receiver.fit

本程序是用VHDL语言实现异步通信控制器

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 09/07/2005 10:33:48      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "receiver"
BEGIN

    DEVICE = "EPM7064LC44-7";

    "A0"                           : INPUT_PIN  = 5      ; -- LC14
    "CS"                           : INPUT_PIN  = 14     ; -- LC30
    "RD"                           : INPUT_PIN  = 8      ; -- LC5
    "RESET"                        : INPUT_PIN  = 9      ; -- LC4
    "RXC"                          : INPUT_PIN  = 43     ;
    "RXD"                          : INPUT_PIN  = 11     ; -- LC3
    "TBE"                          : INPUT_PIN  = 13     ; -- LC32
    "WR"                           : INPUT_PIN  = 12     ; -- LC1
    "FE"                           : OUTPUT_PIN = 34     ; -- LC51
    "OVERFLOW"                     : OUTPUT_PIN = 7      ; -- LC8
    "PE"                           : OUTPUT_PIN = 29     ; -- LC41
    "RBF"                          : OUTPUT_PIN = 4      ; -- LC16
    "RX_buf0"                      : OUTPUT_PIN = 16     ; -- LC25
    "RX_buf1"                      : OUTPUT_PIN = 17     ; -- LC24
    "RX_buf2"                      : OUTPUT_PIN = 18     ; -- LC21
    "RX_buf3"                      : OUTPUT_PIN = 20     ; -- LC19
    "RX_buf4"                      : OUTPUT_PIN = 21     ; -- LC17
    "RX_buf5"                      : OUTPUT_PIN = 19     ; -- LC20
    "RX_buf6"                      : OUTPUT_PIN = 6      ; -- LC11
    "RX_buf7"                      : OUTPUT_PIN = 36     ; -- LC52
    "SCLK"                         : OUTPUT_PIN = 33     ; -- LC49
    "|control:u1|LPM_ADD_SUB:884|addcore:adder|addcore:adder0|result_node4" : LOCATION   = LC56   ; -- PIN 38
    "|control:u1|LPM_ADD_SUB:884|addcore:adder|addcore:adder0|result_node5" : LOCATION   = LC58   ;
    "|control:u1|LPM_ADD_SUB:941|addcore:adder|addcore:adder0|gcp2" : LOCATION   = LC60   ;
    "|control:u1|LPM_ADD_SUB:941|addcore:adder|addcore:adder0|result_node4" : LOCATION   = LC50   ;
    "|control:u1|LPM_ADD_SUB:941|addcore:adder|addcore:adder0|result_node5" : LOCATION   = LC53   ; -- PIN 37
    "|control:u1|LPM_ADD_SUB:1415|addcore:adder|addcore:adder0|result_node1" : LOCATION   = LC6    ;
    "|control:u1|LPM_ADD_SUB:1415|addcore:adder|addcore:adder0|result_node3" : LOCATION   = LC7    ;
    "|control:u1|:13"              : LOCATION   = LC39   ;  -- |control:u1|start
    "|control:u1|:14"              : LOCATION   = LC43   ;  -- |control:u1|t
    "|control:u1|:15"              : LOCATION   = LC54   ;  -- |control:u1|st
    "|control:u1|:16"              : LOCATION   = LC44   ;  -- |control:u1|count14
    "|control:u1|:17"              : LOCATION   = LC48   ; -- PIN 32  -- |control:u1|count13
    "|control:u1|:18"              : LOCATION   = LC47   ;  -- |control:u1|count12
    "|control:u1|:19"              : LOCATION   = LC46   ; -- PIN 31  -- |control:u1|count11
    "|control:u1|:20"              : LOCATION   = LC45   ;  -- |control:u1|count10
    "|control:u1|:22"              : LOCATION   = LC32   ; -- PIN 13  -- |control:u1|count24
    "|control:u1|:23"              : LOCATION   = LC31   ;  -- |control:u1|count23
    "|control:u1|:24"              : LOCATION   = LC30   ; -- PIN 14  -- |control:u1|count22
    "|control:u1|:25"              : LOCATION   = LC29   ;  -- |control:u1|count21
    "|control:u1|:26"              : LOCATION   = LC27   ;  -- |control:u1|count20
    "|control:u1|:27"              : LOCATION   = LC18   ;  -- |control:u1|clk1
    "|control:u1|:28"              : LOCATION   = LC55   ;  -- |control:u1|clk2
    "|control:u1|:29"              : LOCATION   = LC63   ;  -- |control:u1|count35
    "|control:u1|:30"              : LOCATION   = LC64   ; -- PIN 41  -- |control:u1|count34
    "|control:u1|:31"              : LOCATION   = LC57   ; -- PIN 39  -- |control:u1|count33
    "|control:u1|:32"              : LOCATION   = LC59   ;  -- |control:u1|count32
    "|control:u1|:33"              : LOCATION   = LC61   ;  -- |control:u1|count31
    "|control:u1|:34"              : LOCATION   = LC62   ; -- PIN 40  -- |control:u1|count30
    "|control:u1|:35"              : LOCATION   = LC1    ; -- PIN 12  -- |control:u1|count43
    "|control:u1|:36"              : LOCATION   = LC3    ; -- PIN 11  -- |control:u1|count42
    "|control:u1|:37"              : LOCATION   = LC4    ; -- PIN 9  -- |control:u1|count41
    "|control:u1|:38"              : LOCATION   = LC5    ; -- PIN 8  -- |control:u1|count40
    "|shifter:u2|:19"              : LOCATION   = LC33   ; -- PIN 24  -- |shifter:u2|temp8
    "|shifter:u2|:20"              : LOCATION   = LC38   ;  -- |shifter:u2|temp7
    "|shifter:u2|:21"              : LOCATION   = LC42   ;  -- |shifter:u2|temp6
    "|shifter:u2|:22"              : LOCATION   = LC40   ; -- PIN 28  -- |shifter:u2|temp5
    "|shifter:u2|:23"              : LOCATION   = LC37   ; -- PIN 27  -- |shifter:u2|temp4
    "|shifter:u2|:24"              : LOCATION   = LC36   ; -- PIN 26  -- |shifter:u2|temp3
    "|shifter:u2|:25"              : LOCATION   = LC35   ; -- PIN 25  -- |shifter:u2|temp2
    "|shifter:u2|:26"              : LOCATION   = LC34   ;  -- |shifter:u2|temp1
    "|shifter:u2|~799~1"           : LOCATION   = LC12   ;
    "|shifter:u2|~875~1"           : LOCATION   = LC2    ;
    "|shifter:u2|~875~2"           : LOCATION   = LC22   ;
    "|shifter:u2|~875~3"           : LOCATION   = LC28   ;
    "|shifter:u2|~875~4"           : LOCATION   = LC26   ;

END;

INTERNAL_INFO "receiver"
BEGIN
	DEVICE = EPM7064LC44-7;
	LC49    : LORAX = "G29R0";
	LC51    : LORAX = "G31R0";
	LC41    : LORAX = "G107R0";
	LC16    : LORAX = "G102R0,PA34R0C0,PA34R0C1,PA34R0C2,PA34R0C3";
	LC8     : LORAX = "G53R0";
	LC52    : LORAX = "G32R0";
	LC11    : LORAX = "G68R0";
	LC20    : LORAX = "G57R0";
	LC17    : LORAX = "G54R0";
	LC19    : LORAX = "G56R0";
	LC21    : LORAX = "G21R0";
	LC24    : LORAX = "G24R0";
	LC25    : LORAX = "G103R0";
	LC55    : LORAX = "G64R0,PA12R0C3";
	OH29R0P14 : LORAX = "G5R0,PA2R0C1,PA2R0C2,PA2R0C3";
	OH4R0P8 : LORAX = "G116R0,PA28R0C3,PA27R0C2,PA27R0C1";
	OH0R0P12 : LORAX = "G83R0,PA18R0C3,PA18R0C1,PA19R0C2";
	OH3R0P9 : LORAX = "G86R0,PA22R0C1,PA26R0C2,PA26R0C3";
	LC39    : LORAX = "G27R0,PA7R0C3,PA7R0C2";
	OH2R0P11 : LORAX = "G85R0,PA21R0C0,PA23R0C2,PA23R0C3";
	LC44    : LORAX = "G110R0,PA31R0C2";
	LC48    : LORAX = "G77R0,PA22R0C2";
	LC47    : LORAX = "G76R0,PA21R0C2";
	LC46    : LORAX = "G75R0,PA20R0C2";
	LC45    : LORAX = "G74R0,PA18R0C2";
	LC63    : LORAX = "G113R0,PA27R0C3";
	LC64    : LORAX = "G114R0,PA31R0C3";
	LC57    : LORAX = "G78R0,PA20R0C3";
	LC59    : LORAX = "G80R0,PA25R0C3";
	LC61    : LORAX = "G111R0,PA29R0C3";
	LC62    : LORAX = "G112R0,PA30R0C3";
	LC60    : LORAX = "G81R0,PA22R0C3";
	LC56    : LORAX = "G65R0,PA10R0C3";
	LC50    : LORAX = "G30R0,PA5R0C3";
	LC58    : LORAX = "G79R0,PA21R0C3";
	LC53    : LORAX = "G62R0,PA16R0C3";
	OH13R0P5 : LORAX = "G34R0,PA13R0C2,PA13R0C0";
	OH31R0P13 : LORAX = "G7R0,PA1R0C0,PA1R0C2";
	LC42    : LORAX = "G108R0,PA32R0C2,PA29R0C0";
	LC43    : LORAX = "G109R0,PA28R0C2";
	LC38    : LORAX = "G26R0,PA1R0C1,PA6R0C0,PA6R0C2";
	LC33    : LORAX = "G58R0,PA11R0C2,PA11R0C0,PA11R0C1";
	LC18    : LORAX = "G55R0,PA10R0C0,PA10R0C2";
	LC54    : LORAX = "G63R0,PA14R0C1,PA14R0C3";
	LC32    : LORAX = "G73R0,PA20R0C1";
	LC31    : LORAX = "G72R0,PA19R0C1";
	LC30    : LORAX = "G71R0,PA21R0C1";
	LC29    : LORAX = "G70R0,PA23R0C1";
	LC27    : LORAX = "G105R0,PA28R0C1";
	LC2     : LORAX = "G18R0,PA0R0C2";
	LC37    : LORAX = "G25R0,PA4R0C0,PA4R0C1,PA4R0C2";
	LC40    : LORAX = "G28R0,PA5R0C2,PA0R0C3";
	LC36    : LORAX = "G61R0,PA9R0C1,PA9R0C2,PA9R0C0";
	LC35    : LORAX = "G60R0,PA12R0C1,PA12R0C0,PA12R0C2";
	LC34    : LORAX = "G59R0,PA10R0C1,PA15R0C0,PA15R0C2";
	LC12    : LORAX = "G69R0,PA25R0C2";
	LC1     : LORAX = "G17R0,PA5R0C0";
	LC3     : LORAX = "G19R0,PA8R0C0";
	LC4     : LORAX = "G20R0,PA2R0C0";
	LC5     : LORAX = "G50R0,PA14R0C0";
	LC6     : LORAX = "G51R0,PA16R0C0";
	LC7     : LORAX = "G52R0,PA17R0C0";
	LC22    : LORAX = "G22R0,PA3R0C0";
	LC28    : LORAX = "G106R0,PA31R0C0";
	LC26    : LORAX = "G104R0,PA30R0C0";
END;