⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 traffic.fit

📁 该程序是用一片HDPLD和若干外围电路实现的十字路口交通控制器,其中包含顶层图形文件和源文件以及仿真波形
💻 FIT
字号:
-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 05/13/2006 08:59:32      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "traffic"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk"                          : INPUT_PIN  = 1      ;
    "reset"                        : INPUT_PIN  = 28     ;
    "g1"                           : OUTPUT_PIN = 17     ;
    "g2"                           : OUTPUT_PIN = 21     ;
    "r1"                           : OUTPUT_PIN = 18     ;
    "r2"                           : OUTPUT_PIN = 22     ;
    "y1"                           : OUTPUT_PIN = 19     ;
    "y2"                           : OUTPUT_PIN = 23     ;
    "|COUNT05:3|:4"                : LOCATION   = LC2_B7 ;  -- |COUNT05:3|cnt2
    "|COUNT05:3|:5"                : LOCATION   = LC3_B7 ;  -- |COUNT05:3|cnt1
    "|COUNT05:3|:6"                : LOCATION   = LC7_B7 ;  -- |COUNT05:3|cnt0
    "|COUNT26:2|LPM_ADD_SUB:56|addcore:adder|:67" : LOCATION   = LC2_B9 ;
    "|COUNT26:2|:4"                : LOCATION   = LC5_B9 ;  -- |COUNT26:2|cnt4
    "|COUNT26:2|:5"                : LOCATION   = LC4_B9 ;  -- |COUNT26:2|cnt3
    "|COUNT26:2|:6"                : LOCATION   = LC6_B9 ;  -- |COUNT26:2|cnt2
    "|COUNT26:2|:7"                : LOCATION   = LC7_B9 ;  -- |COUNT26:2|cnt1
    "|COUNT26:2|:8"                : LOCATION   = LC5_B2 ;  -- |COUNT26:2|cnt0
    "|COUNT26:2|~22~1"             : LOCATION   = LC3_B9 ;
    "|COUNT26:2|:44"               : LOCATION   = LC1_B9 ;
    "|COUNT26:2|~103~1"            : LOCATION   = LC8_B9 ;
    "|COUNT30:4|LPM_ADD_SUB:56|addcore:adder|:67" : LOCATION   = LC6_B12;
    "|COUNT30:4|:4"                : LOCATION   = LC8_B12;  -- |COUNT30:4|cnt4
    "|COUNT30:4|:5"                : LOCATION   = LC7_B12;  -- |COUNT30:4|cnt3
    "|COUNT30:4|:6"                : LOCATION   = LC5_B12;  -- |COUNT30:4|cnt2
    "|COUNT30:4|:7"                : LOCATION   = LC3_B12;  -- |COUNT30:4|cnt1
    "|COUNT30:4|:8"                : LOCATION   = LC1_B12;  -- |COUNT30:4|cnt0
    "|COUNT30:4|:22"               : LOCATION   = LC2_B12;
    "|COUNT30:4|:44"               : LOCATION   = LC4_B12;
    "|TRAFFIC_CONTROL:1|state~1"   : LOCATION   = LC6_B2 ;
    "|TRAFFIC_CONTROL:1|state~2"   : LOCATION   = LC2_B2 ;
    "|TRAFFIC_CONTROL:1|state~3"   : LOCATION   = LC3_B2 ;
    "|TRAFFIC_CONTROL:1|state~4"   : LOCATION   = LC4_B2 ;
    "|TRAFFIC_CONTROL:1|:88"       : LOCATION   = LC4_B7 ;
    "|TRAFFIC_CONTROL:1|:90"       : LOCATION   = LC8_B7 ;
    "|TRAFFIC_CONTROL:1|:96"       : LOCATION   = LC6_B7 ;
    "|TRAFFIC_CONTROL:1|:98"       : LOCATION   = LC5_B7 ;
    "|TRAFFIC_CONTROL:1|:142"      : LOCATION   = LC1_B7 ;
    "|TRAFFIC_CONTROL:1|:174"      : LOCATION   = LC8_B2 ;
    "|TRAFFIC_CONTROL:1|:220"      : LOCATION   = LC1_B2 ;

END;

INTERNAL_INFO "traffic"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD4P1   : LORAX = "1:FB4->LC2_B7,->LC3_B7,->LC7_B7,->LC5_B9,->LC4_B9,->LC6_B9,->LC7_B9,->LC5_B2,->LC8_B12,->LC7_B12,->LC5_B12,->LC3_B12,->LC1_B12,->LC6_B2,->LC2_B2,->LC3_B2,->LC4_B2|";
    LC5_B2  : LORAX = "1:MSW4R1C1,HHL36R1,PA20R1C8->LC2_B9,->LC6_B9,->LC7_B9|";
    LC1_B9  : LORAX = "1:MSW0R1C8,HHL21R1,PA15R1C1->LC5_B2|";
    LC8_B9  : LORAX = "1:MSW7R1C8,HHL37R1,PA12R1C1->LC6_B2,->LC2_B2|";
    LC1_B12 : LORAX = "1:MSW0R1C11,HHL20R1,PA16R1C1->LC3_B2,->LC4_B2|";
    LC2_B12 : LORAX = "1:MSW1R1C11,HHL16R1,PA9R1C1->LC3_B2,->LC4_B2|";
    OH10R2P28 : LORAX = "1:G41R2,V10C16,G26R1,PA20R1C1->LC6_B2,->LC2_B2,->LC3_B2,->LC4_B2|";
    LC6_B2  : LORAX = "1:MSW6R1C0|2:HHL29R1,PA6R1C6->LC6_B7,->LC5_B7,->LC1_B7|,2:V20C0,HHL29R0->OH14R0P19||";
    LC2_B2  : LORAX = "1:MSW2R1C0|2:HHL3R1,PA19R1C8->LC1_B9|,2:V8C0,HHL3R0->OH10R0P17||";
    LC3_B2  : LORAX = "1:MSW3R1C0|2:HHL9R1,PA13R1C6->LC4_B7,->LC8_B7,->LC1_B7|,2:G21R1->OH11R1P23||";
    LC4_B2  : LORAX = "1:MSW0R1C0,HHL22R1->OH8R1P21|2:PA2R1C11->LC3_B12,->LC1_B12,->LC4_B12||";
    LC4_B7  : LORAX = "1:MSW3R1C7,HHL13R1,PA2R1C1->LC3_B2|";
    LC8_B7  : LORAX = "1:MSW7R1C6,HHL46R1,PA3R1C1->LC2_B2|";
    LC6_B7  : LORAX = "1:MSW5R1C6,HHL34R1,PA1R1C1->LC4_B2|";
    LC5_B7  : LORAX = "1:MSW4R1C6,HHL41R1,PA8R1C1->LC6_B2|";
    LC8_B2  : LORAX = "1:MSW4R1C0,V12C0,HHL41R0->OH12R0P18|";
    LC1_B2  : LORAX = "1:MSW1R1C0,HHL8R1->OH9R1P22|";
	LC2_B7  : LORAX2 = "LC2_B7, LC3_B7, LC7_B7, LC1_B7";
	LC3_B7  : LORAX2 = "LC2_B7, LC3_B7, LC1_B7, LC7_B7";
	LC7_B7  : LORAX2 = "LC2_B7, LC3_B7, LC1_B7, LC7_B7";
	LC2_B9  : LORAX2 = "X, LC6_B9, LC7_B9, LC5_B2";
	LC5_B9  : LORAX2 = "LC2_B9, LC5_B9, LC1_B9, LC4_B9";
	LC4_B9  : LORAX2 = "X, LC2_B9, LC1_B9, LC4_B9";
	LC6_B9  : LORAX2 = "LC6_B9, LC5_B2, LC7_B9, LC1_B9";
	LC7_B9  : LORAX2 = "X, LC7_B9, LC5_B2, LC1_B9";
	LC5_B2  : LORAX2 = "X, X, LC5_B2, LC1_B9";
	LC3_B9  : LORAX2 = "X, X, LC5_B9, LC4_B9";
	LC1_B9  : LORAX2 = "LC6_B9, LC7_B9, LC2_B2, LC3_B9";
	LC8_B9  : LORAX2 = "LC7_B9, LC6_B9, LC5_B9, LC4_B9";
	LC6_B12 : LORAX2 = "X, LC1_B12, LC5_B12, LC3_B12";
	LC8_B12 : LORAX2 = "LC6_B12, LC8_B12, LC4_B12, LC7_B12";
	LC7_B12 : LORAX2 = "X, LC6_B12, LC4_B12, LC7_B12";
	LC5_B12 : LORAX2 = "LC1_B12, LC4_B12, LC5_B12, LC3_B12";
	LC3_B12 : LORAX2 = "LC1_B12, LC4_B2, LC3_B12, LC2_B12";
	LC1_B12 : LORAX2 = "X, LC1_B12, LC4_B2, LC2_B12";
	LC2_B12 : LORAX2 = "LC8_B12, LC7_B12, LC3_B12, LC5_B12";
	LC4_B12 : LORAX2 = "X, X, LC4_B2, LC2_B12";
	LC6_B2  : LORAX2 = "LC8_B9, LC5_B2, LC5_B7, LC2_B2";
	LC2_B2  : LORAX2 = "LC8_B9, LC5_B2, LC8_B7, LC2_B2";
	LC3_B2  : LORAX2 = "LC1_B12, LC4_B7, LC4_B2, LC2_B12";
	LC4_B2  : LORAX2 = "LC1_B12, LC6_B7, LC4_B2, LC2_B12";
	LC4_B7  : LORAX2 = "LC2_B7, LC3_B7, LC7_B7, LC3_B2";
	LC8_B7  : LORAX2 = "LC2_B7, LC3_B7, LC7_B7, LC3_B2";
	LC6_B7  : LORAX2 = "LC2_B7, LC3_B7, LC7_B7, LC6_B2";
	LC5_B7  : LORAX2 = "LC2_B7, LC3_B7, LC7_B7, LC6_B2";
	LC1_B7  : LORAX2 = "X, X, LC3_B2, LC6_B2";
	LC8_B2  : LORAX2 = "X, X, LC4_B2, LC3_B2";
	LC1_B2  : LORAX2 = "X, X, LC2_B2, LC6_B2";
END;

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -