fs_test.fit

一个基于FPGA的串口程序,已经经过验证,对用FPGA做串口的朋友提供参考和借鉴!

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 04/30/2004 11:56:52      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "fs_test"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "fs_clock"                     : INPUT_PIN  = 1      ;
    "Fs_load"                      : INPUT_PIN  = 2      ;
    "Fs_pi0"                       : INPUT_PIN  = 42     ;
    "Fs_pi1"                       : INPUT_PIN  = 44     ;
    "Fs_pi2"                       : INPUT_PIN  = 84     ;
    "Fs_pi3"                       : INPUT_PIN  = 43     ;
    "Fs_pi4"                       : INPUT_PIN  = 7      ;
    "Fs_pi5"                       : INPUT_PIN  = 47     ;
    "Fs_pi6"                       : INPUT_PIN  = 28     ;
    "Fs_pi7"                       : INPUT_PIN  = 78     ;
    "fs_clk"                       : OUTPUT_PIN = 64     ;
    "fs_dao"                       : OUTPUT_PIN = 62     ;
    "fs_ld"                        : OUTPUT_PIN = 59     ;
    "Fs_po0"                       : OUTPUT_PIN = 30     ;
    "Fs_po1"                       : OUTPUT_PIN = 35     ;
    "Fs_po2"                       : OUTPUT_PIN = 60     ;
    "Fs_po3"                       : OUTPUT_PIN = 17     ;
    "Fs_po4"                       : OUTPUT_PIN = 29     ;
    "Fs_po5"                       : OUTPUT_PIN = 5      ;
    "Fs_po6"                       : OUTPUT_PIN = 27     ;
    "Fs_po7"                       : OUTPUT_PIN = 61     ;
    "Fs_po8"                       : OUTPUT_PIN = 49     ;
    "Fs_po9"                       : OUTPUT_PIN = 58     ;
    "Fs_Txd"                       : OUTPUT_PIN = 25     ;
    "fs_1p"                        : OUTPUT_PIN = 50     ;
    "fs_clk~1"                     : LOCATION   = LC7_B13;
    "|fs_cnt:2|cnt0"               : LOCATION   = LC1_C16;
    "|fs_cnt:2|cnt1"               : LOCATION   = LC3_C16;
    "|fs_cnt:2|cnt2"               : LOCATION   = LC5_C16;
    "|fs_cnt:2|cnt3"               : LOCATION   = LC7_C16;
    "|fs_cnt:2|cnt4"               : LOCATION   = LC6_C17;
    "|fs_cnt:2|:50"                : LOCATION   = LC3_C17;
    "|fs_cnt:2|:57"                : LOCATION   = LC8_C16;
    "|fs_cnt:2|:95"                : LOCATION   = LC1_C17;
    "|fs_cnt:2|~95~1"              : LOCATION   = LC4_C17;
    "|fs_sft:1|sft_reg0"           : LOCATION   = LC7_C5 ;
    "|fs_sft:1|sft_reg0~1"         : LOCATION   = LC8_C5 ;
    "|fs_sft:1|sft_reg1"           : LOCATION   = LC6_C5 ;
    "|fs_sft:1|sft_reg2"           : LOCATION   = LC4_C5 ;
    "|fs_sft:1|sft_reg3"           : LOCATION   = LC3_C5 ;
    "|fs_sft:1|sft_reg4"           : LOCATION   = LC5_C5 ;
    "|fs_sft:1|sft_reg5"           : LOCATION   = LC2_C5 ;
    "|fs_sft:1|sft_reg6"           : LOCATION   = LC1_C5 ;
    "|fs_sft:1|sft_reg7"           : LOCATION   = LC2_C16;
    "|fs_sft:1|sft_reg8"           : LOCATION   = LC4_C16;
    "|fs_sft:1|sft_reg9"           : LOCATION   = LC6_C16;
    "|g1p:3|:1"                    : LOCATION   = LC7_C17;
    "|g1p:3|:2"                    : LOCATION   = LC8_C17;
    "|g1p:3|:3"                    : LOCATION   = LC2_C17;  -- |g1p:3|1p
    ":4"                           : LOCATION   = LC5_C17;

END;

INTERNAL_INFO "fs_test"
BEGIN
	DEVICE = EPF10K10LC84-3;
    LC7_B13 : LORAX = "1:MSW6R1C13,G53R1->OH6R1P64|";
    OD4P1   : LORAX = "1:FB4->LC1_C16,->LC3_C16,->LC5_C16,->LC7_C16,->LC6_C17,->LC8_C5,->LC7_C5,->LC6_C5,->LC4_C5,->LC3_C5,->LC5_C5,->LC2_C5,->LC1_C5,->LC2_C16,->LC4_C16,->LC6_C16,->LC7_C17,->LC8_C17|2:CH0R1,PA19R1C12->LC7_B13||";
    LC1_C16 : LORAX = "1:MSW0R2C15,HHR19R2,PA17R2C16->LC4_C17|";
    LC3_C16 : LORAX = "1:MSW2R2C15,HHR14R2,PA1R2C16->LC3_C17,->LC1_C17|";
    LC5_C16 : LORAX = "1:MSW4R2C15,HHR38R2,PA11R2C16->LC3_C17,->LC1_C17|";
    LC7_C16 : LORAX = "1:MSW6R2C15,HHR26R2,PA21R2C16->LC3_C17,->LC4_C17|";
    LC3_C17 : LORAX = "1:MSW2R2C16,HHR0R2,PA1R2C15->LC1_C16,->LC3_C16,->LC5_C16,->LC7_C16|";
    LC1_C17 : LORAX = "1:MSW0R2C16,HHR18R2->OH0R2P62|";
    OD1P2   : LORAX = "1:FB1->LC7_C17,->LC8_C17|";
    OD3P42  : LORAX = "1:FB3|2:FH3R2,PA5R2C4->LC4_C5||";
    OD2P44  : LORAX = "1:FB2|2:FH2R2,PA6R2C4->LC3_C5||";
    OD0P84  : LORAX = "1:FB0|2:FH0R2,PA0R2C4->LC5_C5||";
    OD5P43  : LORAX = "1:FB5|2:CH1R2,PA7R2C4->LC2_C5||";
    OV0C2P7 : LORAX = "1:V1C2,HHL21R2,PA15R2C4->LC1_C5|";
    OV2C13P47 : LORAX = "1:V14C13,HHR36R2,PA20R2C15->LC2_C16|";
    OH10R2P28 : LORAX = "1:G41R2,PA18R2C15->LC4_C16|";
    OV0C23P78 : LORAX = "1:V1C23,HHR20R2,PA16R2C15->LC6_C16|";
    LC8_C5  : LORAX = "1:MSW7R2C4,V23C4,HHL25R1->OH15R1P25|";
    LC7_C5  : LORAX = "1:MSW6R2C4,G76R2->OH14R2P30|";
    LC6_C5  : LORAX = "1:MSW5R2C5,V16C5->OV2C5P35|";
    LC4_C5  : LORAX = "1:MSW3R2C4,G26R2->OH3R2P60|";
    LC3_C5  : LORAX = "1:MSW2R2C4,V7C4,HHL0R0->OH10R0P17|";
    LC5_C5  : LORAX = "1:MSW4R2C4,HHL44R2->OH12R2P29|";
    LC2_C5  : LORAX = "1:MSW1R2C4,V4C4->OV1C4P5|";
    LC1_C5  : LORAX = "1:MSW0R2C4,HHL18R2->OH8R2P27|";
    LC2_C16 : LORAX = "1:MSW2R2C14|2:G14R2,PA20R2C4->LC1_C5|,2:HHR1R2->OH2R2P61||";
    LC4_C16 : LORAX = "1:MSW3R2C15,V10C15->OV3C15P49|";
    LC6_C16 : LORAX = "1:MSW6R2C14,HHR40R2->OH6R2P58|";
    LC2_C17 : LORAX = "1:MSW1R2C16,V5C16->OV3C16P50|";
    LC5_C17 : LORAX = "1:MSW4R2C16|2:G62R2->OH4R2P59|3:PA19R2C4->LC8_C5,->LC7_C5,->LC6_C5,->LC4_C5,->LC3_C5,->LC5_C5,->LC2_C5,->LC1_C5||,2:HHR44R2,PA19R2C15->LC1_C16,->LC3_C16,->LC5_C16,->LC7_C16,->LC2_C16,->LC4_C16,->LC6_C16||";
	LC7_B13 : LORAX2 = "X, X, X, OD4P1";
	LC1_C16 : LORAX2 = "X, X, LC3_C17, LC1_C16";
	LC3_C16 : LORAX2 = "X, LC3_C17, LC3_C16, LC1_C16";
	LC5_C16 : LORAX2 = "LC3_C17, LC5_C16, LC3_C16, LC1_C16";
	LC7_C16 : LORAX2 = "LC3_C17, LC8_C16, LC5_C16, LC7_C16";
	LC6_C17 : LORAX2 = "X, X, X, LC6_C17";
	LC3_C17 : LORAX2 = "LC3_C16, LC5_C16, LC6_C17, LC7_C16";
	LC8_C16 : LORAX2 = "X, X, LC3_C16, LC1_C16";
	LC4_C17 : LORAX2 = "X, LC6_C17, LC1_C16, LC7_C16";
	LC1_C17 : LORAX2 = "X, LC3_C16, LC5_C16, LC4_C17";
	LC8_C5  : LORAX2 = "X, X, X, LC6_C5";
	LC7_C5  : LORAX2 = "X, X, X, LC6_C5";
	LC6_C5  : LORAX2 = "X, X, X, LC4_C5";
	LC4_C5  : LORAX2 = "X, X, OD3P42, LC3_C5";
	LC3_C5  : LORAX2 = "X, X, OD2P44, LC5_C5";
	LC5_C5  : LORAX2 = "X, X, OD0P84, LC2_C5";
	LC2_C5  : LORAX2 = "X, X, OD5P43, LC1_C5";
	LC1_C5  : LORAX2 = "X, X, OV0C2P7, LC2_C16";
	LC2_C16 : LORAX2 = "X, X, OV2C13P47, LC4_C16";
	LC4_C16 : LORAX2 = "X, X, OH10R2P28, LC6_C16";
	LC6_C16 : LORAX2 = "X, X, OV0C23P78, X";
	LC8_C17 : LORAX2 = "X, X, X, LC7_C17";
	LC2_C17 : LORAX2 = "X, X, LC8_C17, LC7_C17";
	LC5_C17 : LORAX2 = "X, X, LC2_C17, LC1_C17";
END;