send.rpt

RS232通讯VHDL源代码,MAXPLUS 2环境执行通过

LC      | | | | | | | | | | | | | | | | | A B C D E F G H |     Logic cells that feed LAB 'G':
LC98 -> * * * * * * * * * * * * * * * - | * - - - - - * * | <-- bitcnt_reg1
LC97 -> * * * * * * * * * * * * * * * - | * - - - - - * * | <-- bitcnt_reg0
LC107-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~216~1
LC106-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~394~1
LC105-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~412~1
LC101-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~429~1
LC100-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~430~1
LC99 -> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~432~1
LC108-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~484~1

Pin
83   -> - - - - - - - - - - - - - - - - | - - - - - - - - | <-- clock
2    -> - * - - - * - * * - * * - * - - | * - - - - - * * | <-- key_start
LC88 -> * * - - - - - - - - - - - - - - | * - - - - - * - | <-- bit_start
LC16 -> * * * * * * * * * * * * * * * - | * - - - - - * * | <-- bitcnt_reg3
LC1  -> - * - - - * - * * - * * - * - - | * - - - - - * * | <-- bitcnt_reg2
LC121-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~215~1
LC123-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~217~1
LC122-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~218~1
LC12 -> - - - - - - - - - - - - - - - * | - - - - - - * - | <-- ~375~1
LC10 -> - - - - - - - - - - - - - - - * | - - - - - - * - | <-- ~376~1
LC13 -> - - - - - - - - - - - - - - - * | - - - - - - * - | <-- ~377~1
LC11 -> - - - - - - - - - - - - - - - * | - - - - - - * - | <-- ~378~1
LC117-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~393~1
LC116-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~395~1
LC124-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~396~1
LC114-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~411~1
LC119-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~413~1
LC120-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~414~1
LC118-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~431~1
LC3  -> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~483~1
LC127-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~485~1
LC9  -> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~486~1
LC113-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~518~1
LC115-> - - - - - - - - - - - - - - - * | - - - - - - * - | <-- ~534~1


* = The logic cell or pin is an input to the logic cell (or LAB) through the PIA.
- = The logic cell or pin is not an input to the logic cell (or LAB).


Device-Specific Information:                   c:\maxplus2\files\send\send.rpt
send

** LOGIC CELL INTERCONNECTIONS **

Logic Array Block 'H':

                                         Logic cells placed in LAB 'H'
        +------------------------------- LC121 ~215~1
        | +----------------------------- LC123 ~217~1
        | | +--------------------------- LC122 ~218~1
        | | | +------------------------- LC117 ~393~1
        | | | | +----------------------- LC116 ~395~1
        | | | | | +--------------------- LC124 ~396~1
        | | | | | | +------------------- LC114 ~411~1
        | | | | | | | +----------------- LC119 ~413~1
        | | | | | | | | +--------------- LC120 ~414~1
        | | | | | | | | | +------------- LC118 ~431~1
        | | | | | | | | | | +----------- LC126 ~449~1
        | | | | | | | | | | | +--------- LC128 ~467~1
        | | | | | | | | | | | | +------- LC127 ~485~1
        | | | | | | | | | | | | | +----- LC125 ~500~1
        | | | | | | | | | | | | | | +--- LC113 ~518~1
        | | | | | | | | | | | | | | | +- LC115 ~534~1
        | | | | | | | | | | | | | | | | 
        | | | | | | | | | | | | | | | |   Other LABs fed by signals
        | | | | | | | | | | | | | | | |   that feed LAB 'H'
LC      | | | | | | | | | | | | | | | | | A B C D E F G H |     Logic cells that feed LAB 'H':
LC121-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~215~1
LC123-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~217~1
LC122-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~218~1
LC117-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~393~1
LC116-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~395~1
LC124-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~396~1
LC114-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~411~1
LC119-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~413~1
LC120-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~414~1
LC118-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~431~1
LC126-> - - - - - - - - - - - - - - - * | - - - - - - - * | <-- ~449~1
LC128-> - - - - - - - - - - - - - - - * | - - - - - - - * | <-- ~467~1
LC127-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~485~1
LC125-> - - - - - - - - - - - - - - - * | - - - - - - - * | <-- ~500~1
LC113-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~518~1

