send.fit

本程序是用VHDL语言实现异步通信控制器

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 09/07/2005 11:14:58      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "send"
BEGIN

    DEVICE = "EPM7064LC44-7";

    "A0"                           : INPUT_PIN  = 12     ; -- LC1
    "CS"                           : INPUT_PIN  = 7      ; -- LC8
    "d_in0"                        : INPUT_PIN  = 18     ; -- LC21
    "d_in1"                        : INPUT_PIN  = 19     ; -- LC20
    "d_in2"                        : INPUT_PIN  = 4      ; -- LC16
    "d_in3"                        : INPUT_PIN  = 5      ; -- LC14
    "d_in4"                        : INPUT_PIN  = 6      ; -- LC11
    "d_in5"                        : INPUT_PIN  = 17     ; -- LC24
    "d_in6"                        : INPUT_PIN  = 21     ; -- LC17
    "d_in7"                        : INPUT_PIN  = 20     ; -- LC19
    "RD"                           : INPUT_PIN  = 11     ; -- LC3
    "reset"                        : INPUT_PIN  = 8      ; -- LC5
    "TXC"                          : INPUT_PIN  = 43     ;
    "WR"                           : INPUT_PIN  = 9      ; -- LC4
    "D_OUT"                        : OUTPUT_PIN = 31     ; -- LC46
    "TBE_out"                      : OUTPUT_PIN = 24     ; -- LC33
    "|LPM_ADD_SUB:381|addcore:adder|addcore:adder0|result_node1" : LOCATION   = LC39   ;
    "|LPM_ADD_SUB:381|addcore:adder|addcore:adder0|result_node3" : LOCATION   = LC62   ; -- PIN 40
    ":17"                          : LOCATION   = LC38   ;  -- count24
    ":18"                          : LOCATION   = LC40   ; -- PIN 28  -- count23
    ":19"                          : LOCATION   = LC43   ;  -- count22
    ":20"                          : LOCATION   = LC41   ; -- PIN 29  -- count21
    ":21"                          : LOCATION   = LC42   ;  -- count20
    ":22"                          : LOCATION   = LC34   ;  -- clk
    ":23"                          : LOCATION   = LC35   ; -- PIN 25  -- count13
    ":24"                          : LOCATION   = LC36   ; -- PIN 26  -- count12
    ":25"                          : LOCATION   = LC37   ; -- PIN 27  -- count11
    ":26"                          : LOCATION   = LC21   ; -- PIN 18  -- count10
    ":28"                          : LOCATION   = LC45   ;  -- temp8
    ":29"                          : LOCATION   = LC48   ; -- PIN 32  -- temp7
    ":30"                          : LOCATION   = LC22   ;  -- temp6
    ":31"                          : LOCATION   = LC49   ; -- PIN 33  -- temp5
    ":32"                          : LOCATION   = LC51   ; -- PIN 34  -- temp4
    ":33"                          : LOCATION   = LC54   ;  -- temp3
    ":34"                          : LOCATION   = LC63   ;  -- temp2
    ":35"                          : LOCATION   = LC64   ; -- PIN 41  -- temp1
    ":36"                          : LOCATION   = LC61   ;  -- temp0
    "~1203~1"                      : LOCATION   = LC47   ;
    "~1209~1"                      : LOCATION   = LC44   ;
    "~1215~1"                      : LOCATION   = LC17   ; -- PIN 21
    "~1221~1"                      : LOCATION   = LC52   ; -- PIN 36
    "~1227~1"                      : LOCATION   = LC53   ; -- PIN 37
    "~1227~2"                      : LOCATION   = LC55   ;
    "~1233~1"                      : LOCATION   = LC56   ; -- PIN 38
    "~1233~2"                      : LOCATION   = LC57   ; -- PIN 39
    "~1239~1"                      : LOCATION   = LC58   ;
    "~1239~2"                      : LOCATION   = LC59   ;
    "~1245~1"                      : LOCATION   = LC60   ;
    "~1245~2"                      : LOCATION   = LC50   ;

END;

INTERNAL_INFO "send"
BEGIN
	DEVICE = EPM7064LC44-7;
	LC46    : LORAX = "G75R0";
	LC33    : LORAX = "G58R0,PA11R0C2";
	LC35    : LORAX = "G60R0,PA12R0C2,PA12R0C1,PA16R0C3";
	LC36    : LORAX = "G61R0,PA9R0C3,PA9R0C2,PA9R0C1";
	LC37    : LORAX = "G25R0,PA2R0C2,PA2R0C1,PA2R0C3";
	LC21    : LORAX = "G21R0,PA7R0C3,PA7R0C1,PA7R0C2";
	LC34    : LORAX = "G59R0,PA10R0C2,PA10R0C1,PA15R0C3";
	OH7R0P7 : LORAX = "G119R0,PA31R0C1,PA31R0C2,PA35R0C3";
	OH0R0P12 : LORAX = "G83R0,PA18R0C1,PA18R0C3,PA19R0C2";
	OH2R0P11 : LORAX = "G85R0,PA21R0C1,PA23R0C3,PA23R0C2";
	OH3R0P9 : LORAX = "G86R0,PA22R0C1,PA26R0C3,PA26R0C2";
	OH4R0P8 : LORAX = "G116R0,PA27R0C1,PA27R0C2,PA27R0C3";
	LC38    : LORAX = "G26R0,PA6R0C2";
	LC40    : LORAX = "G28R0,PA5R0C2";
	LC43    : LORAX = "G109R0,PA28R0C2";
	LC41    : LORAX = "G107R0,PA35R0C2";
	LC42    : LORAX = "G108R0,PA29R0C2";
	LC39    : LORAX = "G27R0,PA3R0C2";
	LC62    : LORAX = "G112R0,PA30R0C2";
	LC45    : LORAX = "G74R0,PA18R0C2";
	OH20R0P18 : LORAX = "G87R0,PA20R0C2";
	LC48    : LORAX = "G77R0,PA22R0C2";
	OH19R0P19 : LORAX = "G123R0,PA33R0C2";
	LC22    : LORAX = "G22R0,PA1R0C1,PA1R0C2";
	OH15R0P4 : LORAX = "G36R0,PA14R0C1";
	LC49    : LORAX = "G29R0,PA8R0C3,PA8R0C1";
	OH13R0P5 : LORAX = "G34R0,PA13R0C3";
	LC51    : LORAX = "G31R0,PA4R0C3";
	OH10R0P6 : LORAX = "G2R0,PA0R0C3";
	LC54    : LORAX = "G63R0,PA14R0C3";
	OH23R0P17 : LORAX = "G90R0,PA24R0C3";
	LC63    : LORAX = "G113R0,PA34R0C3";
	OH16R0P21 : LORAX = "G120R0,PA29R0C3";
	LC64    : LORAX = "G114R0,PA31R0C3";
	OH18R0P20 : LORAX = "G122R0,PA32R0C3";
	LC61    : LORAX = "G111R0,PA33R0C3";
	LC60    : LORAX = "G81R0,PA22R0C3";
	LC58    : LORAX = "G79R0,PA21R0C3";
	LC56    : LORAX = "G65R0,PA10R0C3";
	LC53    : LORAX = "G62R0,PA17R0C3";
	LC52    : LORAX = "G32R0,PA1R0C3";
	LC17    : LORAX = "G54R0,PA16R0C1";
	LC44    : LORAX = "G110R0,PA34R0C2";
	LC47    : LORAX = "G76R0,PA21R0C2";
	LC50    : LORAX = "G30R0,PA5R0C3";
	LC59    : LORAX = "G80R0,PA25R0C3";
	LC57    : LORAX = "G78R0,PA20R0C3";
	LC55    : LORAX = "G64R0,PA12R0C3";
END;