usbf_wb.v

USB2.0 chip的一部分verilog源码。opencore上下的

`include "usbf_defines.v"

module usbf_wb(	// WISHBONE Interface
		wb_clk, phy_clk, rst, wb_addr_i, wb_data_i, wb_data_o, 
		wb_ack_o, wb_we_i, wb_stb_i, wb_cyc_i,

		// Memory Arbiter Interface
		ma_adr, ma_dout, ma_din, ma_we, ma_req, ma_ack,

		// Register File interface
		rf_re, rf_we, rf_din, rf_dout);

input		wb_clk, phy_clk;
input		rst;
input	[`USBF_UFC_HADR:0]	wb_addr_i;
input	[31:0]	wb_data_i;
output	[31:0]	wb_data_o;
output		wb_ack_o;
input		wb_we_i;
input		wb_stb_i;
input		wb_cyc_i;

// Memory Arbiter Interface
output	[`USBF_UFC_HADR:0]	ma_adr;
output	[31:0]	ma_dout;
input	[31:0]	ma_din;
output		ma_we;
output		ma_req;
input		ma_ack;

// Register File interface
output		rf_re;
output		rf_we;
input	[31:0]	rf_din;
output	[31:0]	rf_dout;

///////////////////////////////////////////////////////////////////
//
// Local Wires and Registers
//

parameter	[5:0]	// synopsys enum state
		IDLE	= 6'b00_0001,
		MA_WR	= 6'b00_0010,
		MA_RD	= 6'b00_0100,
		W0	= 6'b00_1000,
		W1	= 6'b01_0000,
		W2	= 6'b10_0000;

reg	[5:0]	/* synopsys enum state */ state, next_state;
// synopsys state_vector state

reg		wb_req_s1;
reg		wb_ack_d, wb_ack_s1, wb_ack_s1a, wb_ack_s2;
reg		ma_we;
reg		rf_re, rf_we_d;
reg		ma_req;
reg		wb_ack_o;
reg	[31:0]	wb_data_o;

///////////////////////////////////////////////////////////////////
//
// Interface Logic
//

assign ma_adr = wb_addr_i;
assign ma_dout = wb_data_i;
assign rf_dout = wb_data_i;

always @(posedge wb_clk)
	if( `USBF_RF_SEL )	wb_data_o <= rf_din;
	else			wb_data_o <= ma_din;

// Sync WISHBONE Request
always @(posedge phy_clk)
	wb_req_s1 <= wb_stb_i & wb_cyc_i;

// Sync WISHBONE Ack
always @(posedge wb_clk)
	wb_ack_s1 <= wb_ack_d;

always @(posedge wb_clk)
	wb_ack_o <= wb_ack_s1 & !wb_ack_s2 & !wb_ack_o;

always @(posedge wb_clk)
	wb_ack_s1a <= wb_ack_s1;

always @(posedge wb_clk)
	wb_ack_s2 <= wb_ack_s1a;

assign	rf_we = rf_we_d;

///////////////////////////////////////////////////////////////////
//
// Interface State Machine
//

`ifdef USBF_ASYNC_RESET
always @(posedge phy_clk or negedge rst)
`else
always @(posedge phy_clk)
`endif
	if(!rst)	state <= IDLE;
	else		state <= next_state;

always @(state or wb_req_s1 or wb_addr_i or ma_ack or wb_we_i)
   begin
	next_state = state;
	ma_req = 1'b0;
	ma_we = 1'b0;
	wb_ack_d = 1'b0;
	rf_re = 1'b0;
	rf_we_d = 1'b0;

	case(state)		// synopsys full_case parallel_case
	   IDLE:
	     begin
		if(wb_req_s1 && `USBF_MEM_SEL && wb_we_i)	
		   begin
			ma_req = 1'b1;
			ma_we = 1'b1;
			next_state = MA_WR;
		   end
		if(wb_req_s1 && `USBF_MEM_SEL && !wb_we_i)
		   begin
			ma_req = 1'b1;
			next_state = MA_RD;
		   end
		if(wb_req_s1 && `USBF_RF_SEL && wb_we_i)
		   begin
			rf_we_d = 1'b1;
			next_state = W0;
		   end
		if(wb_req_s1 && `USBF_RF_SEL && !wb_we_i)
		   begin
			rf_re = 1'b1;
			next_state = W0;
		   end
	     end

	   MA_WR:
	     begin
		if(!ma_ack)
		   begin
			ma_req = 1'b1;
			ma_we = 1'b1;
		   end
		else
		   begin
			wb_ack_d = 1'b1;
			next_state = W1;
		   end
	     end

	   MA_RD:
	     begin
		if(!ma_ack)
		   begin
			ma_req = 1'b1;
		   end
		else
		   begin
			wb_ack_d = 1'b1;
			next_state = W2;
		   end
	     end

	   W0:
	     begin
			wb_ack_d = 1'b1;
			next_state = W1;
	     end

	   W1:
	     begin
			next_state = W2;
	     end

	   W2:
	     begin
			next_state = IDLE;
	     end

	endcase
   end

endmodule