communication.rpt

本程序是用VHDL语言实现异步通信控制器

Device-Specific Information:c:\documents and settings\focuson\desktop\zong\communication.rpt
communication

** LOGIC CELL INTERCONNECTIONS **

Logic Array Block 'D':

                                         Logic cells placed in LAB 'D'
        +------------------------------- LC64 |send:u1|LPM_ADD_SUB:341|addcore:adder|addcore:adder0|result_node1
        | +----------------------------- LC61 |send:u1|LPM_ADD_SUB:341|addcore:adder|addcore:adder0|result_node3
        | | +--------------------------- LC57 |send:u1|count24
        | | | +------------------------- LC50 |send:u1|count23
        | | | | +----------------------- LC62 |send:u1|count22
        | | | | | +--------------------- LC55 |send:u1|count21
        | | | | | | +------------------- LC59 |send:u1|count20
        | | | | | | | +----------------- LC60 |send:u1|clk
        | | | | | | | | +--------------- LC49 |send:u1|count12
        | | | | | | | | | +------------- LC52 |send:u1|count10
        | | | | | | | | | | +----------- LC53 |send:u1|temp8
        | | | | | | | | | | | +--------- LC63 |send:u1|temp1
        | | | | | | | | | | | | +------- LC58 |send:u1|temp0
        | | | | | | | | | | | | | +----- LC54 |send:u1|~1029~1
        | | | | | | | | | | | | | | +--- LC51 TXD
        | | | | | | | | | | | | | | | +- LC56 ~174~1
        | | | | | | | | | | | | | | | | 
        | | | | | | | | | | | | | | | |   Other LABs fed by signals
        | | | | | | | | | | | | | | | |   that feed LAB 'D'
LC      | | | | | | | | | | | | | | | | | A B C D E F |     Logic cells that feed LAB 'D':
LC57 -> - - * * * * * * - - - - - - - - | - - - * - - | <-- |send:u1|count24
LC50 -> - - * * * * * * - - - - - - - - | - - - * - - | <-- |send:u1|count23
LC62 -> - - * * * * * * - - - - - - - - | - - - * - - | <-- |send:u1|count22
LC55 -> - - * * * * * * - - - - - - - - | - - - * - - | <-- |send:u1|count21
LC59 -> - - * * * * * * - - - - - - - - | - - - * - - | <-- |send:u1|count20
LC60 -> - - - - - - - * * * * * * - * - | * * * * - - | <-- |send:u1|clk
LC49 -> - * - - - - - - * - * * * * * - | * * * * - - | <-- |send:u1|count12
LC52 -> * * - - - - - - * * * * * * * - | * * * * - - | <-- |send:u1|count10
LC53 -> - - - - - - - - - - * - - - * - | - - - * - - | <-- |send:u1|temp8
LC63 -> - - - - - - - - - - - * - * - - | - - * * - - | <-- |send:u1|temp1
LC58 -> - - - - - - - - - - - * * * - - | - - - * - - | <-- |send:u1|temp0
LC54 -> - - - - - - - - - - - * - - - - | - - - * - - | <-- |send:u1|~1029~1
LC56 -> - - * * * * * * * * * * * * * * | * * * * * - | <-- ~174~1

Pin
68   -> - - - - - - - - - - - - - - - - | - - - - - - | <-- ~PIN001
12   -> - - * * * * * * * * * * * * * * | * * * * * * | <-- reset
67   -> - - - - - - - - - - - - - - - - | - - - - - - | <-- RXC
4    -> - - * * * * * * - - - - - - - - | - - - * - - | <-- TXC
LC65 -> - - - - - - - - - - * - - - - - | - - - * - - | <-- D3
LC37 -> - - - - - - - - - - - * - - - - | - - - * - - | <-- D4
LC2  -> - * - - - - - - - - * * * * * - | * * * * - - | <-- |send:u1|count13
LC3  -> * * - - - - - - * - * * * * * - | * * * * - - | <-- |send:u1|count11
LC13 -> - - - - - - - - - - * - - - - - | * - - * - - | <-- |send:u1|temp7
LC5  -> - - * * * * * * * * * * * * * * | * * * * * - | <-- ~175~1


* = The logic cell or pin is an input to the logic cell (or LAB) through the PIA.
- = The logic cell or pin is not an input to the logic cell (or LAB).


Device-Specific Information:c:\documents and settings\focuson\desktop\zong\communication.rpt
communication

** LOGIC CELL INTERCONNECTIONS **

Logic Array Block 'E':

                                         Logic cells placed in LAB 'E'
        +------------------------------- LC67 D2
        | +----------------------------- LC65 D3
        | | +--------------------------- LC69 |receiver:u2|control:u1|LPM_ADD_SUB:1377|addcore:adder|addcore:adder0|result_node1
        | | | +------------------------- LC70 |receiver:u2|control:u1|LPM_ADD_SUB:1377|addcore:adder|addcore:adder0|result_node3
        | | | | +----------------------- LC66 |receiver:u2|control:u1|start
        | | | | | +--------------------- LC71 |receiver:u2|control:u1|count14
        | | | | | | +------------------- LC76 |receiver:u2|control:u1|count13
        | | | | | | | +----------------- LC78 |receiver:u2|control:u1|count12
        | | | | | | | | +--------------- LC75 |receiver:u2|control:u1|count11
        | | | | | | | | | +------------- LC74 |receiver:u2|control:u1|count10
        | | | | | | | | | | +----------- LC79 |receiver:u2|control:u1|stop
        | | | | | | | | | | | +--------- LC68 |receiver:u2|control:u1|count43
        | | | | | | | | | | | | +------- LC73 |receiver:u2|control:u1|count42
        | | | | | | | | | | | | | +----- LC72 |receiver:u2|control:u1|count41
        | | | | | | | | | | | | | | +--- LC77 |receiver:u2|control:u1|count40
        | | | | | | | | | | | | | | | +- LC80 |receiver:u2|shifter:u2|temp1
        | | | | | | | | | | | | | | | | 
        | | | | | | | | | | | | | | | |   Other LABs fed by signals
        | | | | | | | | | | | | | | | |   that feed LAB 'E'
LC      | | | | | | | | | | | | | | | | | A B C D E F |     Logic cells that feed LAB 'E':
LC69 -> - - - - - - - - - - - - - * - - | - - - - * - | <-- |receiver:u2|control:u1|LPM_ADD_SUB:1377|addcore:adder|addcore:adder0|result_node1
LC70 -> - - - - - - - - - - - * - - - - | - - - - * - | <-- |receiver:u2|control:u1|LPM_ADD_SUB:1377|addcore:adder|addcore:adder0|result_node3
LC66 -> - - - - * * * * * * - - - - - * | - - - - * * | <-- |receiver:u2|control:u1|start
LC71 -> - - - - * * * - - * - - - - - - | - - - - * - | <-- |receiver:u2|control:u1|count14
LC76 -> - - - - * * * - - * - - - - - - | - - - - * - | <-- |receiver:u2|control:u1|count13
LC78 -> - - - - * * * * - * - - - - - - | - - - - * - | <-- |receiver:u2|control:u1|count12
LC75 -> - - - - * * * * * * - - - - - - | - - - - * - | <-- |receiver:u2|control:u1|count11
LC74 -> - - - - * * * * * * - - - - - - | - - - - * - | <-- |receiver:u2|control:u1|count10
LC79 -> * * - - * * * * * * - - - - - * | * - * - * * | <-- |receiver:u2|control:u1|stop
LC68 -> - - - * - - - - - - * * - * * - | - - - - * - | <-- |receiver:u2|control:u1|count43
LC73 -> - - - * - - - - - - * * * * * - | - - - - * - | <-- |receiver:u2|control:u1|count42
LC72 -> - - * * - - - - - - * * * * * - | - - - - * - | <-- |receiver:u2|control:u1|count41
LC77 -> - - * * - - - - - - * * * * * - | - - - - * - | <-- |receiver:u2|control:u1|count40
LC80 -> - * - - - - - - - - - - - - - * | - - - - * - | <-- |receiver:u2|shifter:u2|temp1

