bahe.asm.talkback.xml

设计四 拔河游戏机 1、 设计一个能进行拔河游戏的电路。 2、 电路使用15个(或9个)发光二极管

<!--
This XML file (created on Mon May 22 23:53:45 2006) contains limited information
from the compilation of logic designs using Quartus II software (BUT NOT THE
LOGIC DESIGN FILES) that will be transmitted to Altera Corporation through
operation of the "TalkBack" feature.  To enable/disable this feature, run
qtb_install.exe located in your quartus/bin folder.  For more information, go
to www.altera.com/products/software/download/dnl-download_license.html
-->
<talkback>
<ver>5.1</ver>
<schema>quartus_version_5.1_build_216.xsd</schema><license>
	<nic_id>000c76594cd8</nic_id>
	<cdrive_id>7886784f</cdrive_id>
</license>
<tool>
	<name>Quartus II</name>
	<version>5.1</version>
	<build>Build 216</build>
	<service_pack_label>2</service_pack_label>
	<binary_type>32</binary_type>
	<module>quartus_asm.exe</module>
	<edition>Web Edition</edition>
	<eval>Eval</eval>
	<compilation_end_time>Mon May 22 23:53:45 2006</compilation_end_time>
</tool>
<machine>
	<os>Windows XP</os>
	<cpu>
		<proc_count>1</proc_count>
		<cpu_freq units="MHz">2019</cpu_freq>
	</cpu>
	<ram units="MB">224</ram>
</machine>
<top_file>F:/EDA/拔河游戏机/bahe/bahe</top_file>
<compilation_summary>
	<flow_status>Successful - Mon May 22 23:53:44 2006</flow_status>
	<quartus_ii_version>5.1 Build 216 03/06/2006 SP 2 SJ Web Edition</quartus_ii_version>
	<revision_name>bahe</revision_name>
	<top_level_entity_name>bahe</top_level_entity_name>
	<family>FLEX10K</family>
	<met_timing_requirements>N/A</met_timing_requirements>
	<total_logic_elements>160 / 576 ( 28 % )</total_logic_elements>
	<total_pins>28 / 59 ( 47 % )</total_pins>
	<total_memory_bits>0 / 6,144 ( 0 % )</total_memory_bits>
	<device>EPF10K10LC84-3</device>
	<timing_models>Final</timing_models>
</compilation_summary>
<compile_id>94FF1E37</compile_id>
<mep_data>
	<command_line>quartus_asm --read_settings_files=off --write_settings_files=off bahe -c bahe</command_line>
</mep_data>
<software_data>
	<smart_recompile>off</smart_recompile>
</software_data>
<messages>
	<warning>Warning: Can&apos;t generate programming files because you are currently using the Quartus II software in Evaluation Mode</warning>
	<info>Info: Quartus II Assembler was successful. 0 errors, 1 warning</info>
	<info>Info: Elapsed time: 00:00:04</info>
	<info>Info: Processing ended: Mon May 22 23:53:44 2006</info>
	<info>Info: Command: quartus_asm --read_settings_files=off --write_settings_files=off bahe -c bahe</info>
	<info>Info: Running Quartus II Assembler</info>
</messages>
<assembler_settings>
	<row>
		<option>Use smart compilation</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate Serial Vector Format File (.svf) for Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate a JEDEC STAPL Format File (.jam) for Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate an uncompressed Jam STAPL Byte Code 2.0 File (.jbc) for Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate a compressed Jam STAPL Byte Code 2.0 File (.jbc) for Target Device</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
	<row>
		<option>Compression mode</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Clock source for configuration device</option>
		<setting>Internal</setting>
		<default_value>Internal</default_value>
	</row>
	<row>
		<option>Clock frequency of the configuration device</option>
		<setting units="MHz">10</setting>
		<default_value units="MHz">10</default_value>
	</row>
	<row>
		<option>Divide clock frequency by</option>
		<setting>1</setting>
		<default_value>1</default_value>
	</row>
	<row>
		<option>Low-voltage mode</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
	<row>
		<option>JTAG user code for target device</option>
		<setting>7F</setting>
		<default_value>7F</default_value>
	</row>
	<row>
		<option>Configuration device</option>
		<setting>Auto</setting>
		<default_value>Auto</default_value>
	</row>
	<row>
		<option>JTAG user code for configuration device</option>
		<setting>Ffffffff</setting>
		<default_value>Ffffffff</default_value>
	</row>
	<row>
		<option>Configuration device auto user code</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate Tabular Text File (.ttf) For Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate Raw Binary File (.rbf) For Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate Hexadecimal (Intel-Format) Output File (.hexout) for Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Hexadecimal Output File start address</option>
		<setting>0</setting>
		<default_value>0</default_value>
	</row>
	<row>
		<option>Hexadecimal Output File count direction</option>
		<setting>Up</setting>
		<default_value>Up</default_value>
	</row>
	<row>
		<option>Release clears before tri-states</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Auto-restart configuration after error</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
</assembler_settings>
</talkback>