📄 sel.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.2 07/10/2002
-- Compiled: 03/15/2006 08:53:05
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "sel"
BEGIN
DEVICE = "EP1K100QC208-3";
"clk1" : INPUT_PIN = 79 ;
"in10" : INPUT_PIN = 207 ;
"in11" : INPUT_PIN = 62 ;
"in12" : INPUT_PIN = 191 ;
"in13" : INPUT_PIN = 58 ;
"in20" : INPUT_PIN = 197 ;
"in21" : INPUT_PIN = 200 ;
"in22" : INPUT_PIN = 193 ;
"in23" : INPUT_PIN = 202 ;
"in30" : INPUT_PIN = 135 ;
"in31" : INPUT_PIN = 195 ;
"in32" : INPUT_PIN = 199 ;
"in33" : INPUT_PIN = 57 ;
"in40" : INPUT_PIN = 75 ;
"in41" : INPUT_PIN = 67 ;
"in42" : INPUT_PIN = 190 ;
"in43" : INPUT_PIN = 192 ;
"in50" : INPUT_PIN = 65 ;
"in51" : INPUT_PIN = 196 ;
"in52" : INPUT_PIN = 186 ;
"in53" : INPUT_PIN = 182 ;
"in60" : INPUT_PIN = 56 ;
"in61" : INPUT_PIN = 60 ;
"in62" : INPUT_PIN = 183 ;
"in63" : INPUT_PIN = 73 ;
"in70" : INPUT_PIN = 64 ;
"in71" : INPUT_PIN = 134 ;
"in72" : INPUT_PIN = 184 ;
"in73" : INPUT_PIN = 80 ;
"in80" : INPUT_PIN = 187 ;
"in81" : INPUT_PIN = 53 ;
"in82" : INPUT_PIN = 78 ;
"in83" : INPUT_PIN = 133 ;
"a" : OUTPUT_PIN = 206 ;
"b" : OUTPUT_PIN = 17 ;
"c" : OUTPUT_PIN = 15 ;
"d" : OUTPUT_PIN = 16 ;
"e" : OUTPUT_PIN = 71 ;
"f" : OUTPUT_PIN = 204 ;
"g" : OUTPUT_PIN = 19 ;
"ms1" : OUTPUT_PIN = 88 ;
"ms2" : OUTPUT_PIN = 174 ;
"ms3" : OUTPUT_PIN = 170 ;
"ms4" : OUTPUT_PIN = 169 ;
"ms5" : OUTPUT_PIN = 87 ;
"ms6" : OUTPUT_PIN = 175 ;
"ms7" : OUTPUT_PIN = 168 ;
"ms8" : OUTPUT_PIN = 89 ;
"p" : OUTPUT_PIN = 18 ;
":54" : LOCATION = LC1_D17; -- flag13
":55" : LOCATION = LC5_D20; -- flag12
":56" : LOCATION = LC7_D20; -- flag11
":57" : LOCATION = LC6_D20; -- flag10
":62" : LOCATION = LC6_D17;
":80" : LOCATION = LC2_D20;
":85" : LOCATION = LC6_D21;
":95" : LOCATION = LC5_D21;
":100" : LOCATION = LC4_D21;
":110" : LOCATION = LC1_D20;
":115" : LOCATION = LC4_D17;
":125" : LOCATION = LC5_D17;
":130" : LOCATION = LC3_D21;
":140" : LOCATION = LC1_D21;
":145" : LOCATION = LC7_D21;
":155" : LOCATION = LC2_D21;
":160" : LOCATION = LC3_D17;
":170" : LOCATION = LC2_D17;
":175" : LOCATION = LC7_D17;
":185" : LOCATION = LC8_D17;
":224" : LOCATION = LC8_D21;
":262" : LOCATION = LC3_D36;
"~262~1" : LOCATION = LC1_D36;
"~262~2" : LOCATION = LC4_D38;
"~262~3" : LOCATION = LC1_D33;
"~262~4" : LOCATION = LC2_D36;
"~262~5" : LOCATION = LC5_D36;
":263" : LOCATION = LC4_D51;
"~263~1" : LOCATION = LC1_D51;
"~263~2" : LOCATION = LC2_D51;
"~263~3" : LOCATION = LC3_D51;
"~263~4" : LOCATION = LC5_D51;
"~263~5" : LOCATION = LC5_D47;
":264" : LOCATION = LC2_D48;
"~264~1" : LOCATION = LC1_D48;
"~264~2" : LOCATION = LC4_D48;
"~264~3" : LOCATION = LC7_D48;
"~264~4" : LOCATION = LC8_D48;
"~264~5" : LOCATION = LC3_D31;
":265" : LOCATION = LC3_D43;
"~265~1" : LOCATION = LC2_D38;
"~265~2" : LOCATION = LC2_D33;
"~265~3" : LOCATION = LC7_D33;
"~265~4" : LOCATION = LC4_D43;
"~265~5" : LOCATION = LC5_D43;
":266" : LOCATION = LC6_D48; -- temp3
":267" : LOCATION = LC1_D32; -- temp2
":268" : LOCATION = LC3_D48; -- temp1
":269" : LOCATION = LC2_D34; -- temp0
"~278~1" : LOCATION = LC4_D40;
"~278~2" : LOCATION = LC6_D49;
"~278~3" : LOCATION = LC7_D49;
"~278~4" : LOCATION = LC3_D49;
"~278~5" : LOCATION = LC3_D37;
"~278~6" : LOCATION = LC2_D30;
"~278~7" : LOCATION = LC6_D46;
"~278~8" : LOCATION = LC8_D42;
"~278~9" : LOCATION = LC6_D42;
"~278~10" : LOCATION = LC4_D30;
"~278~11" : LOCATION = LC5_D30;
"~278~12" : LOCATION = LC6_D27;
"~278~13" : LOCATION = LC8_D30;
":331" : LOCATION = LC1_D45;
"~331~1" : LOCATION = LC6_D37;
"~331~2" : LOCATION = LC1_D49;
"~331~3" : LOCATION = LC2_D49;
"~331~4" : LOCATION = LC4_D49;
"~331~5" : LOCATION = LC8_D49;
"~331~6" : LOCATION = LC1_D29;
"~331~7" : LOCATION = LC3_D29;
"~331~8" : LOCATION = LC1_D43;
"~331~9" : LOCATION = LC7_D42;
"~331~10" : LOCATION = LC7_D29;
"~331~11" : LOCATION = LC6_D29;
"~331~12" : LOCATION = LC2_D29;
":384" : LOCATION = LC8_D35;
"~384~1" : LOCATION = LC3_D47;
"~384~2" : LOCATION = LC1_D42;
"~384~3" : LOCATION = LC4_D35;
"~384~4" : LOCATION = LC5_D35;
"~384~5" : LOCATION = LC6_D35;
"~384~6" : LOCATION = LC7_D35;
"~384~7" : LOCATION = LC5_D40;
"~384~8" : LOCATION = LC3_D41;
"~384~9" : LOCATION = LC5_D38;
"~384~10" : LOCATION = LC7_D40;
"~384~11" : LOCATION = LC6_D40;
":437" : LOCATION = LC4_D47;
"~437~1" : LOCATION = LC6_D51;
"~437~2" : LOCATION = LC7_D51;
"~437~3" : LOCATION = LC8_D51;
"~437~4" : LOCATION = LC1_D47;
"~437~5" : LOCATION = LC2_D47;
"~437~6" : LOCATION = LC2_D40;
"~437~7" : LOCATION = LC6_D47;
"~437~8" : LOCATION = LC7_D47;
"~437~9" : LOCATION = LC8_D47;
":490" : LOCATION = LC8_D41;
"~490~1" : LOCATION = LC8_D29;
"~490~2" : LOCATION = LC6_D43;
"~490~3" : LOCATION = LC1_D30;
"~490~4" : LOCATION = LC7_D43;
"~490~5" : LOCATION = LC8_D43;
"~490~6" : LOCATION = LC2_D43;
"~490~7" : LOCATION = LC3_D40;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -