keyboard.vhd

BurchED B5-X300 Spartan2e using XC2S300e device Top level file for 6809 compatible system on a chi

---------------------------------------------------------------------------------------
--
-- Author: John Kent
-- Date  : April 2, 2004
-- Interface to John Clayton's PS2 keyboard
--
---------------------------------------------------------------------------------------

library ieee;
   use ieee.std_logic_1164.all;
   use IEEE.STD_LOGIC_ARITH.ALL;
   use IEEE.STD_LOGIC_UNSIGNED.ALL;
   use ieee.numeric_std.all;


entity keyboard is
  port(
  clk             : in    std_logic;
  rst             : in    std_logic;
  cs              : in    std_logic;
  rw              : in    std_logic;
  addr            : in    std_logic;
  data_in         : in    std_logic_vector(7 downto 0);
  data_out        : out   std_logic_vector(7 downto 0);
  irq             : out   std_logic;
  kbd_clk         : inout std_logic;
  kbd_data        : inout std_logic
);
end keyboard;

architecture my_keyboard of keyboard is

signal kbd_stat       : std_logic_vector(7 downto 0);
signal kbd_ctrl       : std_logic_vector(7 downto 0);
signal kbd_scan_code  : std_logic_vector(7 downto 0);
signal kbd_ascii_code : std_logic_vector(7 downto 0);
signal kbd_tx_data    : std_logic_vector(7 downto 0);
signal kbd_tx_reg     : std_logic_vector(7 downto 0);
signal kbd_read       : std_logic;
signal kbd_write      : std_logic;
signal kbd_write_ack  : std_logic;

component ps2_keyboard_interface
  port(
  clk             : in    std_logic;
  reset           : in    std_logic;
  ps2_clk         : inout std_logic;
  ps2_data        : inout std_logic;
  rx_extended     : out   std_logic;
  rx_released     : out   std_logic;
  rx_shift_key_on : out   std_logic;
--  rx_scan_code    : out   std_logic_vector(7 downto 0);
  rx_ascii        : out   std_logic_vector(7 downto 0);
  rx_data_ready   : out   std_logic;       -- rx_read_o
  rx_read         : in    std_logic;       -- rx_read_ack_i
  tx_data         : in    std_logic_vector(7 downto 0);
  tx_write        : in    std_logic;
  tx_write_ack    : out   std_logic;
  tx_error_no_keyboard_ack	: out  std_logic
  );
end component;

begin

my_ps2_keyboard_interface : ps2_keyboard_interface
  port map(
  clk             => clk,
  reset           => rst,
  ps2_clk         => kbd_clk,
  ps2_data        => kbd_data,
  rx_extended     => kbd_stat(2),
  rx_released     => kbd_stat(3),
  rx_shift_key_on => kbd_stat(4),
--  rx_scan_code    => kbd_scan_code,
  rx_ascii        => kbd_ascii_code,
  rx_data_ready   => kbd_stat(0),
  rx_read         => kbd_read,
  tx_data         => kbd_tx_data,
  tx_write        => kbd_write,
  tx_write_ack    => kbd_write_ack,
  tx_error_no_keyboard_ack	=> kbd_stat(5)
  );

keyboard_strobe : process( clk, rst, cs, rw, kbd_stat  )
begin
	if( rst = '1' ) then
		kbd_read <= '0';
	elsif( clk'event and clk='0' ) then
		if( cs='1' and rw='1' and addr='1' ) then
			kbd_read <= '1';
		elsif( kbd_stat(0)='1' ) then
			kbd_read <= '0';
		else
			kbd_read <= kbd_read;
		end if;
	end if;
end process;

--
-- read keyboard registers
--
keyboard_read : process( clk, rst, cs, rw, addr )
begin
	if( addr = '1' ) then
		data_out <= kbd_ascii_code;
	else
		data_out <= kbd_stat;
   end if; 
end process;

--
-- Write to keyboard register
--
keyboard_write : process( clk, rst, cs, rw, addr, data_in, kbd_tx_reg,
									 kbd_write, kbd_write_ack )
begin
	if(rst = '1' ) then
	   kbd_ctrl   <= "00000000";
	   kbd_tx_reg <= "00000000";
		kbd_write  <= '0';
	elsif( clk'event and clk='0' ) then
		if( cs='1' and rw='0' ) then
			if( addr='1' ) then
				kbd_tx_reg  <= data_in;
				kbd_ctrl    <= kbd_ctrl;
				kbd_write   <= '1';
			else
				kbd_tx_reg  <= kbd_tx_reg;
				kbd_ctrl    <= data_in;
				kbd_write   <= kbd_write;
			end if;
		elsif( kbd_write_ack='1' ) then
			kbd_write <= '0';
		else
			kbd_write <= kbd_write;
		end if;
		kbd_stat(1) <= not kbd_write;
	end if;
end process;

keyboard_interrupt : process( kbd_ctrl, kbd_stat )
begin
	kbd_stat(6)	<= kbd_ctrl(6);
	kbd_stat(7) <= kbd_ctrl(7) and kbd_stat(0);
	irq         <= kbd_stat(7);
end process;
end my_keyboard;