Pin
68   -> - - - - - - - - - - - - - - - - | - - - - - - | <-- ~PIN001
12   -> - - - - * * * * * * - - - - - - | * * * * * * | <-- reset
67   -> - - - - - - - - - - - - - - - - | - - - - - - | <-- RXC
10   -> - - - - * * * * * * - * - - * - | - - - - * * | <-- RXD
LC86 -> - - - - - - - - - - - - - - - * | - - - - * * | <-- |receiver:u2|control:u1|t
LC85 -> - - - - - - - - - - * * * * * * | - - - - * * | <-- |receiver:u2|control:u1|clk1
LC93 -> * - - - - - - - - - - - - - - * | - - - - * * | <-- |receiver:u2|shifter:u2|temp2
LC56 -> * * - - - - - - - - - - - - - - | * * * * * - | <-- ~174~1
LC5  -> * * - - - - - - - - - - - - - - | * * * * * - | <-- ~175~1


* = The logic cell or pin is an input to the logic cell (or LAB) through the PIA.
- = The logic cell or pin is not an input to the logic cell (or LAB).


Device-Specific Information:c:\documents and settings\focuson\desktop\zong\communication.rpt
communication

** LOGIC CELL INTERCONNECTIONS **

Logic Array Block 'F':

                                         Logic cells placed in LAB 'F'
        +------------------------------- LC96 |receiver:u2|control:u1|LPM_ADD_SUB:652|addcore:adder|addcore:adder0|result_node3
        | +----------------------------- LC86 |receiver:u2|control:u1|t
        | | +--------------------------- LC94 |receiver:u2|control:u1|st
        | | | +------------------------- LC83 |receiver:u2|control:u1|count24
        | | | | +----------------------- LC84 |receiver:u2|control:u1|count23
        | | | | | +--------------------- LC88 |receiver:u2|control:u1|count22
        | | | | | | +------------------- LC90 |receiver:u2|control:u1|count21
        | | | | | | | +----------------- LC91 |receiver:u2|control:u1|count20
        | | | | | | | | +--------------- LC85 |receiver:u2|control:u1|clk1
        | | | | | | | | | +------------- LC82 |receiver:u2|shifter:u2|temp8
        | | | | | | | | | | +----------- LC81 |receiver:u2|shifter:u2|temp7
        | | | | | | | | | | | +--------- LC95 |receiver:u2|shifter:u2|temp6
        | | | | | | | | | | | | +------- LC87 |receiver:u2|shifter:u2|temp5
        | | | | | | | | | | | | | +----- LC89 |receiver:u2|shifter:u2|temp4
        | | | | | | | | | | | | | | +--- LC92 |receiver:u2|shifter:u2|temp3
        | | | | | | | | | | | | | | | +- LC93 |receiver:u2|shifter:u2|temp2
        | | | | | | | | | | | | | | | | 
        | | | | | | | | | | | | | | | |   Other LABs fed by signals
        | | | | | | | | | | | | | | | |   that feed LAB 'F'
LC      | | | | | | | | | | | | | | | | | A B C D E F |     Logic cells that feed LAB 'F':
LC96 -> - - - - * - - - - - - - - - - - | - - - - - * | <-- |receiver:u2|control:u1|LPM_ADD_SUB:652|addcore:adder|addcore:adder0|result_node3
LC86 -> - * - - - - - - - * * * * * * * | - - - - * * | <-- |receiver:u2|control:u1|t
LC94 -> - - * * * * * * * - - - - - - - | - - - - - * | <-- |receiver:u2|control:u1|st
LC83 -> - - - * * * * * * - - - - - - - | - - - - - * | <-- |receiver:u2|control:u1|count24
LC84 -> * - - * * * * * * - - - - - - - | - - - - - * | <-- |receiver:u2|control:u1|count23
LC88 -> * - - * * * * * * - - - - - - - | - - - - - * | <-- |receiver:u2|control:u1|count22
LC90 -> * - - * * * * * * - - - - - - - | - - - - - * | <-- |receiver:u2|control:u1|count21
LC91 -> * - - * * * * * * - - - - - - - | - - - - - * | <-- |receiver:u2|control:u1|count20
LC85 -> - - - - - - - - * * * * * * * * | - - - - * * | <-- |receiver:u2|control:u1|clk1
LC82 -> - - - - - - - - - * * - - - - - | - - * - - * | <-- |receiver:u2|shifter:u2|temp8
LC81 -> - - - - - - - - - - * * - - - - | - - * - - * | <-- |receiver:u2|shifter:u2|temp7
LC95 -> - - - - - - - - - - - * * - - - | - - * - - * | <-- |receiver:u2|shifter:u2|temp6
LC87 -> - - - - - - - - - - - - * * - - | - - * - - * | <-- |receiver:u2|shifter:u2|temp5
LC89 -> - - - - - - - - - - - - - * * - | - - * - - * | <-- |receiver:u2|shifter:u2|temp4
LC92 -> - - - - - - - - - - - - - - * * | - - * - - * | <-- |receiver:u2|shifter:u2|temp3
LC93 -> - - - - - - - - - - - - - - - * | - - - - * * | <-- |receiver:u2|shifter:u2|temp2

