sub8b.fit

dds信号发生器

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 04/29/2006 17:49:34      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "sub8b"
BEGIN

    DEVICE = "EP1K10TC100-1";

    "suba0"                        : INPUT_PIN  = 38     ;
    "suba1"                        : INPUT_PIN  = 89     ;
    "suba2"                        : INPUT_PIN  = 90     ;
    "suba3"                        : INPUT_PIN  = 33     ;
    "suba4"                        : INPUT_PIN  = 29     ;
    "suba5"                        : INPUT_PIN  = 57     ;
    "suba6"                        : INPUT_PIN  = 31     ;
    "suba7"                        : INPUT_PIN  = 55     ;
    "subb0"                        : INPUT_PIN  = 40     ;
    "subb1"                        : INPUT_PIN  = 91     ;
    "subb2"                        : INPUT_PIN  = 39     ;
    "subb3"                        : INPUT_PIN  = 23     ;
    "subb4"                        : INPUT_PIN  = 56     ;
    "subb5"                        : INPUT_PIN  = 20     ;
    "subb6"                        : INPUT_PIN  = 58     ;
    "subn0"                        : OUTPUT_PIN = 14     ;
    "subn1"                        : OUTPUT_PIN = 13     ;
    "subn2"                        : OUTPUT_PIN = 15     ;
    "subn3"                        : OUTPUT_PIN = 22     ;
    "subn4"                        : OUTPUT_PIN = 19     ;
    "subn5"                        : OUTPUT_PIN = 21     ;
    "subn6"                        : OUTPUT_PIN = 98     ;
    "subn7"                        : OUTPUT_PIN = 97     ;
    "|LPM_ADD_SUB:24|addcore:adder|pcarry1" : LOCATION   = LC4_B16;
    "|LPM_ADD_SUB:24|addcore:adder|pcarry2" : LOCATION   = LC3_B16;
    "|LPM_ADD_SUB:24|addcore:adder|pcarry3" : LOCATION   = LC2_C23;
    "|LPM_ADD_SUB:24|addcore:adder|pcarry4" : LOCATION   = LC3_C23;
    "|LPM_ADD_SUB:24|addcore:adder|pcarry5" : LOCATION   = LC8_C23;
    "|LPM_ADD_SUB:24|addcore:adder|:147" : LOCATION   = LC2_B16;
    "|LPM_ADD_SUB:24|addcore:adder|:155" : LOCATION   = LC6_C23;
    "|LPM_ADD_SUB:24|addcore:adder|:156" : LOCATION   = LC1_B16;
    "|LPM_ADD_SUB:24|addcore:adder|:157" : LOCATION   = LC5_B16;
    "|LPM_ADD_SUB:24|addcore:adder|:158" : LOCATION   = LC5_C23;
    "|LPM_ADD_SUB:24|addcore:adder|:159" : LOCATION   = LC1_C23;
    "|LPM_ADD_SUB:24|addcore:adder|:160" : LOCATION   = LC4_C23;
    "|LPM_ADD_SUB:24|addcore:adder|:161" : LOCATION   = LC7_C23;

END;

INTERNAL_INFO "sub8b"
BEGIN
	DEVICE = EP1K10TC100-1;
    LC3_B16 : LORAX = "1:MSW2R1C15,V8C15,HHR14R2,PA1R2C22->LC2_C23,->LC5_C23|";
    LC2_B16 : LORAX = "1:MSW2R1C14,G14R1->OH2R1P14|";
    LC6_C23 : LORAX = "1:MSW5R2C22,V17C22->OV0C22P97|";
    LC1_B16 : LORAX = "1:MSW0R1C15,HHR19R1->OH0R1P13|";
    LC5_B16 : LORAX = "1:MSW4R1C15,HHR38R1->OH4R1P15|";
    LC5_C23 : LORAX = "1:MSW4R2C22,G85R2->OH4R2P22|";
    LC1_C23 : LORAX = "1:MSW0R2C23,HHR20R2->OH0R2P19|";
    LC4_C23 : LORAX = "1:MSW3R2C22,HHR7R2->OH3R2P21|";
    LC7_C23 : LORAX = "1:MSW6R2C23,V19C23->OV1C23P98|";
    OD2P38  : LORAX = "1:FB2|2:FH2R1,PA6R1C15->LC4_B16,->LC2_B16,->LC1_B16||";
    OD1P89  : LORAX = "1:FB1|2:FH1R1,PA20R1C15->LC4_B16,->LC1_B16||";
    OD4P90  : LORAX = "1:FB4|2:CH0R1,PA19R1C15->LC3_B16,->LC5_B16||";
    OV3C14P33 : LORAX = "1:V18C14,HHR40R2,PA9R2C22->LC2_C23,->LC5_C23|";
    OV2C18P29 : LORAX = "1:V14C18,HHR41R2,PA8R2C22->LC3_C23,->LC1_C23|";
    OH10R2P57 : LORAX = "1:G41R2,PA18R2C22->LC8_C23,->LC4_C23|";
    OV3C16P31 : LORAX = "1:V18C16,HHR31R2,PA4R2C22->LC6_C23,->LC7_C23|";
    OH14R2P55 : LORAX = "1:G44R2,PA6R2C22->LC6_C23|";
    OD3P40  : LORAX = "1:FB3|2:FH3R1,PA5R1C15->LC4_B16,->LC2_B16,->LC1_B16||";
    OD0P91  : LORAX = "1:FB0|2:FH0R1,PA0R1C15->LC4_B16,->LC1_B16||";
    OD5P39  : LORAX = "1:FB5|2:CH1R1,PA7R1C15->LC3_B16,->LC5_B16||";
    OH6R2P23 : LORAX = "1:G45R2,PA5R2C22->LC2_C23,->LC5_C23|";
    OH12R2P56 : LORAX = "1:G40R2,PA19R2C22->LC3_C23,->LC1_C23|";
    OH1R2P20 : LORAX = "1:G36R2,PA2R2C22->LC8_C23,->LC4_C23|";
    OH8R2P58 : LORAX = "1:G13R2,PA0R2C22->LC6_C23,->LC7_C23|";
	LC4_B16 : LORAX2 = "OD0P91, OD1P89, OD2P38, OD3P40";
	LC3_B16 : LORAX2 = "X, OD5P39, OD4P90, LC4_B16";
	LC2_C23 : LORAX2 = "X, OH6R2P23, OV3C14P33, LC3_B16";
	LC3_C23 : LORAX2 = "X, OH12R2P56, OV2C18P29, LC2_C23";
	LC8_C23 : LORAX2 = "X, OH10R2P57, OH1R2P20, LC3_C23";
	LC2_B16 : LORAX2 = "X, X, OD3P40, OD2P38";
	LC6_C23 : LORAX2 = "OH14R2P55, OV3C16P31, OH8R2P58, LC8_C23";
	LC1_B16 : LORAX2 = "OD1P89, OD0P91, OD2P38, OD3P40";
	LC5_B16 : LORAX2 = "X, OD4P90, OD5P39, LC4_B16";
	LC5_C23 : LORAX2 = "X, OH6R2P23, OV3C14P33, LC3_B16";
	LC1_C23 : LORAX2 = "X, OH12R2P56, OV2C18P29, LC2_C23";
	LC4_C23 : LORAX2 = "X, OH10R2P57, OH1R2P20, LC3_C23";
	LC7_C23 : LORAX2 = "X, OV3C16P31, OH8R2P58, LC8_C23";
END;