test.fit

一个基于FPGA的串口程序,已经经过验证,对用FPGA做串口的朋友提供参考和借鉴!

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 04/30/2004 08:57:56      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "test"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk"                          : INPUT_PIN  = 1      ;
    "load"                         : INPUT_PIN  = 2      ;
    "pi0"                          : INPUT_PIN  = 19     ;
    "pi1"                          : INPUT_PIN  = 18     ;
    "pi2"                          : INPUT_PIN  = 16     ;
    "pi3"                          : INPUT_PIN  = 17     ;
    "pi4"                          : INPUT_PIN  = 43     ;
    "pi5"                          : INPUT_PIN  = 84     ;
    "pi6"                          : INPUT_PIN  = 44     ;
    "pi7"                          : INPUT_PIN  = 42     ;
    "po0"                          : OUTPUT_PIN = 67     ;
    "po1"                          : OUTPUT_PIN = 66     ;
    "po2"                          : OUTPUT_PIN = 64     ;
    "po3"                          : OUTPUT_PIN = 83     ;
    "po4"                          : OUTPUT_PIN = 69     ;
    "po5"                          : OUTPUT_PIN = 47     ;
    "po6"                          : OUTPUT_PIN = 72     ;
    "po7"                          : OUTPUT_PIN = 73     ;
    "po8"                          : OUTPUT_PIN = 71     ;
    "po9"                          : OUTPUT_PIN = 70     ;
    "so"                           : OUTPUT_PIN = 65     ;
    "|fs_sft:1|sft_reg0"           : LOCATION   = LC1_B13;
    "|fs_sft:1|sft_reg0~1"         : LOCATION   = LC5_B13;
    "|fs_sft:1|sft_reg1"           : LOCATION   = LC3_B13;
    "|fs_sft:1|sft_reg2"           : LOCATION   = LC7_A14;
    "|fs_sft:1|sft_reg3"           : LOCATION   = LC6_A14;
    "|fs_sft:1|sft_reg4"           : LOCATION   = LC8_A14;
    "|fs_sft:1|sft_reg5"           : LOCATION   = LC4_A14;
    "|fs_sft:1|sft_reg6"           : LOCATION   = LC2_A14;
    "|fs_sft:1|sft_reg7"           : LOCATION   = LC1_A14;
    "|fs_sft:1|sft_reg8"           : LOCATION   = LC3_A14;
    "|fs_sft:1|sft_reg9"           : LOCATION   = LC5_A14;

END;

INTERNAL_INFO "test"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD4P1   : LORAX = "1:FB4->LC5_B13,->LC1_B13,->LC3_B13,->LC7_A14,->LC6_A14,->LC8_A14,->LC4_A14,->LC2_A14,->LC1_A14,->LC3_A14,->LC5_A14|";
    LC5_B13 : LORAX = "1:MSW4R1C12,HHR41R1->OH4R1P65|";
    LC1_B13 : LORAX = "1:MSW0R1C12,HHR22R1->OH0R1P67|";
    LC3_B13 : LORAX = "1:MSW2R1C13,G2R1->OH2R1P66|";
    LC7_A14 : LORAX = "1:MSW6R0C13,V19C13,HHR32R1->OH6R1P64|2:PA3R1C12->LC3_B13||";
    LC6_A14 : LORAX = "1:MSW6R0C12,V18C12->OV1C12P83|";
    LC8_A14 : LORAX = "1:MSW7R0C13,HHR35R0->OH7R0P69|";
    LC4_A14 : LORAX = "1:MSW3R0C13,V9C13->OV2C13P47|";
    LC2_A14 : LORAX = "1:MSW2R0C12,HHR3R0->OH2R0P72|";
    LC1_A14 : LORAX = "1:MSW0R0C13,HHR23R0->OH0R0P73|";
    LC3_A14 : LORAX = "1:MSW3R0C12,G21R0->OH3R0P71|";
    LC5_A14 : LORAX = "1:MSW4R0C13,G93R0->OH4R0P70|";
    OD1P2   : LORAX = "1:FB1|2:FH1R0,PA20R0C13->LC7_A14,->LC6_A14,->LC8_A14,->LC4_A14,->LC2_A14,->LC1_A14,->LC3_A14,->LC5_A14|,2:FH1R1,PA20R1C12->LC5_B13,->LC1_B13,->LC3_B13||";
    OH14R0P19 : LORAX = "1:G44R0,PA6R0C13->LC7_A14|";
    OH12R0P18 : LORAX = "1:G40R0,PA19R0C13->LC6_A14|";
    OH8R0P16 : LORAX = "1:G13R0,PA4R0C13->LC8_A14|";
    OH10R0P17 : LORAX = "1:G41R0,PA18R0C13->LC4_A14|";
    OD5P43  : LORAX = "1:FB5|2:CH1R0,PA7R0C13->LC2_A14||";
    OD0P84  : LORAX = "1:FB0|2:FH0R0,PA0R0C13->LC1_A14||";
    OD2P44  : LORAX = "1:FB2|2:FH2R0,PA8R0C13->LC3_A14||";
    OD3P42  : LORAX = "1:FB3|2:FH3R0,PA5R0C13->LC5_A14||";
	LC5_B13 : LORAX2 = "X, X, OD1P2, LC3_B13";
	LC1_B13 : LORAX2 = "X, X, OD1P2, LC3_B13";
	LC3_B13 : LORAX2 = "X, X, OD1P2, LC7_A14";
	LC7_A14 : LORAX2 = "X, OH14R0P19, OD1P2, LC6_A14";
	LC6_A14 : LORAX2 = "X, OH12R0P18, OD1P2, LC8_A14";
	LC8_A14 : LORAX2 = "X, OH8R0P16, OD1P2, LC4_A14";
	LC4_A14 : LORAX2 = "X, OH10R0P17, OD1P2, LC2_A14";
	LC2_A14 : LORAX2 = "X, OD5P43, OD1P2, LC1_A14";
	LC1_A14 : LORAX2 = "X, OD0P84, OD1P2, LC3_A14";
	LC3_A14 : LORAX2 = "X, OD2P44, OD1P2, LC5_A14";
	LC5_A14 : LORAX2 = "X, X, OD3P42, OD1P2";
END;