jishu1.fit

MAX+plus II 9.23 Baseline

-- MAX+plus II Compiler Fit File      
-- Version 9.23 3/19/99               
-- Compiled: 11/25/2006 15:50:58      

-- Copyright (C) 1988-1999 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "jishu1"
BEGIN

    DEVICE = "EPM7032LC44-6";

    "clk1"                         : INPUT_PIN  = 43     ;
    "co_sec"                       : OUTPUT_PIN = 34     ; -- LC23
    "ge10"                         : OUTPUT_PIN = 33     ; -- LC24
    "ge11"                         : OUTPUT_PIN = 26     ; -- LC30
    "ge12"                         : OUTPUT_PIN = 4      ; -- LC1
    "ge13"                         : OUTPUT_PIN = 24     ; -- LC32
    "shi10"                        : OUTPUT_PIN = 41     ; -- LC17
    "shi11"                        : OUTPUT_PIN = 40     ; -- LC18
    "shi12"                        : OUTPUT_PIN = 39     ; -- LC19
    "shi13"                        : OUTPUT_PIN = 38     ; -- LC20
    "|LPM_ADD_SUB:63|addcore:adder|addcore:adder0|result_node1" : LOCATION   = LC8    ; -- PIN 12
    "|LPM_ADD_SUB:63|addcore:adder|addcore:adder0|result_node2" : LOCATION   = LC12   ; -- PIN 17
    "|LPM_ADD_SUB:63|addcore:adder|addcore:adder0|result_node3" : LOCATION   = LC4    ; -- PIN 7
    "|LPM_ADD_SUB:87|addcore:adder|addcore:adder0|result_node1" : LOCATION   = LC29   ; -- PIN 27
    "|LPM_ADD_SUB:87|addcore:adder|addcore:adder0|result_node2" : LOCATION   = LC28   ; -- PIN 28
    "|LPM_ADD_SUB:87|addcore:adder|addcore:adder0|result_node3" : LOCATION   = LC21   ; -- PIN 37
    ":29"                          : LOCATION   = LC6    ; -- PIN 9  -- ge3~114
    ":30"                          : LOCATION   = LC7    ; -- PIN 11  -- ge2~114
    ":31"                          : LOCATION   = LC22   ; -- PIN 36  -- ge1~114
    ":32"                          : LOCATION   = LC5    ; -- PIN 8  -- ge0~114
    ":33"                          : LOCATION   = LC25   ; -- PIN 32  -- shi3
    ":34"                          : LOCATION   = LC26   ; -- PIN 31  -- shi2
    ":35"                          : LOCATION   = LC27   ; -- PIN 29  -- shi1~118
    ":36"                          : LOCATION   = LC31   ; -- PIN 25  -- shi0

END;

INTERNAL_INFO "jishu1"
BEGIN
	DEVICE = EPM7032LC44-6;
	LC32    : LORAX = "G58R0";
	LC1     : LORAX = "G9R0";
	LC30    : LORAX = "G56R0";
	LC24    : LORAX = "G33R0";
	LC20    : LORAX = "G16R0,PA1R0C1";
	LC19    : LORAX = "G15R0,PA3R0C1";
	LC18    : LORAX = "G14R0,PA5R0C1";
	LC17    : LORAX = "G13R0,PA7R0C1";
	LC23    : LORAX = "G32R0";
	LC5     : LORAX = "G26R0,PA11R0C0,PA11R0C1";
	LC4     : LORAX = "G12R0,PA0R0C0,PA0R0C1";
	LC6     : LORAX = "G27R0,PA10R0C0";
	LC7     : LORAX = "G28R0,PA12R0C0";
	LC22    : LORAX = "G31R0,PA14R0C0";
	LC8     : LORAX = "G29R0,PA9R0C1";
	LC12    : LORAX = "G37R0,PA26R0C1";
	LC21    : LORAX = "G30R0,PA16R0C1";
	LC25    : LORAX = "G38R0,PA18R0C1";
	LC26    : LORAX = "G39R0,PA21R0C1";
	LC27    : LORAX = "G40R0,PA19R0C1";
	LC31    : LORAX = "G57R0,PA28R0C1";
	LC29    : LORAX = "G55R0,PA27R0C1";
	LC28    : LORAX = "G41R0,PA20R0C1";
END;