_impact.log

接VGA 显示器和鼠标

INFO:iMPACT:1206 - Instruction Capture = '11111111111111'
INFO:iMPACT:1207 - Expected    Capture = 'XXXX01000XX001'
ERROR:iMPACT:1210 - '2':Boundary-scan chain test failed at bit position '1'.
	A problem may exist in the hardware configuration.
	Check that the cable, scan chain, and power connections are intact,
	that the specified scan chain configuration matches the actual hardware, and
	that the power supply is adequate and delivering the correct voltage.
	A problem may exist in the hardware configuration.
	Check that the cable, scan chain, and power connections are intact,
	that the specified scan chain configuration matches the actual hardware, and
	that the power supply is adequate and delivering the correct voltage.
	Check that the cable, scan chain, and power connections are intact,
	that the specified scan chain configuration matches the actual hardware, and
	that the power supply is adequate and delivering the correct voltage.
	that the specified scan chain configuration matches the actual hardware, and
	that the power supply is adequate and delivering the correct voltage.
	that the power supply is adequate and delivering the correct voltage.
PROGRESS_END - End Operation.
Elapsed time =      5 sec.
// *** BATCH CMD : setAttribute -position 1 -attr configFileName -value "E:\work\coreban\subseg\clock.bit"
'1': Loading file 'E:\work\coreban\subseg\clock.bit' ...
done.
WARNING:iMPACT:1049 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
but the original bitstream file remains unchanged.
INFO:iMPACT:501 - '1': Added Device xc3s200 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
// *** BATCH CMD : Program -p 1 
PROGRESS_START - Starting Operation.
Validating chain...
INFO:iMPACT:1209 - Testing for '0' at position 12.The Instruction capture of the device 2 does not match expected capture.
INFO:iMPACT:1206 - Instruction Capture = '11111111111111'
INFO:iMPACT:1207 - Expected    Capture = 'XXXX01000XX001'
ERROR:iMPACT:1210 - '2':Boundary-scan chain test failed at bit position '1'.
	A problem may exist in the hardware configuration.
	Check that the cable, scan chain, and power connections are intact,
	that the specified scan chain configuration matches the actual hardware, and
	that the power supply is adequate and delivering the correct voltage.
	A problem may exist in the hardware configuration.
	Check that the cable, scan chain, and power connections are intact,
	that the specified scan chain configuration matches the actual hardware, and
	that the power supply is adequate and delivering the correct voltage.
	Check that the cable, scan chain, and power connections are intact,
	that the specified scan chain configuration matches the actual hardware, and
	that the power supply is adequate and delivering the correct voltage.
	that the specified scan chain configuration matches the actual hardware, and
	that the power supply is adequate and delivering the correct voltage.
	that the power supply is adequate and delivering the correct voltage.
PROGRESS_END - End Operation.
Elapsed time =      1 sec.
// *** BATCH CMD : Identify
PROGRESS_START - Starting Operation.
----------------------------------------------------------------------
----------------------------------------------------------------------
Identifying chain contents ....done.
ERROR:iMPACT:585 - A problem may exist in the hardware configuration.
	Check that the cable, scan chain, and power connections are intact,
	that the specified scan chain configuration matches the actual hardware, and
	 that the power supply is adequate and delivering the correct voltage.
	Check that the cable, scan chain, and power connections are intact,
	that the specified scan chain configuration matches the actual hardware, and
	 that the power supply is adequate and delivering the correct voltage.
	that the specified scan chain configuration matches the actual hardware, and
	 that the power supply is adequate and delivering the correct voltage.
	 that the power supply is adequate and delivering the correct voltage.
PROGRESS_END - End Operation.
Elapsed time =      1 sec.
// *** BATCH CMD : Identify
PROGRESS_START - Starting Operation.
Identifying chain contents ....'1': : Manufacturer's ID =Xilinx xcf02s, Version : 0
INFO:iMPACT:1777 - 
Reading D:/Xilinx/xcf/data/xcf02s.bsd...
Reading D:/Xilinx/xcf/data/xcf02s.bsd...
INFO:iMPACT:501 - '1': Added Device xcf02s successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'2': : Manufacturer's ID =Xilinx xc3s200, Version : 0
INFO:iMPACT:1777 - 
Reading D:/Xilinx/spartan3/data/xc3s200.bsd...
Reading D:/Xilinx/spartan3/data/xc3s200.bsd...
INFO:iMPACT:501 - '1': Added Device xc3s200 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
done.
PROGRESS_END - End Operation.
Elapsed time =      0 sec.
// *** BATCH CMD : setAttribute -position 1 -attr configFileName -value "E:\work\coreban\subseg\clock.bit"
'1': Loading file 'E:\work\coreban\subseg\clock.bit' ...
done.
WARNING:iMPACT:1049 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
but the original bitstream file remains unchanged.
INFO:iMPACT:501 - '1': Added Device xc3s200 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
// *** BATCH CMD : Program -p 1 
PROGRESS_START - Starting Operation.
Validating chain...
Boundary-scan chain validated successfully.
'1':Programming  device...done.
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:580 - '1':Checking done pin ....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time =      5 sec.
// *** BATCH CMD : setAttribute -position 1 -attr configFileName -value "E:\work\coreban\submouse\top.bit"
'1': Loading file 'E:\work\coreban\submouse\top.bit' ...
done.
WARNING:iMPACT:1049 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
but the original bitstream file remains unchanged.
INFO:iMPACT:501 - '1': Added Device xc3s200 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
// *** BATCH CMD : Program -p 1 
PROGRESS_START - Starting Operation.
Validating chain...
Boundary-scan chain validated successfully.
'1':Programming  device...done.
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:580 - '1':Checking done pin ....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time =      5 sec.
*****   Closing iMPACT program.   *****
----------------------------------------------------------------------
----------------------------------------------------------------------