Pin
83   -> - - - - - - - - - - - - - - - - | - - - - - - - - | <-- clock
2    -> * - * * - * * - * - - - - - * * | * - - - - - * * | <-- key_start
LC5  -> - * - - * - - * - * * * * * * * | * - - - - - - * | <-- |lpm_add_sub:551|addcore:adder|addcore:adder0|result_node2
LC16 -> * * * * * * * * * * * * * * * * | * - - - - - * * | <-- bitcnt_reg3
LC1  -> * * * * * * * * * * * * * * * * | * - - - - - * * | <-- bitcnt_reg2
LC98 -> * * * * * * * * * * * * * * * * | * - - - - - * * | <-- bitcnt_reg1
LC97 -> * * * * * * * * * * * * * * * * | * - - - - - * * | <-- bitcnt_reg0
LC107-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~216~1
LC106-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~394~1
LC105-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~412~1
LC101-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~429~1
LC100-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~430~1
LC99 -> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~432~1
LC103-> - - - - - - - - - - - - - - - * | - - - - - - - * | <-- ~447~1
LC104-> - - - - - - - - - - - - - - - * | - - - - - - - * | <-- ~448~1
LC112-> - - - - - - - - - - - - - - - * | - - - - - - - * | <-- ~450~1
LC111-> - - - - - - - - - - - - - - - * | - - - - - - - * | <-- ~465~1
LC110-> - - - - - - - - - - - - - - - * | - - - - - - - * | <-- ~466~1
LC109-> - - - - - - - - - - - - - - - * | - - - - - - - * | <-- ~468~1
LC3  -> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~483~1
LC108-> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~484~1
LC9  -> - - - - - - - - - - - - - - - * | - - - - - - * * | <-- ~486~1


* = The logic cell or pin is an input to the logic cell (or LAB) through the PIA.
- = The logic cell or pin is not an input to the logic cell (or LAB).


Device-Specific Information:                   c:\maxplus2\files\send\send.rpt
send

** EQUATIONS **

clock    : INPUT;
key_send0 : INPUT;
key_send1 : INPUT;
key_send2 : INPUT;
key_send3 : INPUT;
key_send4 : INPUT;
key_send5 : INPUT;
key_send6 : INPUT;
key_send7 : INPUT;
key_start : INPUT;

-- Node name is ':183' = 'bitcnt_reg0' 
-- Equation name is 'bitcnt_reg0', location is LC097, type is buried.
bitcnt_reg0 = DFFE( _EQ001 $  GND,  bit_start,  VCC,  VCC,  VCC);
  _EQ001 = !bitcnt_reg0 & !bitcnt_reg1 & !bitcnt_reg2
         #  bitcnt_reg3 &  key_start
         # !bitcnt_reg0 & !bitcnt_reg3;

-- Node name is ':182' = 'bitcnt_reg1' 
-- Equation name is 'bitcnt_reg1', location is LC098, type is buried.
bitcnt_reg1 = DFFE( _EQ002 $ !bitcnt_reg3,  bit_start,  VCC,  VCC,  VCC);
  _EQ002 =  bitcnt_reg0 &  bitcnt_reg1 & !bitcnt_reg3
         # !bitcnt_reg0 & !bitcnt_reg1 & !bitcnt_reg3;

-- Node name is ':181' = 'bitcnt_reg2' 
-- Equation name is 'bitcnt_reg2', location is LC001, type is buried.
bitcnt_reg2 = DFFE( _EQ003 $  GND,  bit_start,  VCC,  VCC,  VCC);
  _EQ003 = !bitcnt_reg0 & !bitcnt_reg1 & !bitcnt_reg2 &  bitcnt_reg3 & 
              _LC005
         # !bitcnt_reg3 &  _LC005;

-- Node name is ':180' = 'bitcnt_reg3' 
-- Equation name is 'bitcnt_reg3', location is LC016, type is buried.
bitcnt_reg3 = DFFE( _EQ004 $  VCC,  bit_start,  VCC,  VCC,  VCC);
  _EQ004 =  bitcnt_reg3 & !key_start &  _X001
         # !bitcnt_reg3 &  _X002;
  _X001  = EXP(!bitcnt_reg0 & !bitcnt_reg1 & !bitcnt_reg2 & !_LC015);
  _X002  = EXP( bitcnt_reg0 &  bitcnt_reg1 &  bitcnt_reg2);

-- Node name is ':103' = 'bit_start' 
-- Equation name is 'bit_start', location is LC088, type is buried.
bit_start = DFFE( _EQ005 $  count10, GLOBAL( clock),  VCC,  VCC,  VCC);
  _EQ005 = !count7 & !count8 & !count9 &  count10;

-- Node name is ':99' = 'count0' 
-- Equation name is 'count0', location is LC091, type is buried.
count0   = DFFE( _EQ006 $ !count10, GLOBAL( clock),  VCC,  VCC,  VCC);
  _EQ006 = !count0 & !count7 & !count8 & !count9 &  count10
         #  count0 & !count10;

-- Node name is ':98' = 'count1' 
-- Equation name is 'count1', location is LC094, type is buried.
count1   = DFFE( _EQ007 $ !count10, GLOBAL( clock),  VCC,  VCC,  VCC);
  _EQ007 = !count7 & !count8 & !count9 &  count10 &  _LC067
         # !count10 & !_LC067;

-- Node name is ':97' = 'count2' 
-- Equation name is 'count2', location is LC004, type is buried.
count2   = DFFE( _EQ008 $ !count10, GLOBAL( clock),  VCC,  VCC,  VCC);
  _EQ008 = !count7 & !count8 & !count9 &  count10 &  _LC087
         # !count10 & !_LC087;

