📄 adder26b.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.0 9/14/2000
-- Compiled: 05/02/2006 09:45:09
-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "adder26b"
BEGIN
DEVICE = "EP1K10TC144-1";
"A26B0" : INPUT_PIN = 56 ;
"A26B1" : INPUT_PIN = 124 ;
"A26B2" : INPUT_PIN = 125 ;
"A26B3" : INPUT_PIN = 128 ;
"A26B4" : INPUT_PIN = 131 ;
"A26B5" : INPUT_PIN = 141 ;
"A26B6" : INPUT_PIN = 43 ;
"A26B7" : INPUT_PIN = 46 ;
"A26B8" : INPUT_PIN = 51 ;
"A26B9" : INPUT_PIN = 121 ;
"A26B10" : INPUT_PIN = 73 ;
"A26B11" : INPUT_PIN = 72 ;
"A26B12" : INPUT_PIN = 114 ;
"A26B13" : INPUT_PIN = 7 ;
"A26B14" : INPUT_PIN = 97 ;
"A26B15" : INPUT_PIN = 113 ;
"A26B16" : INPUT_PIN = 116 ;
"A26B17" : INPUT_PIN = 81 ;
"A26B18" : INPUT_PIN = 79 ;
"A26B19" : INPUT_PIN = 33 ;
"A26B20" : INPUT_PIN = 36 ;
"A26B21" : INPUT_PIN = 78 ;
"A26B22" : INPUT_PIN = 138 ;
"A26B23" : INPUT_PIN = 86 ;
"A26B24" : INPUT_PIN = 136 ;
"A26B25" : INPUT_PIN = 21 ;
"A26B26" : INPUT_PIN = 60 ;
"A26B27" : INPUT_PIN = 59 ;
"A26B28" : INPUT_PIN = 64 ;
"A26B29" : INPUT_PIN = 109 ;
"B26B0" : INPUT_PIN = 54 ;
"B26B1" : INPUT_PIN = 126 ;
"B26B2" : INPUT_PIN = 55 ;
"B26B3" : INPUT_PIN = 132 ;
"B26B4" : INPUT_PIN = 130 ;
"B26B5" : INPUT_PIN = 48 ;
"B26B6" : INPUT_PIN = 142 ;
"B26B7" : INPUT_PIN = 133 ;
"B26B8" : INPUT_PIN = 49 ;
"B26B9" : INPUT_PIN = 118 ;
"B26B10" : INPUT_PIN = 112 ;
"B26B11" : INPUT_PIN = 11 ;
"B26B12" : INPUT_PIN = 67 ;
"B26B13" : INPUT_PIN = 8 ;
"B26B14" : INPUT_PIN = 102 ;
"B26B15" : INPUT_PIN = 98 ;
"B26B16" : INPUT_PIN = 70 ;
"B26B17" : INPUT_PIN = 83 ;
"B26B18" : INPUT_PIN = 140 ;
"B26B19" : INPUT_PIN = 80 ;
"B26B20" : INPUT_PIN = 44 ;
"B26B21" : INPUT_PIN = 38 ;
"B26B22" : INPUT_PIN = 23 ;
"B26B23" : INPUT_PIN = 137 ;
"B26B24" : INPUT_PIN = 135 ;
"B26B25" : INPUT_PIN = 87 ;
"B26B26" : INPUT_PIN = 110 ;
"B26B27" : INPUT_PIN = 69 ;
"B26B28" : INPUT_PIN = 120 ;
"B26B29" : INPUT_PIN = 111 ;
"S26B0" : OUTPUT_PIN = 42 ;
"S26B1" : OUTPUT_PIN = 41 ;
"S26B2" : OUTPUT_PIN = 14 ;
"S26B3" : OUTPUT_PIN = 13 ;
"S26B4" : OUTPUT_PIN = 39 ;
"S26B5" : OUTPUT_PIN = 144 ;
"S26B6" : OUTPUT_PIN = 143 ;
"S26B7" : OUTPUT_PIN = 9 ;
"S26B8" : OUTPUT_PIN = 37 ;
"S26B9" : OUTPUT_PIN = 117 ;
"S26B10" : OUTPUT_PIN = 96 ;
"S26B11" : OUTPUT_PIN = 119 ;
"S26B12" : OUTPUT_PIN = 95 ;
"S26B13" : OUTPUT_PIN = 100 ;
"S26B14" : OUTPUT_PIN = 63 ;
"S26B15" : OUTPUT_PIN = 122 ;
"S26B16" : OUTPUT_PIN = 62 ;
"S26B17" : OUTPUT_PIN = 30 ;
"S26B18" : OUTPUT_PIN = 29 ;
"S26B19" : OUTPUT_PIN = 27 ;
"S26B20" : OUTPUT_PIN = 26 ;
"S26B21" : OUTPUT_PIN = 32 ;
"S26B22" : OUTPUT_PIN = 19 ;
"S26B23" : OUTPUT_PIN = 17 ;
"S26B24" : OUTPUT_PIN = 18 ;
"S26B25" : OUTPUT_PIN = 92 ;
"S26B26" : OUTPUT_PIN = 91 ;
"S26B27" : OUTPUT_PIN = 90 ;
"S26B28" : OUTPUT_PIN = 88 ;
"S26B29" : OUTPUT_PIN = 68 ;
"|LPM_ADD_SUB:91|addcore:adder|pcarry1" : LOCATION = LC1_A20;
"|LPM_ADD_SUB:91|addcore:adder|pcarry2" : LOCATION = LC1_A21;
"|LPM_ADD_SUB:91|addcore:adder|pcarry3" : LOCATION = LC2_A21;
"|LPM_ADD_SUB:91|addcore:adder|pcarry4" : LOCATION = LC3_A21;
