scan_led1000.map.eqn

Quartus环境下的1000进制计数器的扫描显示电路

-- Copyright (C) 1991-2005 Altera Corporation
-- Your use of Altera Corporation's design tools, logic functions 
-- and other software and tools, and its AMPP partner logic 
-- functions, and any output files any of the foregoing 
-- (including device programming or simulation files), and any 
-- associated documentation or information are expressly subject 
-- to the terms and conditions of the Altera Program License 
-- Subscription Agreement, Altera MegaCore Function License 
-- Agreement, or other applicable license agreement, including, 
-- without limitation, that your use is for the sole purpose of 
-- programming logic devices manufactured by Altera and sold by 
-- Altera or its authorized distributors.  Please refer to the 
-- applicable agreement for further details.
--C1_CNT8[2] is SCAN_LED:U2|CNT8[2]
--operation mode is normal

C1_CNT8[2]_lut_out = C1_CNT8[2] $ (C1_CNT8[0] & C1_CNT8[1]);
C1_CNT8[2] = DFFEAS(C1_CNT8[2]_lut_out, CLK1, VCC, , , , , , );


--C1_CNT8[0] is SCAN_LED:U2|CNT8[0]
--operation mode is normal

C1_CNT8[0]_lut_out = !C1_CNT8[0];
C1_CNT8[0] = DFFEAS(C1_CNT8[0]_lut_out, CLK1, VCC, , , , , , );


--C1_CNT8[1] is SCAN_LED:U2|CNT8[1]
--operation mode is normal

C1_CNT8[1]_lut_out = C1_CNT8[0] $ C1_CNT8[1];
C1_CNT8[1] = DFFEAS(C1_CNT8[1]_lut_out, CLK1, VCC, , , , , , );


--C1L7 is SCAN_LED:U2|A[3]~801
--operation mode is normal

C1L7 = C1_CNT8[2] & (C1_CNT8[0] # C1_CNT8[1]);


--B1_C1[0] is CNT1000:U1|C1[0]
--operation mode is normal

B1_C1[0]_lut_out = !B1_C1[0] & (!B1_C1[1] & !B1_C1[2] # !B1_C1[3]);
B1_C1[0] = DFFEAS(B1_C1[0]_lut_out, CLK0, !RST, , EN, , , , );


--B1_C3[0] is CNT1000:U1|C3[0]
--operation mode is normal

B1_C3[0]_lut_out = A1L16 & (B1_C3[0] $ B1L27) # !A1L16 & !B1L6 & (B1_C3[0] $ B1L27);
B1_C3[0] = DFFEAS(B1_C3[0]_lut_out, CLK0, !RST, , EN, , , , );


--C1L1 is SCAN_LED:U2|A[0]~802
--operation mode is normal

C1L1 = C1_CNT8[1] & B1_C1[0] # !C1_CNT8[1] & (B1_C3[0]);


--B1_C2[0] is CNT1000:U1|C2[0]
--operation mode is normal

B1_C2[0]_lut_out = B1L3 & !B1L29 & (A1L15 # !B1L2);
B1_C2[0] = DFFEAS(B1_C2[0]_lut_out, CLK0, !RST, , EN, , , , );


--C1L2 is SCAN_LED:U2|A[0]~803
--operation mode is normal

C1L2 = C1L7 & (C1_CNT8[0] & C1L1 # !C1_CNT8[0] & (B1_C2[0]));


--B1_C1[1] is CNT1000:U1|C1[1]
--operation mode is normal

B1_C1[1]_lut_out = !B1_C1[3] & (B1_C1[0] $ B1_C1[1]);
B1_C1[1] = DFFEAS(B1_C1[1]_lut_out, CLK0, !RST, , EN, , , , );


--B1_C3[1] is CNT1000:U1|C3[1]
--operation mode is normal

B1_C3[1]_lut_out = !B1_C3[3] & (B1_C3[1] $ (B1_C3[0] & B1L27));
B1_C3[1] = DFFEAS(B1_C3[1]_lut_out, CLK0, !RST, , EN, , , , );


