testdlg.h

用vc写的测试gps信号跟踪和俘获程序正确性和速度的程序

// TestDlg.h : header file
//

#if !defined(AFX_TESTDLG_H__4D455F7B_E393_446A_B2CE_34D4E814F67A__INCLUDED_)
#define AFX_TESTDLG_H__4D455F7B_E393_446A_B2CE_34D4E814F67A__INCLUDED_

#if _MSC_VER > 1000
#pragma once
#endif // _MSC_VER > 1000

/////////////////////////////////////////////////////////////////////////////
// CTestDlg dialog
typedef struct __usb_Dev_Descriptor__ {
    UCHAR bLength;
    UCHAR bDescriptorType;
    USHORT bcdUSB;
    UCHAR bDeviceClass;
    UCHAR bDeviceSubClass;
    UCHAR bDeviceProtocol;
    UCHAR bMaxPacketSize0;
    USHORT idVendor;
    USHORT idProduct;
    USHORT bcdDevice;
    UCHAR iManufacturer;
    UCHAR iProduct;
    UCHAR iSerialNumber;
    UCHAR bNumConfigurations;
} Usb_Device_Descriptor, *pUsb_Device_Descriptor;

typedef struct __usb_Config_Descriptor__ {
    UCHAR bLength;
    UCHAR bDescriptorType;
    USHORT wTotalLength;
    UCHAR bNumInterfaces;
    UCHAR bConfigurationValue;
    UCHAR iConfiguration;
    UCHAR bmAttributes;
    UCHAR MaxPower;
} Usb_Configuration_Descriptor, *pUsb_Configuration_Descriptor;

typedef struct _USB_INTERFACE_DESCRIPTOR {
    UCHAR bLength;
    UCHAR bDescriptorType;
    UCHAR bInterfaceNumber;
    UCHAR bAlternateSetting;
    UCHAR bNumEndpoints;
    UCHAR bInterfaceClass;
    UCHAR bInterfaceSubClass;
    UCHAR bInterfaceProtocol;
    UCHAR iInterface;
} Usb_Interface_Descriptor, *pUsb_Interface_Descriptor;

typedef struct _USB_ENDPOINT_DESCRIPTOR {
    UCHAR bLength;
    UCHAR bDescriptorType;
    UCHAR bEndpointAddress;
    UCHAR bmAttributes;
    USHORT wMaxPacketSize;
    UCHAR bInterval;
} Usb_Endpoint_Descriptor, *pUsb_Endpoint_Descriptor;



typedef PVOID USBD_PIPE_HANDLE;
typedef PVOID USBD_CONFIGURATION_HANDLE;
typedef PVOID USBD_INTERFACE_HANDLE;

typedef enum _USBD_PIPE_TYPE {
    UsbdPipeTypeControl,
    UsbdPipeTypeIsochronous,
    UsbdPipeTypeBulk,
    UsbdPipeTypeInterrupt
} USBD_PIPE_TYPE;
typedef struct _USBD_PIPE_INFORMATION {
    //
    // OUTPUT
    // These fields are filled in by USBD
    //
    USHORT MaximumPacketSize;  // Maximum packet size for this pipe
    UCHAR EndpointAddress;     // 8 bit USB endpoint address (includes direction)
                               // taken from endpoint descriptor
    UCHAR Interval;            // Polling interval in ms if interrupt pipe 
    
    USBD_PIPE_TYPE PipeType;   // PipeType identifies type of transfer valid for this pipe
    USBD_PIPE_HANDLE PipeHandle;
    
    //
    // INPUT
    // These fields are filled in by the client driver
    //
    ULONG MaximumTransferSize; // Maximum size for a single request
                               // in bytes.
    ULONG PipeFlags;                                   
} USBD_PIPE_INFORMATION, *PUSBD_PIPE_INFORMATION;


typedef struct _USBD_INTERFACE_INFORMATION {
    USHORT Length;       // Length of this structure, including
                         // all pipe information structures that
                         // follow.
    //
    // INPUT
    //
    // Interface number and Alternate setting this
    // structure is associated with
    //
    UCHAR InterfaceNumber;
    UCHAR AlternateSetting;
    
    //
    // OUTPUT
    // These fields are filled in by USBD
    //
    UCHAR Class;
    UCHAR SubClass;
    UCHAR Protocol;
    UCHAR Reserved;
    
    USBD_INTERFACE_HANDLE InterfaceHandle;
    ULONG NumberOfPipes; 

    //
    // INPUT/OUPUT
    // see PIPE_INFORMATION
    USBD_PIPE_INFORMATION Pipes[0];

} USBD_INTERFACE_INFORMATION, *PUSBD_INTERFACE_INFORMATION;


//typedef LONG USBD_STATUS;

//收发线程参数
typedef struct _THREAD_CONTROL
{
   HANDLE hThread;

   HANDLE hDevice;

   DWORD Ioctl;
   PVOID InBuffer;
   DWORD InBufferSize;
   PVOID OutBuffer;
   DWORD OutBufferSize;
   DWORD BytesReturned;

   HANDLE completionEvent;
   BOOL  status;
} THREAD_CONTROL, *PTHREAD_CONTROL;
//测试线程参数
class CTestDlg ;
struct CThreadParam {
	HANDLE hThread;
	CTestDlg* testDlg;
	BOOLEAN bInThread;
	BOOLEAN bUpdate;
/*		ISO_TRANSFER_CONTROL IsoControl;
		unsigned char * pcIoBuffer;*/
	
};

BOOL bOpenDriver (HANDLE * phDeviceHandle, PCHAR devname);



class CTestDlg : public CDialog
{
// Construction
public:
	CTestDlg(CWnd* pParent = NULL);	// standard constructor


//	BOOL gStopTest;
	CThreadParam m_BulkTest;//线程参数

// Dialog Data
	//{{AFX_DATA(CTestDlg)
	enum { IDD = IDD_TEST_DIALOG };
	CButton	m_btnStop;
	CButton	m_btnStart;
	CString	m_strName;
	CString	m_strOutput;
	UINT	m_nSize;
	UINT	m_nTestPass;
	UINT	m_nError;
	//}}AFX_DATA

	// ClassWizard generated virtual function overrides
	//{{AFX_VIRTUAL(CTestDlg)
	protected:
	virtual void DoDataExchange(CDataExchange* pDX);	// DDX/DDV support
	//}}AFX_VIRTUAL

// Implementation
protected:
	HICON m_hIcon;

	// Generated message map functions
	//{{AFX_MSG(CTestDlg)
	virtual BOOL OnInitDialog();
	afx_msg void OnPaint();
	afx_msg HCURSOR OnQueryDragIcon();
	afx_msg void OnBtnlist();
	afx_msg void OnBtnclear();
	afx_msg void OnBtnstop();
	afx_msg void OnBtnstart();
	afx_msg void OnTimer(UINT nIDEvent);
	afx_msg void OnBtnspeed();
	//}}AFX_MSG
	DECLARE_MESSAGE_MAP()
};

//{{AFX_INSERT_LOCATION}}
// Microsoft Visual C++ will insert additional declarations immediately before the previous line.

#endif // !defined(AFX_TESTDLG_H__4D455F7B_E393_446A_B2CE_34D4E814F67A__INCLUDED_)