"|LPM_ADD_SUB:91|addcore:adder|pcarry5" : LOCATION = LC4_A23;
"|LPM_ADD_SUB:91|addcore:adder|pcarry6" : LOCATION = LC6_A23;
"|LPM_ADD_SUB:91|addcore:adder|pcarry7" : LOCATION = LC8_A23;
"|LPM_ADD_SUB:91|addcore:adder|pcarry8" : LOCATION = LC2_A23;
"|LPM_ADD_SUB:91|addcore:adder|pcarry9" : LOCATION = LC2_A5 ;
"|LPM_ADD_SUB:91|addcore:adder|pcarry10" : LOCATION = LC3_A8 ;
"|LPM_ADD_SUB:91|addcore:adder|pcarry11" : LOCATION = LC4_A8 ;
"|LPM_ADD_SUB:91|addcore:adder|pcarry12" : LOCATION = LC1_A8 ;
"|LPM_ADD_SUB:91|addcore:adder|pcarry13" : LOCATION = LC6_A12;
"|LPM_ADD_SUB:91|addcore:adder|pcarry14" : LOCATION = LC7_A12;
"|LPM_ADD_SUB:91|addcore:adder|pcarry15" : LOCATION = LC8_A12;
"|LPM_ADD_SUB:91|addcore:adder|pcarry16" : LOCATION = LC3_A12;
"|LPM_ADD_SUB:91|addcore:adder|pcarry17" : LOCATION = LC6_C23;
"|LPM_ADD_SUB:91|addcore:adder|pcarry18" : LOCATION = LC7_C23;
"|LPM_ADD_SUB:91|addcore:adder|pcarry19" : LOCATION = LC8_C23;
"|LPM_ADD_SUB:91|addcore:adder|pcarry20" : LOCATION = LC3_C23;
"|LPM_ADD_SUB:91|addcore:adder|pcarry21" : LOCATION = LC1_C22;
"|LPM_ADD_SUB:91|addcore:adder|pcarry22" : LOCATION = LC5_B21;
"|LPM_ADD_SUB:91|addcore:adder|pcarry23" : LOCATION = LC6_B21;
"|LPM_ADD_SUB:91|addcore:adder|pcarry24" : LOCATION = LC4_B21;
"|LPM_ADD_SUB:91|addcore:adder|pcarry25" : LOCATION = LC5_B6 ;
"|LPM_ADD_SUB:91|addcore:adder|pcarry26" : LOCATION = LC7_B6 ;
"|LPM_ADD_SUB:91|addcore:adder|pcarry27" : LOCATION = LC8_B6 ;
"|LPM_ADD_SUB:91|addcore:adder|pcarry28" : LOCATION = LC2_B6 ;
"|LPM_ADD_SUB:91|addcore:adder|:273" : LOCATION = LC3_A20;
"|LPM_ADD_SUB:91|addcore:adder|:304" : LOCATION = LC2_A20;
"|LPM_ADD_SUB:91|addcore:adder|:305" : LOCATION = LC8_A21;
"|LPM_ADD_SUB:91|addcore:adder|:306" : LOCATION = LC7_A21;
"|LPM_ADD_SUB:91|addcore:adder|:307" : LOCATION = LC4_A21;
"|LPM_ADD_SUB:91|addcore:adder|:308" : LOCATION = LC7_A23;
"|LPM_ADD_SUB:91|addcore:adder|:309" : LOCATION = LC1_A23;
"|LPM_ADD_SUB:91|addcore:adder|:310" : LOCATION = LC3_A23;
"|LPM_ADD_SUB:91|addcore:adder|:311" : LOCATION = LC5_A23;
"|LPM_ADD_SUB:91|addcore:adder|:312" : LOCATION = LC1_A5 ;
"|LPM_ADD_SUB:91|addcore:adder|:313" : LOCATION = LC7_A8 ;
"|LPM_ADD_SUB:91|addcore:adder|:314" : LOCATION = LC2_A8 ;
"|LPM_ADD_SUB:91|addcore:adder|:315" : LOCATION = LC8_A8 ;
"|LPM_ADD_SUB:91|addcore:adder|:316" : LOCATION = LC2_A12;
"|LPM_ADD_SUB:91|addcore:adder|:317" : LOCATION = LC5_A12;
"|LPM_ADD_SUB:91|addcore:adder|:318" : LOCATION = LC1_A12;
"|LPM_ADD_SUB:91|addcore:adder|:319" : LOCATION = LC4_A12;
"|LPM_ADD_SUB:91|addcore:adder|:320" : LOCATION = LC5_C23;
"|LPM_ADD_SUB:91|addcore:adder|:321" : LOCATION = LC4_C23;
"|LPM_ADD_SUB:91|addcore:adder|:322" : LOCATION = LC2_C23;
"|LPM_ADD_SUB:91|addcore:adder|:323" : LOCATION = LC1_C23;
"|LPM_ADD_SUB:91|addcore:adder|:324" : LOCATION = LC6_C22;
"|LPM_ADD_SUB:91|addcore:adder|:325" : LOCATION = LC3_B21;
"|LPM_ADD_SUB:91|addcore:adder|:326" : LOCATION = LC1_B21;
"|LPM_ADD_SUB:91|addcore:adder|:327" : LOCATION = LC2_B21;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -