📄 sel3.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.0 9/14/2000
-- Compiled: 05/20/2004 09:54:57
-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "sel3"
BEGIN
DEVICE = "EP1K10TC100-1";
"clk1" : INPUT_PIN = 39 ;
"in10" : INPUT_PIN = 19 ;
"in11" : INPUT_PIN = 28 ;
"in12" : INPUT_PIN = 27 ;
"in13" : INPUT_PIN = 89 ;
"in20" : INPUT_PIN = 23 ;
"in21" : INPUT_PIN = 48 ;
"in22" : INPUT_PIN = 93 ;
"in23" : INPUT_PIN = 82 ;
"in30" : INPUT_PIN = 56 ;
"in31" : INPUT_PIN = 22 ;
"in32" : INPUT_PIN = 94 ;
"in33" : INPUT_PIN = 91 ;
"in40" : INPUT_PIN = 20 ;
"in41" : INPUT_PIN = 99 ;
"in42" : INPUT_PIN = 98 ;
"in43" : INPUT_PIN = 77 ;
"in50" : INPUT_PIN = 46 ;
"in51" : INPUT_PIN = 29 ;
"in52" : INPUT_PIN = 97 ;
"in53" : INPUT_PIN = 55 ;
"in60" : INPUT_PIN = 26 ;
"in61" : INPUT_PIN = 58 ;
"in62" : INPUT_PIN = 31 ;
"in63" : INPUT_PIN = 40 ;
"in70" : INPUT_PIN = 79 ;
"in71" : INPUT_PIN = 34 ;
"in72" : INPUT_PIN = 33 ;
"in73" : INPUT_PIN = 30 ;
"in80" : INPUT_PIN = 90 ;
"in81" : INPUT_PIN = 49 ;
"in82" : INPUT_PIN = 21 ;
"in83" : INPUT_PIN = 38 ;
"a" : OUTPUT_PIN = 45 ;
"b" : OUTPUT_PIN = 57 ;
"c" : OUTPUT_PIN = 63 ;
"d" : OUTPUT_PIN = 87 ;
"e" : OUTPUT_PIN = 86 ;
"f" : OUTPUT_PIN = 43 ;
"g" : OUTPUT_PIN = 69 ;
"ms1" : OUTPUT_PIN = 8 ;
"ms2" : OUTPUT_PIN = 7 ;
"ms3" : OUTPUT_PIN = 10 ;
"ms4" : OUTPUT_PIN = 70 ;
"ms5" : OUTPUT_PIN = 6 ;
"ms6" : OUTPUT_PIN = 5 ;
"ms7" : OUTPUT_PIN = 71 ;
"ms8" : OUTPUT_PIN = 9 ;
"p" : OUTPUT_PIN = 81 ;
":54" : LOCATION = LC6_A13; -- flag13
":55" : LOCATION = LC2_A15; -- flag12
":56" : LOCATION = LC1_A15; -- flag11
":57" : LOCATION = LC5_A15; -- flag10
":62" : LOCATION = LC7_A24;
":80" : LOCATION = LC5_A24;
":85" : LOCATION = LC7_A13;
":95" : LOCATION = LC3_A24;
":100" : LOCATION = LC4_A24;
":110" : LOCATION = LC8_A13;
":115" : LOCATION = LC3_A15;
":125" : LOCATION = LC3_A13;
":130" : LOCATION = LC8_A24;
":140" : LOCATION = LC2_A13;
":145" : LOCATION = LC5_A13;
":155" : LOCATION = LC1_A24;
":160" : LOCATION = LC6_A15;
":170" : LOCATION = LC1_A13;
":175" : LOCATION = LC4_A13;
":185" : LOCATION = LC6_A24;
":224" : LOCATION = LC2_A24;
"~224~1" : LOCATION = LC3_C4 ;
":262" : LOCATION = LC4_C6 ;
"~262~1" : LOCATION = LC1_C6 ;
"~262~2" : LOCATION = LC2_C6 ;
"~262~3" : LOCATION = LC3_C6 ;
"~262~4" : LOCATION = LC5_C6 ;
"~262~5" : LOCATION = LC6_C6 ;
":263" : LOCATION = LC5_C20;
"~263~1" : LOCATION = LC3_C20;
"~263~2" : LOCATION = LC4_C20;
"~263~3" : LOCATION = LC6_C20;
"~263~4" : LOCATION = LC2_C24;
"~263~5" : LOCATION = LC8_C15;
":264" : LOCATION = LC6_C5 ;
"~264~1" : LOCATION = LC4_C18;
"~264~2" : LOCATION = LC1_C17;
"~264~3" : LOCATION = LC1_C5 ;
"~264~4" : LOCATION = LC2_C5 ;
"~264~5" : LOCATION = LC2_C13;
":265" : LOCATION = LC6_C2 ;
"~265~1" : LOCATION = LC4_C21;
"~265~2" : LOCATION = LC2_C4 ;
"~265~3" : LOCATION = LC8_C4 ;
"~265~4" : LOCATION = LC1_C2 ;
"~265~5" : LOCATION = LC2_C2 ;
":266" : LOCATION = LC7_C6 ; -- temp3
":267" : LOCATION = LC6_C12; -- temp2
":268" : LOCATION = LC7_C22; -- temp1
":269" : LOCATION = LC4_C2 ; -- temp0
"~278~1" : LOCATION = LC1_C16;
"~278~2" : LOCATION = LC4_C14;
"~278~3" : LOCATION = LC5_C14;
"~278~4" : LOCATION = LC2_C14;
"~278~5" : LOCATION = LC5_C16;
"~278~6" : LOCATION = LC1_C15;
"~278~7" : LOCATION = LC1_C19;
"~278~8" : LOCATION = LC6_C21;
"~278~9" : LOCATION = LC7_C21;
"~278~10" : LOCATION = LC3_C23;
"~278~11" : LOCATION = LC4_C15;
"~278~12" : LOCATION = LC5_C15;
"~278~13" : LOCATION = LC6_C15;
":331" : LOCATION = LC4_C19;
"~331~1" : LOCATION = LC5_C21;
"~331~2" : LOCATION = LC6_C16;
"~331~3" : LOCATION = LC5_C17;
"~331~4" : LOCATION = LC8_C16;
"~331~5" : LOCATION = LC3_C16;
"~331~6" : LOCATION = LC3_C14;
"~331~7" : LOCATION = LC6_C22;
"~331~8" : LOCATION = LC2_C19;
"~331~9" : LOCATION = LC5_C19;
"~331~10" : LOCATION = LC6_C19;
"~331~11" : LOCATION = LC7_C23;
"~331~12" : LOCATION = LC7_C19;
":384" : LOCATION = LC2_C17;
"~384~1" : LOCATION = LC2_C23;
"~384~2" : LOCATION = LC6_C17;
"~384~3" : LOCATION = LC3_C12;
"~384~4" : LOCATION = LC6_C24;
"~384~5" : LOCATION = LC8_C14;
"~384~6" : LOCATION = LC7_C17;
"~384~7" : LOCATION = LC3_C15;
"~384~8" : LOCATION = LC2_C16;
"~384~9" : LOCATION = LC4_C16;
"~384~10" : LOCATION = LC3_C21;
"~384~11" : LOCATION = LC7_C16;
":437" : LOCATION = LC5_C24;
"~437~1" : LOCATION = LC7_C14;
"~437~2" : LOCATION = LC7_C20;
"~437~3" : LOCATION = LC1_C20;
"~437~4" : LOCATION = LC1_C24;
"~437~5" : LOCATION = LC3_C24;
"~437~6" : LOCATION = LC7_C15;
"~437~7" : LOCATION = LC4_C24;
"~437~8" : LOCATION = LC7_C24;
"~437~9" : LOCATION = LC8_C24;
":490" : LOCATION = LC1_C12;
"~490~1" : LOCATION = LC8_C23;
"~490~2" : LOCATION = LC2_C12;
"~490~3" : LOCATION = LC4_C12;
"~490~4" : LOCATION = LC6_C14;
"~490~5" : LOCATION = LC5_C12;
"~490~6" : LOCATION = LC7_C12;
"~490~7" : LOCATION = LC3_C17;
"~490~8" : LOCATION = LC7_C18;
"~490~9" : LOCATION = LC8_C18;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -