rfc2670.txt

著名的RFC文档,其中有一些文档是已经翻译成中文的的.

docsIfDownChannelFrequency  OBJECT-TYPE
        SYNTAX      Integer32 (0..1000000000)
        UNITS       "hertz"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The center of the downstream frequency associated with
             this channel. This object will return the current tuner
             frequency. If a CMTS provides IF output, this object
             will return 0, unless this CMTS is in control of the
             final downstream RF frequency.  See the associated



St. Johns                       Standard                       [Page 20]

RFC 2670                DOCSIS RF Interface MIB              August 1999


             compliance object for a description of valid frequencies
             that may be written to this object."
        REFERENCE
            "DOCSIS Radio Frequency Interface Specification,
             Section 4.3.3."
        ::= { docsIfDownstreamChannelEntry 2 }

docsIfDownChannelWidth  OBJECT-TYPE
        SYNTAX      Integer32 (0..16000000)
        UNITS       "hertz"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The bandwidth of this downstream channel. Most
             implementations are expected to support a channel width
             of 6 MHz (North America) and/or 8 MHz (Europe).  See the
             associated compliance object for a description of the
             valid channel widths for this object."
        REFERENCE
            "DOCSIS Radio Frequency Interface Specification,
             Table 4-12 and Table 4-13."
        ::= { docsIfDownstreamChannelEntry 3 }

docsIfDownChannelModulation OBJECT-TYPE
        SYNTAX      INTEGER {
            unknown(1),
            other(2),
            qam64(3),
            qam256(4)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The modulation type associated with this downstream
             channel. If the interface is down, this object either
             returns the configured value (CMTS), the most current
             value (CM), or the value of unknown(1).  See the
             associated conformance object for write conditions and
             limitations. See the reference for specifics on the
             modulation profiles implied by qam64 and qam256."
        REFERENCE
            "DOCSIS Radio Frequency Interface Specification,
             Section 3.6.2."
        ::= { docsIfDownstreamChannelEntry 4 }

docsIfDownChannelInterleave OBJECT-TYPE
        SYNTAX      INTEGER {
            unknown(1),



St. Johns                       Standard                       [Page 21]

RFC 2670                DOCSIS RF Interface MIB              August 1999


            other(2),
            taps8Increment16(3),
            taps16Increment8(4),
            taps32Increment4(5),
            taps64Increment2(6),
            taps128Increment1(7)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The Forward Error Correction (FEC) interleaving used
             for this downstream channel.
             Values are defined as follows:
             taps8Increment16(3):   protection 5.9/4.1 usec,
                                    latency .22/.15 msec
             taps16Increment8(4):   protection 12/8.2 usec,
                                    latency .48/.33 msec
             taps32Increment4(5):   protection 24/16 usec,
                                    latency .98/.68 msec
             taps64Increment2(6):   protection 47/33 usec,
                                    latency 2/1.4 msec
             taps128Increment1(7):  protection 95/66 usec,
                                    latency 4/2.8 msec
             If the interface is down, this object either returns
             the configured value (CMTS), the most current value (CM),
             or the value of unknown(1).
             The value of other(2) is returned if the interleave
             is known but not defined in the above list.
             See the associated conformance object for write
             conditions and limitations. See the reference for the FEC
             configuration described by the setting of this object."
        REFERENCE
            "DOCSIS Radio Frequency Interface Specification,
             Section 4.3.2."
        ::= { docsIfDownstreamChannelEntry 5 }

docsIfDownChannelPower OBJECT-TYPE
        SYNTAX      TenthdBmV
        UNITS       "dBmV"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "At the CMTS, the operational transmit power. At the CM,
             the received power level. May be set to zero at the CM
             if power level measurement is not supported.
             If the interface is down, this object either returns
             the configured value (CMTS), the most current value (CM)
             or the value of 0. See the associated conformance object



St. Johns                       Standard                       [Page 22]

RFC 2670                DOCSIS RF Interface MIB              August 1999


             for write conditions and limitations. See the reference
             for recommended and required power levels."
        REFERENCE
            "DOCSIS Radio Frequency Interface Specification,
             Table 4-12 and Table 4-13."
        ::= { docsIfDownstreamChannelEntry 6 }

--
-- The following table is implemented on both the CM and the CMTS.
-- For the CM, only attached channels appear in the table.  For the
-- CM, this table is read only as well.
--

docsIfUpstreamChannelTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DocsIfUpstreamChannelEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table describes the attributes of attached upstream
             channels (frequency bands)."
        ::= { docsIfBaseObjects 2 }

docsIfUpstreamChannelEntry OBJECT-TYPE
        SYNTAX      DocsIfUpstreamChannelEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "List of attributes for a single upstream channel.
             An entry in this table exists for each ifEntry with an
             ifType of docsCableUpstream(129)."
        INDEX { ifIndex }
        ::= { docsIfUpstreamChannelTable 1 }

DocsIfUpstreamChannelEntry ::= SEQUENCE {
            docsIfUpChannelId                     Integer32,
            docsIfUpChannelFrequency              Integer32,
            docsIfUpChannelWidth                  Integer32,
            docsIfUpChannelModulationProfile      Unsigned32,
            docsIfUpChannelSlotSize               Unsigned32,
            docsIfUpChannelTxTimingOffset         Unsigned32,
            docsIfUpChannelRangingBackoffStart    Integer32,
            docsIfUpChannelRangingBackoffEnd      Integer32,
            docsIfUpChannelTxBackoffStart         Integer32,
            docsIfUpChannelTxBackoffEnd           Integer32
        }

docsIfUpChannelId OBJECT-TYPE
        SYNTAX      Integer32 (0..255)