-- Node name is ':96' = 'count3' 
-- Equation name is 'count3', location is LC006, type is buried.
count3   = DFFE( _EQ009 $ !count10, GLOBAL( clock),  VCC,  VCC,  VCC);
  _EQ009 = !count7 & !count8 & !count9 &  count10 &  _LC092
         # !count10 & !_LC092;

-- Node name is ':95' = 'count4' 
-- Equation name is 'count4', location is LC007, type is buried.
count4   = DFFE( _EQ010 $ !count10, GLOBAL( clock),  VCC,  VCC,  VCC);
  _EQ010 = !count7 & !count8 & !count9 &  count10 &  _LC096
         # !count10 & !_LC096;

-- Node name is ':94' = 'count5' 
-- Equation name is 'count5', location is LC008, type is buried.
count5   = DFFE( _EQ011 $ !count10, GLOBAL( clock),  VCC,  VCC,  VCC);
  _EQ011 = !count7 & !count8 & !count9 &  count10 &  _LC086
         # !count10 & !_LC086;

-- Node name is ':93' = 'count6' 
-- Equation name is 'count6', location is LC095, type is buried.
count6   = DFFE( _EQ012 $ !count10, GLOBAL( clock),  VCC,  VCC,  VCC);
  _EQ012 = !count7 & !count8 & !count9 &  count10 &  _LC085
         # !count10 & !_LC085;

-- Node name is ':92' = 'count7' 
-- Equation name is 'count7', location is LC090, type is buried.
count7   = DFFE( _EQ013 $ !count10, GLOBAL( clock),  VCC,  VCC,  VCC);
  _EQ013 = !count7 & !count8 & !count9 &  count10 &  _LC084
         # !count10 & !_LC084;

-- Node name is ':91' = 'count8' 
-- Equation name is 'count8', location is LC089, type is buried.
count8   = DFFE( _EQ014 $ !count10, GLOBAL( clock),  VCC,  VCC,  VCC);
  _EQ014 = !count7 & !count8 & !count9 &  count10 &  _LC083
         # !count10 & !_LC083;

-- Node name is ':90' = 'count9' 
-- Equation name is 'count9', location is LC082, type is buried.
count9   = DFFE( _EQ015 $ !count10, GLOBAL( clock),  VCC,  VCC,  VCC);
  _EQ015 = !count7 & !count8 & !count9 &  count10 &  _LC093
         # !count10 & !_LC093;

-- Node name is ':89' = 'count10' 
-- Equation name is 'count10', location is LC081, type is buried.
count10  = DFFE( _EQ016 $  GND, GLOBAL( clock),  VCC,  VCC,  VCC);
  _EQ016 =  count0 &  count1 &  count2 &  count3 &  count4 &  count5 & 
              count6 &  count7 &  count8 &  count9 & !count10
         # !count7 & !count8 & !count9 &  count10;

-- Node name is 'txd' = 'txd_reg' 
-- Equation name is 'txd', location is LC014, type is output.
 txd     = DFFE( _EQ017 $  GND,  bit_start,  VCC,  VCC,  VCC);
  _EQ017 =  txd &  _X003 &  _X004 &  _X005 &  _X006 &  _X007 &  _X008 & 
              _X009 &  _X010
         #  _LC002 &  _LC102;
  _X003  = EXP( key_send0 &  key_send1 & !key_send2 &  key_send3 &  key_send4 & 
              key_send5 &  key_send6 &  key_send7);
  _X004  = EXP( key_send0 & !key_send1 &  key_send2 &  key_send3 &  key_send4 & 
              key_send5 &  key_send6 &  key_send7);
  _X005  = EXP( key_send0 &  key_send1 &  key_send2 & !key_send3 &  key_send4 & 
              key_send5 &  key_send6 &  key_send7);
  _X006  = EXP( key_send0 &  key_send1 &  key_send2 &  key_send3 &  key_send4 & 
             !key_send5 &  key_send6 &  key_send7);
  _X007  = EXP( key_send0 &  key_send1 &  key_send2 &  key_send3 &  key_send4 & 
              key_send5 & !key_send6 &  key_send7);
  _X008  = EXP( key_send0 &  key_send1 &  key_send2 &  key_send3 & !key_send4 & 
              key_send5 &  key_send6 &  key_send7);
  _X009  = EXP( key_send0 &  key_send1 &  key_send2 &  key_send3 &  key_send4 & 
              key_send5 &  key_send6 & !key_send7);
  _X010  = EXP(!key_send0 &  key_send1 &  key_send2 &  key_send3 &  key_send4 & 
              key_send5 &  key_send6 &  key_send7);

-- Node name is '|lpm_add_sub:550|addcore:adder|addcore:adder0|result_node1' from file "addcore.tdf" line 164, column 16
-- Equation name is '_LC067', type is buried 
_LC067   = LCELL(!count1 $ !count0);

-- Node name is '|lpm_add_sub:550|addcore:adder|addcore:adder0|result_node2' from file "addcore.tdf" line 164, column 16
-- Equation name is '_LC087', type is buried 
_LC087   = LCELL( count2 $  _EQ018);
  _EQ018 =  count0 &  count1;