--C1L3 is SCAN_LED:U2|A[1]~804
--operation mode is normal

C1L3 = C1_CNT8[1] & B1_C1[1] # !C1_CNT8[1] & (B1_C3[1]);


--B1_C2[1] is CNT1000:U1|C2[1]
--operation mode is normal

B1_C2[1]_lut_out = !B1_C2[3] & (B1_C2[1] $ B1L1);
B1_C2[1] = DFFEAS(B1_C2[1]_lut_out, CLK0, !RST, , EN, , , , );


--C1L4 is SCAN_LED:U2|A[1]~805
--operation mode is normal

C1L4 = C1L7 & (C1_CNT8[0] & C1L3 # !C1_CNT8[0] & (B1_C2[1]));


--B1_C1[2] is CNT1000:U1|C1[2]
--operation mode is normal

B1_C1[2]_lut_out = !B1_C1[3] & (B1_C1[2] $ (B1_C1[0] & B1_C1[1]));
B1_C1[2] = DFFEAS(B1_C1[2]_lut_out, CLK0, !RST, , EN, , , , );


--B1_C3[2] is CNT1000:U1|C3[2]
--operation mode is normal

B1_C3[2]_lut_out = !B1_C3[3] & (B1_C3[2] $ (B1_C3[1] & B1L5));
B1_C3[2] = DFFEAS(B1_C3[2]_lut_out, CLK0, !RST, , EN, , , , );


--C1L5 is SCAN_LED:U2|A[2]~806
--operation mode is normal

C1L5 = C1_CNT8[1] & B1_C1[2] # !C1_CNT8[1] & (B1_C3[2]);


--B1_C2[2] is CNT1000:U1|C2[2]
--operation mode is normal

B1_C2[2]_lut_out = !B1_C2[3] & (B1_C2[2] $ (B1_C2[1] & B1L1));
B1_C2[2] = DFFEAS(B1_C2[2]_lut_out, CLK0, !RST, , EN, , , , );


--C1L6 is SCAN_LED:U2|A[2]~807
--operation mode is normal

C1L6 = C1L7 & (C1_CNT8[0] & C1L5 # !C1_CNT8[0] & (B1_C2[2]));


--B1_C1[3] is CNT1000:U1|C1[3]
--operation mode is normal

B1_C1[3]_lut_out = B1_C1[3] & !B1_C1[0] & !B1_C1[1] & !B1_C1[2] # !B1_C1[3] & B1_C1[0] & B1_C1[1] & B1_C1[2];
B1_C1[3] = DFFEAS(B1_C1[3]_lut_out, CLK0, !RST, , EN, , , , );


--B1_C3[3] is CNT1000:U1|C3[3]
--operation mode is normal

B1_C3[3]_lut_out = A1L16 & B1L6;
B1_C3[3] = DFFEAS(B1_C3[3]_lut_out, CLK0, !RST, , EN, , , , );


--C1L8 is SCAN_LED:U2|A[3]~808
--operation mode is normal

C1L8 = C1_CNT8[1] & B1_C1[3] # !C1_CNT8[1] & (B1_C3[3]);


--B1_C2[3] is CNT1000:U1|C2[3]
--operation mode is normal

B1_C2[3]_lut_out = B1L2 & A1L15 & (!B1L29);
B1_C2[3] = DFFEAS(B1_C2[3]_lut_out, CLK0, !RST, , EN, , , , );


--C1L9 is SCAN_LED:U2|A[3]~809
--operation mode is normal

C1L9 = C1L7 & (C1_CNT8[0] & C1L8 # !C1_CNT8[0] & (B1_C2[3]));


--C1L22 is SCAN_LED:U2|SG[0]~191
--operation mode is normal

C1L22 = C1L6 & !C1L4 & (C1L2 $ !C1L9) # !C1L6 & C1L2 & (C1L4 $ !C1L9);


