m60.fit

VHDL电子抢答器的实现。有多个文件

-- MAX+plus II Compiler Fit File      
-- Version 10.1 06/12/2001            
-- Compiled: 12/12/2004 12:27:08      

-- Copyright (C) 1988-2001 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "m60"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk"                          : INPUT_PIN  = 1      ;
    "en"                           : INPUT_PIN  = 2      ;
    "eq"                           : INPUT_PIN  = 42     ;
    "alarm"                        : OUTPUT_PIN = 73     ;
    "c40"                          : OUTPUT_PIN = 66     ;
    "c41"                          : OUTPUT_PIN = 38     ;
    "c42"                          : OUTPUT_PIN = 21     ;
    "c43"                          : OUTPUT_PIN = 47     ;
    "h0"                           : OUTPUT_PIN = 72     ;
    "h1"                           : OUTPUT_PIN = 70     ;
    "h2"                           : OUTPUT_PIN = 69     ;
    "h3"                           : OUTPUT_PIN = 71     ;
    "l0"                           : OUTPUT_PIN = 16     ;
    "l1"                           : OUTPUT_PIN = 18     ;
    "l2"                           : OUTPUT_PIN = 17     ;
    "l3"                           : OUTPUT_PIN = 19     ;
    "|LPM_ADD_SUB:85|addcore:adder|pcarry2" : LOCATION   = LC1_A23;
    "|LPM_ADD_SUB:90|addcore:adder|pcarry1" : LOCATION   = LC4_A3 ;
    ":4"                           : LOCATION   = LC1_A21;
    ":18"                          : LOCATION   = LC7_A3 ;  -- dw3
    ":19"                          : LOCATION   = LC3_A3 ;  -- dw2
    ":20"                          : LOCATION   = LC5_A3 ;  -- dw1
    ":21"                          : LOCATION   = LC1_A3 ;  -- dw0
    ":22"                          : LOCATION   = LC4_A23;  -- gw3
    ":23"                          : LOCATION   = LC8_A23;  -- gw2
    ":24"                          : LOCATION   = LC5_A23;  -- gw1
    ":25"                          : LOCATION   = LC3_A23;  -- gw0
    ":73"                          : LOCATION   = LC7_A23;
    ":74"                          : LOCATION   = LC6_A3 ;
    ":112"                         : LOCATION   = LC8_A3 ;
    ":157"                         : LOCATION   = LC6_A23;
    ":175"                         : LOCATION   = LC2_A18;
    "~269~1"                       : LOCATION   = LC2_A3 ;
    "~287~1"                       : LOCATION   = LC2_A23;

END;

INTERNAL_INFO "m60"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD4P1   : LORAX = "1:FB4->LC1_A21,->LC7_A3,->LC3_A3,->LC5_A3,->LC1_A3,->LC4_A23,->LC8_A23,->LC5_A23,->LC3_A23|";
    OD1P2   : LORAX = "1:FB1|2:FH1R0|3:PA20R0C2->LC7_A3,->LC1_A3,->LC2_A3|,3:PA20R0C20->LC1_A21|,3:PA20R0C22->LC8_A23,->LC3_A23,->LC2_A23|||";
    OD3P42  : LORAX = "1:FB3|2:FH3R0|3:PA5R0C2->LC7_A3,->LC1_A3,->LC2_A3|,3:PA5R0C20->LC1_A21|,3:PA5R0C22->LC8_A23,->LC3_A23,->LC2_A23|||";
    LC1_A21 : LORAX = "1:MSW0R0C20,HHR21R0->OH0R0P73|";
    LC7_A3  : LORAX = "1:MSW6R0C3,G74R0->OH14R0P19|";
    LC3_A3  : LORAX = "1:MSW2R0C3,HHL14R0->OH10R0P17|";
    LC5_A3  : LORAX = "1:MSW4R0C2,HHL43R0->OH12R0P18|";
    LC1_A3  : LORAX = "1:MSW0R0C2,HHL21R0->OH8R0P16|";
    LC4_A23 : LORAX = "1:MSW3R0C22,G31R0->OH3R0P71|";
    LC8_A23 : LORAX = "1:MSW7R0C22,HHR25R0->OH7R0P69|";
    LC5_A23 : LORAX = "1:MSW4R0C23,HHR30R0->OH4R0P70|";
    LC3_A23 : LORAX = "1:MSW2R0C23,HHR15R0->OH2R0P72|2:PA0R0C17->LC2_A18||";
    LC7_A23 : LORAX = "1:MSW6R0C22|2:G82R0,PA19R0C2->LC7_A3,->LC1_A3|,2:HHR31R0,PA4R0C20->LC1_A21||";
    LC6_A3  : LORAX = "1:MSW5R0C2,G57R0|2:PA3R0C17->LC2_A18|,2:PA13R0C22->LC4_A23,->LC5_A23,->LC7_A23,->LC6_A23||";
    LC2_A18 : LORAX = "1:MSW2R0C16,HHR0R0,PA21R0C22->LC3_A23|";
	LC1_A23 : LORAX2 = "X, LC8_A23, LC3_A23, LC5_A23";
	LC4_A3  : LORAX2 = "X, X, LC5_A3, LC1_A3";
	LC1_A21 : LORAX2 = "OD3P42, OD1P2, LC1_A21, LC7_A23";
	LC7_A3  : LORAX2 = "OD3P42, OD1P2, LC8_A3, LC7_A23";
	LC3_A3  : LORAX2 = "LC2_A3, LC4_A3, LC3_A3, LC6_A3";
	LC5_A3  : LORAX2 = "LC2_A3, LC5_A3, LC1_A3, LC6_A3";
	LC1_A3  : LORAX2 = "OD3P42, OD1P2, LC7_A23, LC1_A3";
	LC4_A23 : LORAX2 = "LC4_A23, LC1_A23, LC2_A23, LC6_A3";
	LC8_A23 : LORAX2 = "OD3P42, OD1P2, LC6_A23, LC7_A23";
	LC5_A23 : LORAX2 = "LC5_A23, LC3_A23, LC6_A3, LC2_A23";
	LC3_A23 : LORAX2 = "OD3P42, OD1P2, LC2_A18, LC7_A23";
	LC7_A23 : LORAX2 = "X, LC4_A23, LC1_A23, LC6_A3";
	LC6_A3  : LORAX2 = "LC7_A3, LC3_A3, LC5_A3, LC1_A3";
	LC8_A3  : LORAX2 = "LC7_A3, LC3_A3, LC5_A3, LC1_A3";
	LC6_A23 : LORAX2 = "LC8_A23, LC5_A23, LC3_A23, LC6_A3";
	LC2_A18 : LORAX2 = "X, X, LC3_A23, LC6_A3";
	LC2_A3  : LORAX2 = "X, X, OD1P2, OD3P42";
	LC2_A23 : LORAX2 = "X, OD1P2, OD3P42, LC7_A23";
END;