📄 cnt4000.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.2 07/10/2002
-- Compiled: 08/08/2003 16:35:09
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "cnt4000"
BEGIN
DEVICE = "EPF10K10LC84-4";
"clk" : INPUT_PIN = 1 ;
"en" : INPUT_PIN = 42 ;
"reset" : INPUT_PIN = 2 ;
"carry1" : OUTPUT_PIN = 59 ;
"q0" : OUTPUT_PIN = 83 ;
"q1" : OUTPUT_PIN = 60 ;
"q2" : OUTPUT_PIN = 29 ;
"q3" : OUTPUT_PIN = 6 ;
"q4" : OUTPUT_PIN = 7 ;
"q5" : OUTPUT_PIN = 28 ;
"q6" : OUTPUT_PIN = 27 ;
"q7" : OUTPUT_PIN = 30 ;
"q8" : OUTPUT_PIN = 62 ;
"q9" : OUTPUT_PIN = 58 ;
"q10" : OUTPUT_PIN = 61 ;
"|LPM_ADD_SUB:203|addcore:adder|:171" : LOCATION = LC1_C3 ;
"|LPM_ADD_SUB:203|addcore:adder|:179" : LOCATION = LC4_C3 ;
"|LPM_ADD_SUB:203|addcore:adder|:187" : LOCATION = LC7_C22;
"|LPM_ADD_SUB:203|addcore:adder|:191" : LOCATION = LC5_C22;
"|LPM_ADD_SUB:203|addcore:adder|:199" : LOCATION = LC6_C23;
"|LPM_ADD_SUB:203|addcore:adder|:203" : LOCATION = LC4_C23;
"|LPM_ADD_SUB:203|addcore:adder|:211" : LOCATION = LC6_C16;
"|LPM_ADD_SUB:203|addcore:adder|:215" : LOCATION = LC5_C17;
"|LPM_ADD_SUB:203|addcore:adder|:223" : LOCATION = LC4_C17;
"|LPM_ADD_SUB:203|addcore:adder|:227" : LOCATION = LC3_C21;
"|LPM_ADD_SUB:203|addcore:adder|:235" : LOCATION = LC6_C21;
"|LPM_ADD_SUB:203|addcore:adder|:239" : LOCATION = LC2_C14;
"|LPM_ADD_SUB:203|addcore:adder|:247" : LOCATION = LC1_C15;
"|LPM_ADD_SUB:203|addcore:adder|:255" : LOCATION = LC4_C15;
"|LPM_ADD_SUB:203|addcore:adder|:259" : LOCATION = LC8_C18;
"|LPM_ADD_SUB:203|addcore:adder|:267" : LOCATION = LC1_C13;
"|LPM_ADD_SUB:203|addcore:adder|:275" : LOCATION = LC1_C18;
"|LPM_ADD_SUB:203|addcore:adder|:279" : LOCATION = LC8_C19;
":16" : LOCATION = LC7_C19; -- ca
":17" : LOCATION = LC7_C24; -- q400031
":18" : LOCATION = LC2_C19; -- q400030
":19" : LOCATION = LC3_C19; -- q400029
":20" : LOCATION = LC7_C18; -- q400028
":21" : LOCATION = LC3_C18; -- q400027
":22" : LOCATION = LC8_C13; -- q400026
":23" : LOCATION = LC6_C13; -- q400025
":24" : LOCATION = LC6_C18; -- q400024
":25" : LOCATION = LC6_C15; -- q400023
":26" : LOCATION = LC3_C15; -- q400022
":27" : LOCATION = LC5_C14; -- q400021
":28" : LOCATION = LC2_C24; -- q400020
":29" : LOCATION = LC8_C14; -- q400019
":30" : LOCATION = LC4_C21; -- q400018
":31" : LOCATION = LC7_C21; -- q400017
":32" : LOCATION = LC8_C21; -- q400016
":33" : LOCATION = LC8_C17; -- q400015
":34" : LOCATION = LC3_C17; -- q400014
":35" : LOCATION = LC4_C13; -- q400013
":36" : LOCATION = LC8_C16; -- q400012
":37" : LOCATION = LC4_C16; -- q400011
":38" : LOCATION = LC3_C23; -- q400010
":39" : LOCATION = LC7_C23; -- q40009
":40" : LOCATION = LC1_C23; -- q40008
":41" : LOCATION = LC6_C22; -- q40007
":42" : LOCATION = LC1_C22; -- q40006
":43" : LOCATION = LC2_C22; -- q40005
":44" : LOCATION = LC8_C3 ; -- q40004
":45" : LOCATION = LC2_C3 ; -- q40003
":46" : LOCATION = LC5_C3 ; -- q40002
":47" : LOCATION = LC4_C14; -- q40001
":48" : LOCATION = LC1_C14; -- q40000
":133" : LOCATION = LC1_C24;
"~133~1" : LOCATION = LC1_C17;
"~133~2" : LOCATION = LC7_C17;
"~133~3" : LOCATION = LC3_C24;
"~133~4" : LOCATION = LC2_C13;
"~133~5" : LOCATION = LC8_C15;
"~133~6" : LOCATION = LC4_C24;
"~133~7" : LOCATION = LC5_C24;
"~133~8" : LOCATION = LC2_C16;
":433" : LOCATION = LC6_C24;
":442" : LOCATION = LC6_C19;
":451" : LOCATION = LC4_C19;
":460" : LOCATION = LC2_C18;
":469" : LOCATION = LC5_C18;
":478" : LOCATION = LC7_C13;
":487" : LOCATION = LC5_C13;
":496" : LOCATION = LC4_C18;
":505" : LOCATION = LC5_C15;
":514" : LOCATION = LC2_C15;
":523" : LOCATION = LC3_C14;
":532" : LOCATION = LC8_C24;
":541" : LOCATION = LC6_C14;
":550" : LOCATION = LC5_C21;
":559" : LOCATION = LC2_C21;
":568" : LOCATION = LC1_C21;
":577" : LOCATION = LC6_C17;
":586" : LOCATION = LC2_C17;
":595" : LOCATION = LC3_C13;
":604" : LOCATION = LC1_C16;
":613" : LOCATION = LC3_C16;
"~613~1" : LOCATION = LC1_C19;
":622" : LOCATION = LC8_C23;
":631" : LOCATION = LC5_C23;
":640" : LOCATION = LC2_C23;
":649" : LOCATION = LC8_C22;
":658" : LOCATION = LC4_C22;
":667" : LOCATION = LC3_C22;
":676" : LOCATION = LC7_C3 ;
":685" : LOCATION = LC6_C3 ;
":694" : LOCATION = LC3_C3 ;
":703" : LOCATION = LC7_C14;
":802" : LOCATION = LC5_C19;
END;
INTERNAL_INFO "cnt4000"
BEGIN
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -