📄 taxi.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.2 07/10/2002
-- Compiled: 04/06/2006 19:01:32
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "taxi"
BEGIN
DEVICE = "EP1K100QC208-3";
MIGRATION_DEVICE = "EP1K100QC208";
"CLK" : INPUT_PIN = 183 ;
"flag" : INPUT_PIN = 94 ;
"reset" : INPUT_PIN = 95 ;
"a" : OUTPUT_PIN = 195 ;
"a1" : OUTPUT_PIN = 175 ;
"b" : OUTPUT_PIN = 196 ;
"b1" : OUTPUT_PIN = 176 ;
"c" : OUTPUT_PIN = 197 ;
"c1" : OUTPUT_PIN = 177 ;
"d" : OUTPUT_PIN = 198 ;
"d1" : OUTPUT_PIN = 179 ;
"e" : OUTPUT_PIN = 199 ;
"e1" : OUTPUT_PIN = 180 ;
"f" : OUTPUT_PIN = 200 ;
"f1" : OUTPUT_PIN = 186 ;
"g" : OUTPUT_PIN = 202 ;
"g1" : OUTPUT_PIN = 187 ;
"ifw" : OUTPUT_PIN = 116 ;
"ms1" : OUTPUT_PIN = 190 ;
"ms2" : OUTPUT_PIN = 191 ;
"ms3" : OUTPUT_PIN = 192 ;
"ms4" : OUTPUT_PIN = 193 ;
"ms5" : OUTPUT_PIN = 170 ;
"ms6" : OUTPUT_PIN = 172 ;
"ms7" : OUTPUT_PIN = 173 ;
"ms8" : OUTPUT_PIN = 174 ;
"p" : OUTPUT_PIN = 203 ;
"|FEN:135|LPM_ADD_SUB:195|addcore:adder|:127" : LOCATION = LC2_C25;
"|FEN:135|LPM_ADD_SUB:195|addcore:adder|:135" : LOCATION = LC2_C40;
"|FEN:135|LPM_ADD_SUB:195|addcore:adder|:139" : LOCATION = LC3_C40;
"|FEN:135|LPM_ADD_SUB:195|addcore:adder|:155" : LOCATION = LC2_C39;
"|FEN:135|LPM_ADD_SUB:195|addcore:adder|:163" : LOCATION = LC3_C39;
"|FEN:135|LPM_ADD_SUB:195|addcore:adder|:167" : LOCATION = LC3_C42;
"|FEN:135|LPM_ADD_SUB:195|addcore:adder|:171" : LOCATION = LC6_C42;
"|FEN:135|LPM_ADD_SUB:195|addcore:adder|:179" : LOCATION = LC2_C42;
"|FEN:135|LPM_ADD_SUB:195|addcore:adder|:183" : LOCATION = LC8_C25;
"|FEN:135|LPM_ADD_SUB:195|addcore:adder|:191" : LOCATION = LC4_C24;
"|FEN:135|LPM_ADD_SUB:195|addcore:adder|:195" : LOCATION = LC7_C24;
"|FEN:135|LPM_ADD_SUB:534|addcore:adder|:103" : LOCATION = LC3_H39;
"|FEN:135|LPM_ADD_SUB:534|addcore:adder|:111" : LOCATION = LC1_H39;
"|FEN:135|LPM_ADD_SUB:534|addcore:adder|:123" : LOCATION = LC5_H51;
"|FEN:135|LPM_ADD_SUB:534|addcore:adder|:131" : LOCATION = LC3_H51;
"|FEN:135|LPM_ADD_SUB:534|addcore:adder|:135" : LOCATION = LC1_H51;
"|FEN:135|LPM_ADD_SUB:534|addcore:adder|:143" : LOCATION = LC6_H28;
"|FEN:135|LPM_ADD_SUB:534|addcore:adder|:147" : LOCATION = LC4_H28;
"|FEN:135|:4" : LOCATION = LC6_C25; -- |FEN:135|b
"|FEN:135|:5" : LOCATION = LC6_H37; -- |FEN:135|a
"|FEN:135|:6" : LOCATION = LC8_C24; -- |FEN:135|cnt20
"|FEN:135|:7" : LOCATION = LC6_C24; -- |FEN:135|cnt19
