_impact.log

使用CPLD进行驱动电机演示

iMPACT Version: 
iMPACT log file Started on Sun Mar 26 23:45:51 2006

// *** BATCH CMD : setPreference -pref AutoSignature:FALSE
// *** BATCH CMD : setPreference -pref KeepSVF:FALSE
// *** BATCH CMD : setPreference -pref ConcurrentMode:FALSE
// *** BATCH CMD : setPreference -pref UseHighz:FALSE
// *** BATCH CMD : setPreference -pref svfUseTime:FALSE
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
GUI --- Auto connect to cable...
// *** BATCH CMD : setCable -port auto
AutoDetecting cable. Please wait.
PROGRESS_START - Starting Operation.
Connecting to cable (Parallel Port - LPT1).
Checking cable driver.
 Driver windrvr6.sys version = 7.0.0.0. LPT base address = 0378h.
 ECP base address = 0778h.
Cable connection established.
PROGRESS_END - End Operation.
Elapsed time =      1 sec.
Attempting to identify devices in the boundary-scan chain configuration...Command: Identify 
// *** BATCH CMD : Identify
PROGRESS_START - Starting Operation.
Identifying chain contents ....'1': : Manufacturer's ID =Xilinx xc9536, Version : 2
INFO:iMPACT:1777 - 
   Reading D:/Xilinx/xc9500/data/xc9536.bsd...
INFO:iMPACT:501 - '1': Added Device xc9536 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
done.
Chain TCK freq = 0.
Validating chain...
Boundary-scan chain validated successfully.
PROGRESS_END - End Operation.
Elapsed time =      0 sec.
// *** BATCH CMD : identifyMPM
// *** BATCH CMD : assignFile -p 1 -file "D:/temp/Xilinx/moto/moto2/moto.jed"
'1': Loading file 'D:/temp/Xilinx/moto/moto2/moto.jed' ...
done.
INFO:iMPACT:501 - '1': Added Device xc9536 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
Command: Verify -p 0 
// *** BATCH CMD : Verify -p 1 
PROGRESS_START - Starting Operation.
Chain TCK freq = 0.
Validating chain...
Boundary-scan chain validated successfully.
'1': Putting device in ISP mode...done
'1': Putting device in ISP mode...done
'1': Verifying device...'1': Verification failed'1': Verification terminated
PROGRESS_END - End Operation.
Elapsed time =      0 sec.
Command: Program -p 0 -e -v -defaultVersion 0 
// *** BATCH CMD : Program -p 1 -e -v -defaultVersion 0 
PROGRESS_START - Starting Operation.
Chain TCK freq = 0.
Validating chain...
Boundary-scan chain validated successfully.
'1': Erasing device...
Erasure completed successfully.
'1': Programming device...
done.
'1': Putting device in ISP mode...done
'1': Verifying device...done.
'1': Verification completed successfully.
Programming completed successfully.
PROGRESS_END - End Operation.
Elapsed time =     12 sec.
Command: Verify -p 0 
// *** BATCH CMD : Verify -p 1 
PROGRESS_START - Starting Operation.
Chain TCK freq = 0.
Validating chain...
Boundary-scan chain validated successfully.
'1': Putting device in ISP mode...done
'1': Putting device in ISP mode...done
'1': Verifying device...done.
'1': Verification completed successfully.
PROGRESS_END - End Operation.
Elapsed time =      1 sec.
// *** BATCH CMD : assignFile -p 1 -file "D:/temp/Xilinx/moto/moto2/moto.jed"
'1': Loading file 'D:/temp/Xilinx/moto/moto2/moto.jed' ...
done.
INFO:iMPACT:501 - '1': Added Device xc9536 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
Command: Program -p 0 -e -v -defaultVersion 0 
// *** BATCH CMD : Program -p 1 -e -v -defaultVersion 0 
Updating config file D:/temp/Xilinx/moto/moto2/moto.jed...
PROGRESS_START - Starting Operation.
Chain TCK freq = 0.
Validating chain...
Boundary-scan chain validated successfully.
'1': Erasing device...
Erasure completed successfully.
'1': Programming device...
done.
'1': Putting device in ISP mode...done
'1': Verifying device...done.
'1': Verification completed successfully.
Programming completed successfully.
PROGRESS_END - End Operation.
Elapsed time =     12 sec.
// *** BATCH CMD : assignFile -p 1 -file "D:/temp/Xilinx/moto/moto2/moto.jed"
'1': Loading file 'D:/temp/Xilinx/moto/moto2/moto.jed' ...
done.
INFO:iMPACT:501 - '1': Added Device xc9536 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
Command: Program -p 0 -e -v -defaultVersion 0 
// *** BATCH CMD : Program -p 1 -e -v -defaultVersion 0 
Updating config file D:/temp/Xilinx/moto/moto2/moto.jed...
PROGRESS_START - Starting Operation.
Chain TCK freq = 0.
Validating chain...
Boundary-scan chain validated successfully.
'1': Erasing device...
Erasure completed successfully.
'1': Programming device...
done.
'1': Putting device in ISP mode...done
'1': Verifying device...done.
'1': Verification completed successfully.
Programming completed successfully.
PROGRESS_END - End Operation.
Elapsed time =     10 sec.