control.fit

异步串口通信口在FPGA实现

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 09/02/2006 09:50:18      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "control"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "CLK"                          : INPUT_PIN  = 1      ;
    "RDFULL"                       : INPUT_PIN  = 42     ;
    "TDEMPTY"                      : INPUT_PIN  = 2      ;
    "CLK_OUT"                      : OUTPUT_PIN = 24     ;
    "RD"                           : OUTPUT_PIN = 66     ;
    "WR"                           : OUTPUT_PIN = 65     ;
    "|LPM_ADD_SUB:350|addcore:adder|:83" : LOCATION   = LC4_B11;
    "|LPM_ADD_SUB:350|addcore:adder|:91" : LOCATION   = LC8_B11;
    "|LPM_ADD_SUB:350|addcore:adder|:99" : LOCATION   = LC1_B4 ;
    "|LPM_ADD_SUB:350|addcore:adder|:103" : LOCATION   = LC3_B4 ;
    ":4"                           : LOCATION   = LC3_B19;
    ":6"                           : LOCATION   = LC5_B19;
    ":8"                           : LOCATION   = LC6_B8 ;
    ":12"                          : LOCATION   = LC4_B19;  -- S1~41
    ":13"                          : LOCATION   = LC2_B19;  -- S0
    ":14"                          : LOCATION   = LC4_B4 ;  -- COUNT9
    ":15"                          : LOCATION   = LC6_B4 ;  -- COUNT8
    ":16"                          : LOCATION   = LC7_B4 ;  -- COUNT7
    ":17"                          : LOCATION   = LC2_B4 ;  -- COUNT6
    ":18"                          : LOCATION   = LC2_B11;  -- COUNT5
    ":19"                          : LOCATION   = LC6_B11;  -- COUNT4
    ":20"                          : LOCATION   = LC5_B11;  -- COUNT3
    ":21"                          : LOCATION   = LC7_B11;  -- COUNT2
    ":22"                          : LOCATION   = LC5_B8 ;  -- COUNT1
    ":23"                          : LOCATION   = LC3_B11;  -- COUNT0
    ":134"                         : LOCATION   = LC1_B19;
    ":273"                         : LOCATION   = LC8_B4 ;
    ":288"                         : LOCATION   = LC4_B8 ;
    "~290~1"                       : LOCATION   = LC1_B11;
    "~578~1"                       : LOCATION   = LC5_B4 ;

END;

INTERNAL_INFO "control"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD4P1   : LORAX = "1:FB4->LC3_B19,->LC5_B19,->LC6_B8,->LC4_B19,->LC2_B19,->LC4_B4,->LC6_B4,->LC7_B4,->LC2_B4,->LC2_B11,->LC6_B11,->LC5_B11,->LC7_B11,->LC5_B8,->LC3_B11|";
    LC8_B11 : LORAX = "1:MSW7R1C10,HHL25R1,PA3R1C3->LC1_B4,->LC2_B4|";
    OD3P42  : LORAX = "1:FB3|2:FH3R1,PA5R1C18->LC3_B19,->LC1_B19||";
    OD1P2   : LORAX = "1:FB1|2:FH1R1,PA20R1C18->LC1_B19||";
    LC3_B19 : LORAX = "1:MSW2R1C18,HHR3R1->OH2R1P66|";
    LC5_B19 : LORAX = "1:MSW4R1C18,HHR41R1->OH4R1P65|";
    LC6_B8  : LORAX = "1:MSW5R1C7,HHL28R1->OH13R1P24|";
    LC2_B4  : LORAX = "1:MSW1R1C3,HHL12R1,PA3R1C7->LC4_B8|";
    LC2_B11 : LORAX = "1:MSW1R1C10,HHL5R1,PA17R1C3->LC1_B4,->LC2_B4|";
    LC5_B8  : LORAX = "1:MSW4R1C7,HHL36R1,PA20R1C10->LC4_B11,->LC7_B11|";
    LC3_B11 : LORAX = "1:MSW2R1C10,HHL0R1,PA1R1C7->LC6_B8,->LC5_B8,->LC4_B8|";
    LC8_B4  : LORAX = "1:|2:MSW4R1C2,HHL43R1,PA6R1C7->LC5_B8|,2:MSW7R1C3,HHL27R1,PA8R1C10->LC2_B11,->LC6_B11,->LC5_B11,->LC7_B11,->LC3_B11||";
    LC4_B8  : LORAX = "1:MSW3R1C7,HHL13R1,PA2R1C3->LC8_B4|";
    LC1_B11 : LORAX = "1:MSW0R1C10,HHL18R1,PA18R1C7->LC6_B8,->LC4_B8|";
    LC5_B4  : LORAX = "1:MSW4R1C3,HHL38R1,PA11R1C7->LC6_B8|";
	LC4_B11 : LORAX2 = "X, LC7_B11, LC5_B8, LC3_B11";
	LC8_B11 : LORAX2 = "X, LC6_B11, LC5_B11, LC4_B11";
	LC1_B4  : LORAX2 = "X, LC2_B4, LC2_B11, LC8_B11";
	LC3_B4  : LORAX2 = "X, X, LC7_B4, LC1_B4";
	LC3_B19 : LORAX2 = "LC2_B19, LC4_B19, OD3P42, LC3_B19";
	LC5_B19 : LORAX2 = "LC2_B19, LC4_B19, LC1_B19, LC5_B19";
	LC6_B8  : LORAX2 = "LC5_B4, LC1_B11, LC5_B8, LC3_B11";
	LC4_B19 : LORAX2 = "X, LC4_B19, LC2_B19, LC1_B19";
	LC2_B19 : LORAX2 = "X, X, LC2_B19, LC1_B19";
	LC4_B4  : LORAX2 = "LC4_B4, LC6_B4, LC8_B4, LC3_B4";
	LC6_B4  : LORAX2 = "LC6_B4, LC7_B4, LC8_B4, LC1_B4";
	LC7_B4  : LORAX2 = "X, LC7_B4, LC8_B4, LC1_B4";
	LC2_B4  : LORAX2 = "LC2_B4, LC8_B4, LC2_B11, LC8_B11";
	LC2_B11 : LORAX2 = "X, LC8_B4, LC2_B11, LC8_B11";
	LC6_B11 : LORAX2 = "LC8_B4, LC6_B11, LC5_B11, LC4_B11";
	LC5_B11 : LORAX2 = "X, LC8_B4, LC5_B11, LC4_B11";
	LC7_B11 : LORAX2 = "LC8_B4, LC7_B11, LC5_B8, LC3_B11";
	LC5_B8  : LORAX2 = "X, LC8_B4, LC5_B8, LC3_B11";
	LC3_B11 : LORAX2 = "X, X, LC8_B4, LC3_B11";
	LC1_B19 : LORAX2 = "X, X, OD1P2, OD3P42";
	LC8_B4  : LORAX2 = "LC4_B4, LC6_B4, LC7_B4, LC4_B8";
	LC4_B8  : LORAX2 = "LC2_B4, LC1_B11, LC5_B8, LC3_B11";
	LC1_B11 : LORAX2 = "LC2_B11, LC5_B11, LC6_B11, LC7_B11";
	LC5_B4  : LORAX2 = "LC4_B4, LC6_B4, LC7_B4, LC2_B4";
END;