"|FEN:135|:8" : LOCATION = LC5_C24; -- |FEN:135|cnt18
"|FEN:135|:9" : LOCATION = LC3_C24; -- |FEN:135|cnt17
"|FEN:135|:10" : LOCATION = LC3_C25; -- |FEN:135|cnt16
"|FEN:135|:11" : LOCATION = LC4_C25; -- |FEN:135|cnt15
"|FEN:135|:12" : LOCATION = LC7_C42; -- |FEN:135|cnt14
"|FEN:135|:13" : LOCATION = LC5_C42; -- |FEN:135|cnt13
"|FEN:135|:14" : LOCATION = LC4_C42; -- |FEN:135|cnt12
"|FEN:135|:15" : LOCATION = LC1_C42; -- |FEN:135|cnt11
"|FEN:135|:16" : LOCATION = LC4_C39; -- |FEN:135|cnt10
"|FEN:135|:17" : LOCATION = LC5_C39; -- |FEN:135|cnt9
"|FEN:135|:18" : LOCATION = LC8_C39; -- |FEN:135|cnt8
"|FEN:135|:19" : LOCATION = LC7_C39; -- |FEN:135|cnt7
"|FEN:135|:20" : LOCATION = LC7_C40; -- |FEN:135|cnt6
"|FEN:135|:21" : LOCATION = LC8_C40; -- |FEN:135|cnt5
"|FEN:135|:22" : LOCATION = LC6_C40; -- |FEN:135|cnt4
"|FEN:135|:23" : LOCATION = LC4_C40; -- |FEN:135|cnt3
"|FEN:135|:24" : LOCATION = LC5_C40; -- |FEN:135|cnt2
"|FEN:135|:25" : LOCATION = LC7_C25; -- |FEN:135|cnt1
"|FEN:135|:26" : LOCATION = LC5_C25; -- |FEN:135|cnt0
"|FEN:135|:50" : LOCATION = LC2_C24;
"|FEN:135|~50~1" : LOCATION = LC1_C24;
"|FEN:135|:77" : LOCATION = LC1_C39;
"|FEN:135|~77~1" : LOCATION = LC8_C42;
"|FEN:135|~102~1" : LOCATION = LC6_C39;
"|FEN:135|:120" : LOCATION = LC1_C40;
"|FEN:135|:399" : LOCATION = LC5_H28; -- |FEN:135|cnt114
"|FEN:135|:400" : LOCATION = LC8_H28; -- |FEN:135|cnt113
"|FEN:135|:401" : LOCATION = LC7_H28; -- |FEN:135|cnt112
"|FEN:135|:402" : LOCATION = LC2_H28; -- |FEN:135|cnt111
"|FEN:135|:403" : LOCATION = LC3_H28; -- |FEN:135|cnt110
"|FEN:135|:404" : LOCATION = LC3_H37; -- |FEN:135|cnt19~147
"|FEN:135|:405" : LOCATION = LC4_H51; -- |FEN:135|cnt18~147
"|FEN:135|:406" : LOCATION = LC8_H51; -- |FEN:135|cnt17~147
"|FEN:135|:407" : LOCATION = LC7_H51; -- |FEN:135|cnt16~147
"|FEN:135|:408" : LOCATION = LC6_H51; -- |FEN:135|cnt15~147
"|FEN:135|:409" : LOCATION = LC8_H39; -- |FEN:135|cnt14~147
"|FEN:135|:410" : LOCATION = LC6_H39; -- |FEN:135|cnt13~147
"|FEN:135|:411" : LOCATION = LC7_H39; -- |FEN:135|cnt12~147
"|FEN:135|:412" : LOCATION = LC5_H39; -- |FEN:135|cnt11~147
"|FEN:135|:413" : LOCATION = LC4_H39; -- |FEN:135|cnt10~147
"|FEN:135|:431" : LOCATION = LC1_H28;
"|FEN:135|:446" : LOCATION = LC1_H37;
"|FEN:135|~446~1" : LOCATION = LC2_H37;
"|FEN:135|~458~1" : LOCATION = LC2_H51;
"|FEN:135|:481" : LOCATION = LC2_H39;
"|ntaxi:39|lpm_add_sub:1169|addcore:adder|:67" : LOCATION = LC4_H32;
"|ntaxi:39|lpm_add_sub:1169|addcore:adder|:71" : LOCATION = LC5_H32;
"|ntaxi:39|lpm_add_sub:1169|addcore:adder|:75" : LOCATION = LC2_H32;
"|ntaxi:39|lpm_add_sub:1169|addcore:adder|:79" : LOCATION = LC6_H42;
"|ntaxi:39|lpm_add_sub:1170|addcore:adder|:55" : LOCATION = LC1_F12;
"|ntaxi:39|lpm_add_sub:1171|addcore:adder|:55" : LOCATION = LC7_F30;
"|ntaxi:39|lpm_add_sub:1171|addcore:adder|:59" : LOCATION = LC1_F30;
"|ntaxi:39|lpm_add_sub:1172|addcore:adder|:63" : LOCATION = LC8_E25;
"|ntaxi:39|lpm_add_sub:1172|addcore:adder|:71" : LOCATION = LC2_E1 ;
"|ntaxi:39|lpm_add_sub:1174|addcore:adder|:55" : LOCATION = LC5_B27;
"|ntaxi:39|lpm_add_sub:1175|addcore:adder|:55" : LOCATION = LC1_B13;
"|ntaxi:39|lpm_add_sub:1175|addcore:adder|:59" : LOCATION = LC1_B17;
"|ntaxi:39|lpm_add_sub:1176|addcore:adder|:55" : LOCATION = LC4_B26;
"|ntaxi:39|lpm_add_sub:1177|addcore:adder|:55" : LOCATION = LC1_B11;
"|ntaxi:39|lpm_add_sub:1178|addcore:adder|:55" : LOCATION = LC7_C15;
"|ntaxi:39|lpm_add_sub:1179|addcore:adder|:55" : LOCATION = LC5_F1 ;
"|ntaxi:39|lpm_add_sub:1179|addcore:adder|:59" : LOCATION = LC5_F14;
"|ntaxi:39|:39" : LOCATION = LC5_C15;
"|ntaxi:39|:97" : LOCATION = LC2_F39;
"|ntaxi:39|~97~1" : LOCATION = LC1_H42;
"|ntaxi:39|:117" : LOCATION = LC4_H42;
"|ntaxi:39|:124" : LOCATION = LC1_H32;
"|ntaxi:39|:164" : LOCATION = LC7_H42;
"|ntaxi:39|:165" : LOCATION = LC3_H42;
"|ntaxi:39|~218~1" : LOCATION = LC3_F39;
"|ntaxi:39|~218~2" : LOCATION = LC1_F39;
"|ntaxi:39|:228" : LOCATION = LC8_H42; -- |ntaxi:39|tempm6
"|ntaxi:39|:229" : LOCATION = LC5_H42; -- |ntaxi:39|tempm5
"|ntaxi:39|:230" : LOCATION = LC2_H42; -- |ntaxi:39|tempm4
"|ntaxi:39|:231" : LOCATION = LC6_H32; -- |ntaxi:39|tempm3
"|ntaxi:39|:232" : LOCATION = LC3_H32; -- |ntaxi:39|tempm2
"|ntaxi:39|:233" : LOCATION = LC7_H32; -- |ntaxi:39|tempm1
"|ntaxi:39|:234" : LOCATION = LC8_H32; -- |ntaxi:39|tempm0
"|ntaxi:39|:239" : LOCATION = LC4_F10;
"|ntaxi:39|:256" : LOCATION = LC8_F7 ;
"|ntaxi:39|:257" : LOCATION = LC4_F7 ;
"|ntaxi:39|~257~1" : LOCATION = LC7_F7 ;
"|ntaxi:39|:258" : LOCATION = LC8_F39;
"|ntaxi:39|:277" : LOCATION = LC2_F7 ;
"|ntaxi:39|:278" : LOCATION = LC6_F7 ;
"|ntaxi:39|:279" : LOCATION = LC5_F39;
"|ntaxi:39|:280" : LOCATION = LC4_F39;
"|ntaxi:39|:281" : LOCATION = LC3_F30;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -