
    "|ACHANLE:8|LPM_ADD_SUB:127|addcore:adder|:87" : LOCATION   = LC4_C10;
    "|ACHANLE:8|LPM_ADD_SUB:127|addcore:adder|:95" : LOCATION   = LC7_C10;
    "|ACHANLE:8|:3"                : LOCATION   = LC3_C9 ;
    "|ACHANLE:8|:5"                : LOCATION   = LC1_C9 ;
    "|ACHANLE:8|:7"                : LOCATION   = LC1_C15;
    "|ACHANLE:8|:9"                : LOCATION   = LC1_C10;
    "|ACHANLE:8|:11"               : LOCATION   = LC1_C5 ;
    "|ACHANLE:8|:13"               : LOCATION   = LC1_C1 ;
    "|ACHANLE:8|:15"               : LOCATION   = LC5_C14;
    "|ACHANLE:8|:17"               : LOCATION   = LC2_C14;
    "|ACHANLE:8|:19"               : LOCATION   = LC1_C14;
    "|ACHANLE:8|:21"               : LOCATION   = LC2_C9 ;  -- |ACHANLE:8|acc8
    "|ACHANLE:8|:22"               : LOCATION   = LC5_C9 ;  -- |ACHANLE:8|acc7
    "|ACHANLE:8|:23"               : LOCATION   = LC5_C10;  -- |ACHANLE:8|acc6
    "|ACHANLE:8|:24"               : LOCATION   = LC8_C10;  -- |ACHANLE:8|acc5
    "|ACHANLE:8|:25"               : LOCATION   = LC3_C1 ;  -- |ACHANLE:8|acc4
    "|ACHANLE:8|:26"               : LOCATION   = LC6_C1 ;  -- |ACHANLE:8|acc3
    "|ACHANLE:8|:27"               : LOCATION   = LC6_C14;  -- |ACHANLE:8|acc2
    "|ACHANLE:8|:28"               : LOCATION   = LC4_C14;  -- |ACHANLE:8|acc1
    "|ACHANLE:8|:29"               : LOCATION   = LC3_C14;  -- |ACHANLE:8|acc0
    "|ACHANLE:8|~71~1"             : LOCATION   = LC4_C9 ;
    "|ACHANLE:8|~71~2"             : LOCATION   = LC6_C10;
    "|ACHANLE:8|:81"               : LOCATION   = LC2_C10;
    "adata0~fit~in1"               : LOCATION   = LC1_C7 ;
    "adata1~fit~in1"               : LOCATION   = LC1_C13;
    "adata2~fit~in1"               : LOCATION   = LC1_C17;
    "adata3~fit~in1"               : LOCATION   = LC1_C21;
    "adata4~fit~in1"               : LOCATION   = LC1_C23;
    "adata5~fit~in1"               : LOCATION   = LC1_C27;
    "adata6~fit~in1"               : LOCATION   = LC1_C29;
    "adata7~fit~in1"               : LOCATION   = LC1_C30;
    "|BCHANLE:24|LPM_ADD_SUB:160|addcore:adder|:79" : LOCATION   = LC4_A2 ;
    "|BCHANLE:24|LPM_ADD_SUB:160|addcore:adder|:83" : LOCATION   = LC5_D16;
    "|BCHANLE:24|LPM_ADD_SUB:160|addcore:adder|:91" : LOCATION   = LC4_D16;
    "|BCHANLE:24|LPM_ADD_SUB:160|addcore:adder|:95" : LOCATION   = LC4_D6 ;
    "|BCHANLE:24|:3"               : LOCATION   = LC7_D8 ;
    "|BCHANLE:24|:5"               : LOCATION   = LC8_D8 ;
    "|BCHANLE:24|:7"               : LOCATION   = LC3_D6 ;
    "|BCHANLE:24|:9"               : LOCATION   = LC2_D14;
    "|BCHANLE:24|:11"              : LOCATION   = LC2_D16;
    "|BCHANLE:24|:13"              : LOCATION   = LC1_D16;
    "|BCHANLE:24|:15"              : LOCATION   = LC5_A2 ;
    "|BCHANLE:24|:17"              : LOCATION   = LC1_A2 ;
    "|BCHANLE:24|:19"              : LOCATION   = LC3_A2 ;
    "|BCHANLE:24|:21"              : LOCATION   = LC1_D6 ;  -- |BCHANLE:24|acc8
    "|BCHANLE:24|:22"              : LOCATION   = LC2_D6 ;  -- |BCHANLE:24|acc7
    "|BCHANLE:24|:23"              : LOCATION   = LC5_D6 ;  -- |BCHANLE:24|acc6
    "|BCHANLE:24|:24"              : LOCATION   = LC7_D16;  -- |BCHANLE:24|acc5
    "|BCHANLE:24|:25"              : LOCATION   = LC6_D16;  -- |BCHANLE:24|acc4
    "|BCHANLE:24|:26"              : LOCATION   = LC8_D16;  -- |BCHANLE:24|acc3
    "|BCHANLE:24|:27"              : LOCATION   = LC2_A2 ;  -- |BCHANLE:24|acc2
    "|BCHANLE:24|:28"              : LOCATION   = LC6_A2 ;  -- |BCHANLE:24|acc1
    "|BCHANLE:24|:29"              : LOCATION   = LC7_A2 ;  -- |BCHANLE:24|acc0
    "|BCHANLE:24|:81"              : LOCATION   = LC7_D6 ;
    "|BCHANLE:24|:88"              : LOCATION   = LC3_D16;
    "|BCHANLE:24|:114"             : LOCATION   = LC6_D6 ;
    "bdata0~fit~in1"               : LOCATION   = LC8_A7 ;
    "bdata1~fit~in1"               : LOCATION   = LC6_B9 ;
    "bdata2~fit~in1"               : LOCATION   = LC4_C11;
    "bdata3~fit~in1"               : LOCATION   = LC1_D2 ;
    "bdata4~fit~in1"               : LOCATION   = LC5_D10;
    "bdata5~fit~in1"               : LOCATION   = LC8_D3 ;
    "bdata6~fit~in1"               : LOCATION   = LC4_E13;
    "bdata7~fit~in1"               : LOCATION   = LC1_F17;
    "|BFENPIN:15|LPM_ADD_SUB:63|addcore:adder|:55" : LOCATION   = LC7_D7 ;
    "|BFENPIN:15|:7"               : LOCATION   = LC3_D7 ;
    "|BFENPIN:15|:9"               : LOCATION   = LC6_D7 ;  -- |BFENPIN:15|acc3
    "|BFENPIN:15|:10"              : LOCATION   = LC1_D7 ;  -- |BFENPIN:15|acc2
    "|BFENPIN:15|:11"              : LOCATION   = LC2_D7 ;  -- |BFENPIN:15|acc1
    "|BFENPIN:15|:12"              : LOCATION   = LC4_D7 ;  -- |BFENPIN:15|acc0
    "|BFENPIN:15|:30"              : LOCATION   = LC5_D7 ;
    "|HZ100:6|LPM_ADD_SUB:40|addcore:adder|:79" : LOCATION   = LC1_A11;
    "|HZ100:6|LPM_ADD_SUB:40|addcore:adder|:91" : LOCATION   = LC2_A3 ;
    "|HZ100:6|:2"                  : LOCATION   = LC5_A12;
    "|HZ100:6|:4"                  : LOCATION   = LC4_A12;  -- |HZ100:6|acc8
    "|HZ100:6|:5"                  : LOCATION   = LC3_A12;  -- |HZ100:6|acc7
    "|HZ100:6|:6"                  : LOCATION   = LC2_A12;  -- |HZ100:6|acc6
    "|HZ100:6|:7"                  : LOCATION   = LC6_A3 ;  -- |HZ100:6|acc5
    "|HZ100:6|:8"                  : LOCATION   = LC5_A3 ;  -- |HZ100:6|acc4
    "|HZ100:6|:9"                  : LOCATION   = LC4_A3 ;  -- |HZ100:6|acc3
    "|HZ100:6|:10"                 : LOCATION   = LC8_A11;  -- |HZ100:6|acc2
    "|HZ100:6|:11"                 : LOCATION   = LC7_A11;  -- |HZ100:6|acc1
    "|HZ100:6|:12"                 : LOCATION   = LC6_A11;  -- |HZ100:6|acc0
    "|MCU:33|:12"                  : LOCATION   = LC5_F5 ;
    "|MCU:33|:14"                  : LOCATION   = LC1_F5 ;
    "|MCU:33|:16"                  : LOCATION   = LC7_A4 ;
    "|MCU:33|:18"                  : LOCATION   = LC8_A4 ;
    "|MCU:33|:20"                  : LOCATION   = LC1_D18;
    "|MCU:33|:22"                  : LOCATION   = LC7_D15;