--C1L23 is SCAN_LED:U2|SG[1]~192
--operation mode is normal

C1L23 = C1L4 & (C1L2 & (C1L9) # !C1L2 & C1L6) # !C1L4 & C1L6 & (C1L2 $ C1L9);


--C1L24 is SCAN_LED:U2|SG[2]~193
--operation mode is normal

C1L24 = C1L6 & C1L9 & (C1L4 # !C1L2) # !C1L6 & !C1L2 & C1L4 & !C1L9;


--C1L25 is SCAN_LED:U2|SG[3]~194
--operation mode is normal

C1L25 = C1L4 & (C1L2 & C1L6 # !C1L2 & !C1L6 & C1L9) # !C1L4 & !C1L9 & (C1L2 $ C1L6);


--C1L26 is SCAN_LED:U2|SG[4]~195
--operation mode is normal

C1L26 = C1L4 & C1L2 & (!C1L9) # !C1L4 & (C1L6 & (!C1L9) # !C1L6 & C1L2);


--C1L27 is SCAN_LED:U2|SG[5]~196
--operation mode is normal

C1L27 = C1L2 & (C1L9 $ (C1L4 # !C1L6)) # !C1L2 & C1L4 & !C1L6 & !C1L9;


--C1L28 is SCAN_LED:U2|SG[6]~197
--operation mode is normal

C1L28 = C1L2 & (C1L9 # C1L4 $ C1L6) # !C1L2 & (C1L4 # C1L6 $ C1L9);


--C1L10 is SCAN_LED:U2|BT[0]~115
--operation mode is normal

C1L10 = !C1_CNT8[0] & !C1_CNT8[1] & !C1_CNT8[2];


--C1L11 is SCAN_LED:U2|BT[0]~116
--operation mode is normal

C1L11 = C1_CNT8[0] & (!C1_CNT8[1] & !C1_CNT8[2]);


--C1L12 is SCAN_LED:U2|BT[0]~117
--operation mode is normal

C1L12 = C1_CNT8[1] & (!C1_CNT8[0] & !C1_CNT8[2]);


--C1L13 is SCAN_LED:U2|BT[0]~118
--operation mode is normal

C1L13 = C1_CNT8[0] & C1_CNT8[1] & (!C1_CNT8[2]);


--C1L14 is SCAN_LED:U2|BT[0]~119
--operation mode is normal

C1L14 = C1_CNT8[2] & (!C1_CNT8[0] & !C1_CNT8[1]);


--C1L15 is SCAN_LED:U2|BT[0]~120
--operation mode is normal

C1L15 = C1_CNT8[0] & C1_CNT8[2] & (!C1_CNT8[1]);


--C1L16 is SCAN_LED:U2|BT[0]~121
--operation mode is normal

C1L16 = C1_CNT8[1] & C1_CNT8[2] & (!C1_CNT8[0]);


--C1L17 is SCAN_LED:U2|BT[0]~122
--operation mode is normal

C1L17 = C1_CNT8[0] & C1_CNT8[1] & C1_CNT8[2];


--B1_COUT3 is CNT1000:U1|COUT3
--operation mode is normal

B1_COUT3_lut_out = A1L16 & B1L6 & (B1_C3[0] $ B1L27);
B1_COUT3 = DFFEAS(B1_COUT3_lut_out, CLK0, VCC, , B1L25, , , , );


--B1_COUT2 is CNT1000:U1|COUT2
--operation mode is normal

B1_COUT2_lut_out = B1L2 & A1L15 & B1L3;
B1_COUT2 = DFFEAS(B1_COUT2_lut_out, CLK0, VCC, , B1L25, , , , );


--B1_COUT1 is CNT1000:U1|COUT1
--operation mode is normal

B1_COUT1_lut_out = B1_C1[3] & !B1_C1[0] & !B1_C1[1] & !B1_C1[2];
B1_COUT1 = DFFEAS(B1_COUT1_lut_out, CLK0, VCC, , B1L25, , , , );


--B1L26 is CNT1000:U1|process0~361
--operation mode is normal

B1L26 = B1_C1[3] & (B1_C1[0] # B1_C1[1] # B1_C1[2]);


