📄 rfc1792.txt
字号:
Network Working Group T. SungRequest for Comments: 1792 Novell, Inc.Category: Experimental April 1995 TCP/IPX Connection Mib SpecificationStatus of this Memo This document defines an Experimental Protocol for the Internet community. This does not specify an Internet standard of any kind. Discussion and suggestions for improvement are requested. Distribution of this memo is unlimited.IESG Note: Internet Engineering Steering Group comment from the Area Director for Transport Services: Please note well that this memo is an individual product of the author. Implementation experience, particularly on the effectiveness of the protocols in dual-stack environments, is needed.1. Introduction Traditionally, TCP and UDP runs over IP. STD 17, RFC 1213 defines TCP connection MIB object and UDP listener object assuming just that. For TCP and UDP running over IPX, tcpConnTable and udpTable objects from RFC 1213 cannot be used since they define the address to be of type IpAddress. As such, we need to define new objects that can properly describe TCP and UDP connections over IPX. New MIB objects, tcpIpxConnTable, udpIpxTable, tcpUnspecConnTable and udpUnspecTable are presented in this paper, to be used in place of tcpConnTable and udpListenerTable when TCP and UDP are running over IPX.2. Objects TCPIPX-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212; -- IPX address type. -- First 4 octests are the network numbers and the last 6 -- octests are the node numbers. In ascii, it is representedSung [Page 1]RFC 1792 TCP/IPX MIB April 1995 -- as hex digits, as in: nnnnnnnn:mmmmmmmmmmmm IpxAddress ::= OCTET STRING (size (10)) -- TCP/IPX MIB object idenfifiers novell OBJECT IDENTIFIER ::= { enterprises 23 } mibDoc OBJECT IDENTIFIER ::= { novell 2 } tcpx OBJECT IDENTIFIER ::= { mibDoc 29 } tcpxTcp OBJECT IDENTIFIER ::= { tcpx 1 } tcpxUdp OBJECT IDENTIFIER ::= { tcpx 2 } -- the TCP/IPX Connection table -- The TCP/IPX connection table contains information -- about this entity's existing TCP connections over -- IPX. tcpIpxConnTable OBJECT-TYPE SYNTAX SEQUENCE OF TcpIpxConnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing information specific on TCP connection over IPX network layer." ::= { tcpxTcp 1 } tcpIpxConnEntry OBJECT-TYPE SYNTAX TcpIpxConnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a particular current TCP connection over IPX An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state." INDEX { tcpIpxConnLocalAddress, tcpIpxConnLocalPort, tcpIpxConnRemAddress, tcpIpxConnRemPort } ::= { tcpIpxConnTable 1 } TcpIpxConnEntry ::= SEQUENCE {Sung [Page 2]RFC 1792 TCP/IPX MIB April 1995 tcpIpxConnState INTEGER, tcpIpxConnLocalAddress IpxAddress tcpIpxConnLocalPort INTEGER (0..65535), tcpIpxConnRemAddress IpxAddress, tcpIpxConnRemPort INTEGER (0..65535) } tcpIpxConnState OBJECT-TYPE SYNTAX INTEGER { closed(1), listen(2), synSent(3), synReceived(4), established(5), finWait1(6), finWait2(7), closeWait(8), lastAck(9), closing(10), timeWait(11), deleteTCB(12) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RSTSung [Page 3]RFC 1792 TCP/IPX MIB April 1995 segments are not sent reliably)." ::= { tcpIpxConnEntry 1 } tcpIpxConnLocalAddress OBJECT-TYPE SYNTAX IpxAddress ACCESS read-only STATUS mandatory DESCRIPTION "The local IPX address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any interface, the value 00000000:000000000000 is used. See tcpUnspecConnTable for connections in the listen state which is willing to accept connects for any IP interface associated with the node." ::= { tcpIpxConnEntry 2 } -- NetworkAddress defined in SMI only include IP currently, -- so we can't use it to represent both IP and IPX address. tcpIpxConnLocalPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The local port number for this TCP connection." ::= { tcpIpxConnEntry 3 } tcpIpxConnRemAddress OBJECT-TYPE SYNTAX IpxAddress ACCESS read-only STATUS mandatory DESCRIPTION "The remote IPX address for this TCP connection." ::= { tcpIpxConnEntry 4 } tcpIpxConnRemPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The remote port number for this TCP connection." ::= { tcpIpxConnEntry 5 }Sung [Page 4]RFC 1792 TCP/IPX MIB April 1995 -- the UDP Listener table -- The UDP listener table contains information about this -- entity's UDP end-points on which a local application is -- currently accepting datagrams. udpIpxTable OBJECT-TYPE SYNTAX SEQUENCE OF UdpIpxEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing UDP listener information." ::= { tcpxUdp 1 } udpIpxEntry OBJECT-TYPE SYNTAX UdpIpxEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a particular current UDP listener." INDEX { udpIpxLocalAddress, udpIpxLocalPort } ::= { udpIpxTable 1 }
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -