rfc2213.txt

著名的RFC文档,其中有一些文档是已经翻译成中文的的.


RFC 2213          Integrated Services MIB using SMIv2     September 1997


    intSrvIfAttribPropagationDelay OBJECT-TYPE
        SYNTAX      Integer32
        UNITS       "microseconds"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
           "The amount of propagation delay that this  in-
           terface  introduces  in addition to that intro-
           diced by bit propagation delays."
       DEFVAL { 0 }-- by default, interfaces are presumed to add
                   -- no extra delays
       ::= { intSrvIfAttribEntry 5 }


    intSrvIfAttribStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
           "'active' on interfaces that are configured for
           RSVP."
       ::= { intSrvIfAttribEntry 6 }


--      The Integrated Services Active Flows Database
--      lists all flows active on an outgoing interface, including
--      relevant attributes.


    intSrvFlowTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF IntSrvFlowEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
           "Information describing the reserved flows  us-
           ing the system's interfaces."
       ::= { intSrvObjects 2 }


    intSrvFlowEntry OBJECT-TYPE
        SYNTAX      IntSrvFlowEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
           "Information describing the use of a given  in-
           terface   by   a   given   flow.   The  counter
           intSrvFlowPoliced starts counting  at  the  in-
           stallation of the flow."



Baker, et. al.              Standards Track                     [Page 8]

RFC 2213          Integrated Services MIB using SMIv2     September 1997


       INDEX { intSrvFlowNumber }
       ::= { intSrvFlowTable 1 }


    IntSrvFlowEntry ::=
        SEQUENCE {
            intSrvFlowNumber                  SessionNumber,
            intSrvFlowType                    SessionType,
            intSrvFlowOwner                   INTEGER,
            intSrvFlowDestAddr                OCTET STRING,
            intSrvFlowSenderAddr              OCTET STRING,
            intSrvFlowDestAddrLength          INTEGER,
            intSrvFlowSenderAddrLength        INTEGER,
            intSrvFlowProtocol                Protocol,
            intSrvFlowDestPort                Port,
            intSrvFlowPort                    Port,
            intSrvFlowFlowId                  INTEGER,
            intSrvFlowInterface               InterfaceIndex,
            intSrvFlowIfAddr                  OCTET STRING,
            intSrvFlowRate                    BitRate,
            intSrvFlowBurst                   BurstSize,
            intSrvFlowWeight                  Integer32,
            intSrvFlowQueue                   Integer32,
            intSrvFlowMinTU                   MessageSize,
            intSrvFlowMaxTU                   MessageSize,
            intSrvFlowBestEffort              Counter32,
            intSrvFlowPoliced                 Counter32,
            intSrvFlowDiscard                 TruthValue,
            intSrvFlowService                 QosService,
            intSrvFlowOrder                   INTEGER,
            intSrvFlowStatus                  RowStatus
        }


    intSrvFlowNumber OBJECT-TYPE
        SYNTAX      SessionNumber
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
           "The number of this flow.  This is for SNMP In-
           dexing purposes only and has no relation to any
           protocol value."
       ::= { intSrvFlowEntry 1 }


    intSrvFlowType OBJECT-TYPE
        SYNTAX      SessionType
        MAX-ACCESS  read-create



Baker, et. al.              Standards Track                     [Page 9]

RFC 2213          Integrated Services MIB using SMIv2     September 1997


        STATUS      current
        DESCRIPTION
           "The type of session (IP4, IP6, IP6  with  flow
           information, etc)."
       ::= { intSrvFlowEntry 2 }


    intSrvFlowOwner OBJECT-TYPE
        SYNTAX      INTEGER {
                         other(1),
                         rsvp(2),
                         management(3)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
           "The process that installed this  flow  in  the
           queue policy database."
       ::= { intSrvFlowEntry 3 }


    intSrvFlowDestAddr OBJECT-TYPE
        SYNTAX      OCTET STRING (SIZE(4..16))
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
           "The destination address used by all senders in
           this  session.   This object may not be changed
           when the value of the RowStatus object is  'ac-
           tive'."
       ::= { intSrvFlowEntry 4 }


    intSrvFlowSenderAddr OBJECT-TYPE
        SYNTAX      OCTET STRING (SIZE(4..16))
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
           "The source address of the sender  selected  by
           this  reservation.  The value of all zeroes in-
           dicates 'all senders'.  This object may not  be
           changed  when the value of the RowStatus object
           is 'active'."
       ::= { intSrvFlowEntry 5 }


    intSrvFlowDestAddrLength OBJECT-TYPE
        SYNTAX      INTEGER(0..128)



Baker, et. al.              Standards Track                    [Page 10]

RFC 2213          Integrated Services MIB using SMIv2     September 1997


        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
           "The length of the destination address in bits.
           This  is  the CIDR Prefix Length, which for IP4
           hosts and multicast addresses is 32 bits.  This
           object may not be changed when the value of the
           RowStatus object is 'active'."
       ::= { intSrvFlowEntry 6 }


    intSrvFlowSenderAddrLength OBJECT-TYPE
        SYNTAX      INTEGER(0..128)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
           "The length of the sender's  address  in  bits.
           This  is  the CIDR Prefix Length, which for IP4
           hosts and multicast addresses is 32 bits.  This
           object may not be changed when the value of the
           RowStatus object is 'active'."
               ::= { intSrvFlowEntry 7 }


    intSrvFlowProtocol OBJECT-TYPE
        SYNTAX      Protocol
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
           "The IP Protocol used by a session.   This  ob-
           ject  may  not be changed when the value of the
           RowStatus object is 'active'."
       ::= { intSrvFlowEntry 8 }


    intSrvFlowDestPort OBJECT-TYPE
        SYNTAX      Port
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
           "The UDP or TCP port number used as a  destina-
           tion  port for all senders in this session.  If
           the  IP   protocol   in   use,   specified   by
           intSrvResvFwdProtocol,  is 50 (ESP) or 51 (AH),
           this  represents  a  virtual  destination  port
           number.   A value of zero indicates that the IP
           protocol in use does not have ports.  This  ob-
           ject  may  not be changed when the value of the



Baker, et. al.              Standards Track                    [Page 11]

RFC 2213          Integrated Services MIB using SMIv2     September 1997


           RowStatus object is 'active'."
       ::= { intSrvFlowEntry 9 }


    intSrvFlowPort OBJECT-TYPE
        SYNTAX      Port
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
           "The UDP or TCP port number used  as  a  source
           port  for  this sender in this session.  If the
           IP    protocol    in    use,    specified    by
           intSrvResvFwdProtocol  is  50 (ESP) or 51 (AH),
           this represents a generalized  port  identifier
           (GPI).   A  value of zero indicates that the IP
           protocol in use does not have ports.  This  ob-
           ject  may  not be changed when the value of the
           RowStatus object is 'active'."
       ::= { intSrvFlowEntry 10 }


    intSrvFlowFlowId OBJECT-TYPE
        SYNTAX      INTEGER (0..16777215)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
           "The flow ID that  this  sender  is  using,  if
           this  is  an IPv6 session."
       ::= { intSrvFlowEntry 11 }


    intSrvFlowInterface OBJECT-TYPE
        SYNTAX      InterfaceIndex
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
           "The ifIndex value of the  interface  on  which
           this reservation exists."
       ::= { intSrvFlowEntry 12 }


    intSrvFlowIfAddr OBJECT-TYPE
        SYNTAX      OCTET STRING (SIZE(4..16))
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
           "The IP Address on the ifEntry  on  which  this
           reservation  exists.  This is present primarily



Baker, et. al.              Standards Track                    [Page 12]

RFC 2213          Integrated Services MIB using SMIv2     September 1997


           to support those interfaces which layer  multi-
           ple IP Addresses on the interface."
       ::= { intSrvFlowEntry 13 }


    intSrvFlowRate OBJECT-TYPE
        SYNTAX      BitRate
        UNITS       "bits per second"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
           "The Reserved Rate of the sender's data stream.
           If this is a Controlled Load service flow, this
           rate is derived from the Tspec  rate  parameter
           (r).   If  this  is  a Guaranteed service flow,
           this rate is derived from  the  Rspec  clearing
           rate parameter (R)."
       ::= { intSrvFlowEntry 14 }


    intSrvFlowBurst OBJECT-TYPE
        SYNTAX      BurstSize
        UNITS       "bytes"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
           "The size of the largest  burst  expected  from
           the sender at a time.

           If this is less than  the  sender's  advertised
           burst  size, the receiver is asking the network
           to provide flow pacing  beyond  what  would  be
           provided  under normal circumstances. Such pac-
           ing is at the network's option."
       ::= { intSrvFlowEntry 15 }


    intSrvFlowWeight OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
           "The weight used  to  prioritize  the  traffic.
           Note  that the interpretation of this object is
           implementation-specific,   as   implementations
           vary in their use of weighting procedures."
       ::= { intSrvFlowEntry 16 }




Baker, et. al.              Standards Track                    [Page 13]

RFC 2213          Integrated Services MIB using SMIv2     September 1997


    intSrvFlowQueue OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
           "The number of the queue used by this  traffic.
           Note  that the interpretation of this object is
           implementation-specific,   as   implementations
           vary in their use of queue identifiers."
       ::= { intSrvFlowEntry 17 }


    intSrvFlowMinTU OBJECT-TYPE
        SYNTAX      MessageSize
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
           "The minimum message size for  this  flow.  The
           policing  algorithm will treat smaller messages
           as though they are this size."
       ::= { intSrvFlowEntry 18 }


    intSrvFlowMaxTU OBJECT-TYPE
        SYNTAX      MessageSize
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
           "The maximum datagram size for this  flow  that
           will conform to the traffic specification. This
           value cannot exceed the MTU of the interface."
       ::= { intSrvFlowEntry 19 }


    intSrvFlowBestEffort OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
           "The number of packets that  were  remanded  to
           best effort service."
       ::= { intSrvFlowEntry 20 }


    intSrvFlowPoliced OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current



Baker, et. al.              Standards Track                    [Page 14]

RFC 2213          Integrated Services MIB using SMIv2     September 1997