_impact.log

用FPGA模拟VGA时序、模拟PS/2总线的键盘接口VHDL源代码

iMPACT Version: G.35
iMPACT log file Started on 2006/05/11 12:23:52
ERROR:iMPACT:1705 - Command Line Error: incorrect format of preference.
// *** BATCH CMD : setPreference -pref UserLevel:NOVICE
// *** BATCH CMD : setPreference -pref MessageLevel:DETAILED
// *** BATCH CMD : setPreference -pref ConcurrentMode:FALSE
// *** BATCH CMD : setPreference -pref UseHighz:FALSE
// *** BATCH CMD : setPreference -pref ConfigOnFailure:STOP
// *** BATCH CMD : setPreference -pref StartupCLock:AUTO_CORRECTION
// *** BATCH CMD : setPreference -pref AutoSignature:FALSE
// *** BATCH CMD : setPreference -pref KeepSVF:FALSE
// *** BATCH CMD : setPreference -pref svfUseTime:FALSE
// *** BATCH CMD : setPreference -pref UserLevel:NOVICE
// *** BATCH CMD : setPreference -pref MessageLevel:DETAILED
// *** BATCH CMD : setPreference -pref ConcurrentMode:FALSE
// *** BATCH CMD : setPreference -pref UseHighz:FALSE
// *** BATCH CMD : setPreference -pref ConfigOnFailure:STOP
// *** BATCH CMD : setPreference -pref StartupCLock:AUTO_CORRECTION
// *** BATCH CMD : setPreference -pref AutoSignature:FALSE
// *** BATCH CMD : setPreference -pref KeepSVF:FALSE
// *** BATCH CMD : setPreference -pref svfUseTime:FALSE
*****   Closing iMPACT program.   *****
** BATCH CMD : setMode -bs
GUI --- Auto connect to cable...
// *** BATCH CMD : setCable -port auto
AutoDetecting cable. Please wait.
CB_PROGRESS_START - Starting Operation.
Connecting to cable (USB Port).
Cable connection failed.
Connecting to cable (Parallel Port - LPT1).
Checking cable driver.
 Driver windrvr6.sys version = 6.0.3.0. LPT base address = 0378h.
 ECP base address = 0778h.
Cable connection established.
CB_PROGRESS_END - End Operation.
Elapsed time =      2 sec.
// *** BATCH CMD : Identify
PROGRESS_START - Starting Operation.
Identifying chain contents ....'1': : Manufacturer's ID =Xilinx xcf02s, Version : 0
INFO:iMPACT:1777 - 
Reading E:/Xilinx/xcf/data/xcf02s.bsd...
Reading E:/Xilinx/xcf/data/xcf02s.bsd...
INFO:iMPACT:501 - '1': Added Device xcf02s successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'2': : Manufacturer's ID =Xilinx xc3s400, Version : 0
INFO:iMPACT:1777 - 
Reading E:/Xilinx/spartan3/data/xc3s400.bsd...
Reading E:/Xilinx/spartan3/data/xc3s400.bsd...
INFO:iMPACT:501 - '1': Added Device xc3s400 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
done.
PROGRESS_END - End Operation.
Elapsed time =      2 sec.
// *** BATCH CMD : setAttribute -position 1 -attr configFileName -value "G:\资料\Spartan-3\S3Demo\s3demo.bit"
'1': Loading file 'G:\资料\Spartan-3\S3Demo\s3demo.bit' ...
done.
WARNING:iMPACT:1049 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
but the original bitstream file remains unchanged.
INFO:iMPACT:501 - '1': Added Device xc3s400 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
// *** BATCH CMD : Program -p 1 -v 
PROGRESS_START - Starting Operation.
Validating chain...
Boundary-scan chain validated successfully.
ERROR:Bitstream:2 - The input file "G:\资料\Spartan-3\S3Demo\s3demo.msk" does not exist.  Please check that the specified location is correct and that the bitstream was succesfully created.
ERROR:iMPACT:123 - Mask file G:\资料\Spartan-3\S3Demo\s3demo.msk is invalid.
PROGRESS_END - End Operation.
Elapsed time =      2 sec.
// *** BATCH CMD : Verify -p 1 
PROGRESS_START - Starting Operation.
Validating chain...
Boundary-scan chain validated successfully.
ERROR:Bitstream:2 - The input file "G:\资料\Spartan-3\S3Demo\s3demo.msk" does not exist.  Please check that the specified location is correct and that the bitstream was succesfully created.
ERROR:iMPACT:123 - Mask file G:\资料\Spartan-3\S3Demo\s3demo.msk is invalid.
PROGRESS_END - End Operation.
Elapsed time =      3 sec.
xc18v02_pc44
xc18v02_vq44
xc18v04_pc44
xc18v04_vq44
xcf02s_vo20
xcf04s_vo20
xcf08p_fs48
xcf08p_vo48
xcf16p_fs48
xcf16p_vo48
xcf32p_fs48
xcf32p_vo48
// *** BATCH CMD : setAttribute -position 2 -attr devicePartName -value "xcf02s"
// *** BATCH CMD : setAttribute -position 2 -attr configFileName -value "G:\资料\Spartan-3\S3Demo\S3demo.mcs"
'2': Loading file 'G:\资料\Spartan-3\S3Demo\S3demo.mcs' ...
done.
// *** BATCH CMD : Program -p 2 -e -v 
PROGRESS_START - Starting Operation.
Validating chain...
Boundary-scan chain validated successfully.
'2': Putting device in ISP mode...done.
'2': Erasing device...done.
'2': Erasure completed successfully.
'2': Putting device in ISP mode...done.
'2': Programming device...done.
'2': Putting device in ISP mode...done.
'2': Putting device in ISP mode...done.
'2': Verifying device...done.
'2': Verification completed successfully.
'2': Calculated checksum matches expected checksum, 000c3f08a
'2': Putting device in ISP mode...done.
'2': Setting user-programmable bits...
done.
'2': Putting device in ISP mode...done.
'2': Programming completed successfully.
PROGRESS_END - End Operation.
Elapsed time =     27 sec.
// *** BATCH CMD : Program -p 2 -e -v 
PROGRESS_START - Starting Operation.
Validating chain...
Boundary-scan chain validated successfully.
'2': Putting device in ISP mode...done.
'2': Erasing device...done.
'2': Erasure completed successfully.
'2': Putting device in ISP mode...done.
'2': Programming device...done.
'2': Putting device in ISP mode...done.
'2': Putting device in ISP mode...done.
'2': Verifying device...done.
'2': Verification completed successfully.
'2': Calculated checksum matches expected checksum, 000c3f08a
'2': Putting device in ISP mode...done.
'2': Setting user-programmable bits...
done.
'2': Putting device in ISP mode...done.
'2': Programming completed successfully.
PROGRESS_END - End Operation.
Elapsed time =     27 sec.
// *** BATCH CMD : Program -p 2 -e -v 
PROGRESS_START - Starting Operation.
Validating chain...
Boundary-scan chain validated successfully.
'2': Putting device in ISP mode...done.
'2': Erasing device...done.
'2': Erasure completed successfully.
'2': Putting device in ISP mode...done.
'2': Programming device...done.
'2': Putting device in ISP mode...done.
'2': Putting device in ISP mode...done.
'2': Verifying device...done.
'2': Verification completed successfully.
'2': Calculated checksum matches expected checksum, 000c3f08a
'2': Putting device in ISP mode...done.
'2': Setting user-programmable bits...
done.
'2': Putting device in ISP mode...done.
'2': Programming completed successfully.
PROGRESS_END - End Operation.
Elapsed time =     27 sec.
// *** BATCH CMD : Program -p 2 -e -v 
PROGRESS_START - Starting Operation.
Validating chain...
Boundary-scan chain validated successfully.
'2': Putting device in ISP mode...done.
'2': Erasing device...done.
'2': Erasure completed successfully.
'2': Putting device in ISP mode...done.
'2': Programming device...done.
'2': Putting device in ISP mode...done.
'2': Putting device in ISP mode...done.
'2': Verifying device...done.
'2': Verification completed successfully.
'2': Calculated checksum matches expected checksum, 000c3f08a
'2': Putting device in ISP mode...done.
'2': Setting user-programmable bits...
done.
'2': Putting device in ISP mode...done.
'2': Programming completed successfully.
PROGRESS_END - End Operation.
Elapsed time =     28 sec.
Cable is not connected.
Cable is not connected.
*****   Closing iMPACT program.   *****
----------------------------------------------------------------------
----------------------------------------------------------------------