--B1L1 is CNT1000:U1|add~829
--operation mode is normal

B1L1 = B1_C2[0] & B1_COUT1 & B1L26;


--B1L2 is CNT1000:U1|add~830
--operation mode is normal

B1L2 = B1_C2[3] $ (B1_C2[1] & B1_C2[2] & B1L1);


--B1L3 is CNT1000:U1|add~831
--operation mode is normal

B1L3 = B1_C2[0] $ (B1_COUT1 & B1L26);


--A1L15 is rtl~113
--operation mode is normal

A1L15 = B1_C2[1] & B1_C2[2] & B1L1 # !B1_C2[1] & !B1_C2[2] & !B1L1;


--B1L27 is CNT1000:U1|process0~362
--operation mode is normal

B1L27 = B1_COUT2 & (B1L2 & (!A1L15) # !B1L2 & !B1L3 & A1L15);


--B1L4 is CNT1000:U1|add~832
--operation mode is normal

B1L4 = B1_C3[0] $ B1L27;


--A1L16 is rtl~114
--operation mode is normal

A1L16 = B1_C3[1] & B1_C3[0] & B1L27 & B1_C3[2] # !B1_C3[1] & !B1_C3[2] & (!B1L27 # !B1_C3[0]);


--B1L5 is CNT1000:U1|add~833
--operation mode is normal

B1L5 = B1_C3[0] & B1L27;


--B1L6 is CNT1000:U1|add~834
--operation mode is normal

B1L6 = B1_C3[3] $ (B1_C3[1] & B1_C3[2] & B1L5);


--B1L28 is CNT1000:U1|process0~363
--operation mode is normal

B1L28 = B1L26 & (B1L2 & (!A1L15) # !B1L2 & !B1L3 & A1L15);


--B1L29 is CNT1000:U1|process0~364
--operation mode is normal

B1L29 = B1L28 & (B1L6 & (!A1L16) # !B1L6 & !B1L4 & A1L16);


--B1L25 is CNT1000:U1|COUT3~1
--operation mode is normal

B1L25 = EN & (!RST);


--CLK1 is CLK1
--operation mode is input

CLK1 = INPUT();


--CLK0 is CLK0
--operation mode is input

CLK0 = INPUT();


--RST is RST
--operation mode is input

RST = INPUT();


--EN is EN
--operation mode is input

EN = INPUT();


--SG[0] is SG[0]
--operation mode is output

SG[0] = OUTPUT(!C1L22);


--SG[1] is SG[1]
--operation mode is output

SG[1] = OUTPUT(!C1L23);


--SG[2] is SG[2]
--operation mode is output

SG[2] = OUTPUT(!C1L24);


--SG[3] is SG[3]
--operation mode is output

SG[3] = OUTPUT(!C1L25);


--SG[4] is SG[4]
--operation mode is output

SG[4] = OUTPUT(!C1L26);


--SG[5] is SG[5]
--operation mode is output

SG[5] = OUTPUT(!C1L27);


--SG[6] is SG[6]
--operation mode is output

SG[6] = OUTPUT(C1L28);


--BT[0] is BT[0]
--operation mode is output

BT[0] = OUTPUT(C1L10);


--BT[1] is BT[1]
--operation mode is output

BT[1] = OUTPUT(C1L11);


--BT[2] is BT[2]
--operation mode is output

BT[2] = OUTPUT(C1L12);


--BT[3] is BT[3]
--operation mode is output

BT[3] = OUTPUT(C1L13);


--BT[4] is BT[4]
--operation mode is output

BT[4] = OUTPUT(C1L14);


--BT[5] is BT[5]
--operation mode is output

BT[5] = OUTPUT(C1L15);


--BT[6] is BT[6]
--operation mode is output

BT[6] = OUTPUT(C1L16);


--BT[7] is BT[7]
--operation mode is output

BT[7] = OUTPUT(C1L17);


--COUT is COUT
--operation mode is output

COUT = OUTPUT(B1_COUT3);