St. Johns                       Standard                       [Page 23]

RFC 2670                DOCSIS RF Interface MIB              August 1999


        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The CMTS identification of the upstream channel."
        ::= { docsIfUpstreamChannelEntry 1 }

docsIfUpChannelFrequency OBJECT-TYPE
        SYNTAX      Integer32 (0..1000000000)
        UNITS       "hertz"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The center of the frequency band associated with this
             upstream channel. This object returns 0 if the frequency
             is undefined or unknown. Minimum permitted upstream
             frequency is 5,000,000 Hz for current technology.  See
             the associated conformance object for write conditions
             and limitations."
        REFERENCE
            "DOCSIS Radio Frequency Interface Specification,
             Table 2-2."
        ::= { docsIfUpstreamChannelEntry 2 }

docsIfUpChannelWidth OBJECT-TYPE
        SYNTAX      Integer32 (0..20000000)
        UNITS       "hertz"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The bandwidth of this upstream channel. This object
             returns 0 if the channel width is undefined or unknown.
             Minimum permitted channel width is 200,000 Hz currently.
             See the associated conformance object for write conditions
             and limitations."
        REFERENCE
            "DOCSIS Radio Frequency Interface Specification,
             Table 4-3."
        ::= { docsIfUpstreamChannelEntry 3 }

docsIfUpChannelModulationProfile OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "An entry identical to the docsIfModIndex in the
             docsIfCmtsModulationTable that describes this channel.
             This channel is further instantiated there by a grouping
             of interval usage codes which together fully describe the



St. Johns                       Standard                       [Page 24]

RFC 2670                DOCSIS RF Interface MIB              August 1999


             channel modulation. This object returns 0 if the
             docsIfCmtsModulationTable entry does not exist or
             docsIfCmtsModulationTable is empty. See
             the associated conformance object for write conditions
             and limitations."
        ::= { docsIfUpstreamChannelEntry 4 }

docsIfUpChannelSlotSize OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The number of 6.25 microsecond ticks in each upstream mini-
             slot. Returns zero if the value is undefined or unknown.
             See the associated conformance object for write
             conditions and limitations."
        REFERENCE
            "DOCSIS Radio Frequency Interface Specification,
             Section 6.1.2.4."
        ::= { docsIfUpstreamChannelEntry 5 }

docsIfUpChannelTxTimingOffset OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "A measure of the current round trip time at the CM, or the
             maximum round trip time seen by the CMTS.  Used for timing
             of CM upstream transmissions to ensure synchronized
             arrivals at the CMTS. Units are in terms of
             (6.25 microseconds/64)."
        REFERENCE
            "DOCSIS Radio Frequency Interface Specification,
             Section 6.5."
        ::= { docsIfUpstreamChannelEntry 6 }

docsIfUpChannelRangingBackoffStart OBJECT-TYPE
        SYNTAX      Integer32 (0..16)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The initial random backoff window to use when retrying
             Ranging Requests. Expressed as a power of 2. A value of 16
             at the CMTS indicates that a proprietary adaptive retry
             mechanism is to be used. See the associated conformance
             object for write conditions and limitations."
        REFERENCE
            "DOCSIS Radio Frequency Interface Specification,



St. Johns                       Standard                       [Page 25]

RFC 2670                DOCSIS RF Interface MIB              August 1999


             Section 6.4.4."
        ::= { docsIfUpstreamChannelEntry 7 }

docsIfUpChannelRangingBackoffEnd OBJECT-TYPE
        SYNTAX      Integer32 (0..16)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The final random backoff window to use when retrying
             Ranging Requests. Expressed as a power of 2. A value of 16
             at the CMTS indicates that a proprietary adaptive retry
             mechanism is to be used. See the associated conformance
             object for write conditions and limitations."
        REFERENCE
            "DOCSIS Radio Frequency Interface Specification,
             Section 6.4.4."
        ::= { docsIfUpstreamChannelEntry 8 }

docsIfUpChannelTxBackoffStart OBJECT-TYPE
        SYNTAX      Integer32 (0..16)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The initial random backoff window to use when retrying
             transmissions. Expressed as a power of 2. A value of 16
             at the CMTS indicates that a proprietary adaptive retry
             mechanism is to be used. See the associated conformance
             object for write conditions and limitations."
        REFERENCE
            "DOCSIS Radio Frequency Interface Specification,
             Section 6.4.4."
        ::= { docsIfUpstreamChannelEntry 9 }

docsIfUpChannelTxBackoffEnd OBJECT-TYPE
        SYNTAX      Integer32 (0..16)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The final random backoff window to use when retrying
             transmissions. Expressed as a power of 2. A value of 16
             at the CMTS indicates that a proprietary adaptive retry
             mechanism is to be used. See the associated conformance
             object for write conditions and limitations."
        REFERENCE
            "DOCSIS Radio Frequency Interface Specification,
             Section 6.4.4."
        ::= { docsIfUpstreamChannelEntry 10 }




St. Johns                       Standard                       [Page 26]

RFC 2670                DOCSIS RF Interface MIB              August 1999


-- The following table describes the attributes of each class of
-- service.  The entries in this table are referenced from the
-- docsIfServiceEntries.  They exist as a separate table in order to
-- reduce redundant information in docsIfServiceTable.
--
-- This table is implemented at both the CM and the CMTS.
-- The CM need only maintain entries for the classes of service
-- referenced by its docsIfServiceTable.
--

docsIfQosProfileTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DocsIfQosProfileEntry
        MAX-ACCESS  not-accessible
        STATUS      current