Pin
68   -> - - - - - - - - - - - - - - - - | - - - - - - | <-- ~PIN001
12   -> - * * * * * * * * - - - - - - - | * * * * * * | <-- reset
67   -> - - - - - - - - - - - - - - - - | - - - - - - | <-- RXC
10   -> - * * - - - - - - * - - - - - - | - - - - * * | <-- RXD
LC66 -> - * * - - - - - - * * * * * * * | - - - - * * | <-- |receiver:u2|control:u1|start
LC79 -> - * - - - - - - - * * * * * * * | * - * - * * | <-- |receiver:u2|control:u1|stop


* = The logic cell or pin is an input to the logic cell (or LAB) through the PIA.
- = The logic cell or pin is not an input to the logic cell (or LAB).


Device-Specific Information:c:\documents and settings\focuson\desktop\zong\communication.rpt
communication

** EQUATIONS **

CS       : INPUT;
RD       : INPUT;
reset    : INPUT;
RXC      : INPUT;
RXD      : INPUT;
TXC      : INPUT;
WR       : INPUT;
~PIN001  : INPUT;

-- Node name is 'D0' 
-- Equation name is 'D0', location is LC043, type is bidir.
D0       = TRI(_LC043, GLOBAL(!~PIN001));
_LC043   = LCELL( _EQ001 $  GND);
  _EQ001 =  _LC005 &  _LC079 &  _LC089
         #  _LC056 &  _LC079 &  _LC089;

-- Node name is 'D1' 
-- Equation name is 'D1', location is LC041, type is bidir.
D1       = TRI(_LC041, GLOBAL(!~PIN001));
_LC041   = LCELL( _EQ002 $  GND);
  _EQ002 =  _LC005 &  _LC079 &  _LC092
         #  _LC056 &  _LC079 &  _LC092;

-- Node name is 'D2' 
-- Equation name is 'D2', location is LC067, type is bidir.
D2       = TRI(_LC067, GLOBAL(!~PIN001));
_LC067   = LCELL( _EQ003 $  GND);
  _EQ003 =  _LC005 &  _LC079 &  _LC093
         #  _LC056 &  _LC079 &  _LC093;

-- Node name is 'D3' 
-- Equation name is 'D3', location is LC065, type is bidir.
D3       = TRI(_LC065, GLOBAL(!~PIN001));
_LC065   = LCELL( _EQ004 $  GND);
  _EQ004 =  _LC005 &  _LC079 &  _LC080
         #  _LC056 &  _LC079 &  _LC080;

-- Node name is 'D4' 
-- Equation name is 'D4', location is LC037, type is bidir.
D4       = TRI(_LC037, GLOBAL(!~PIN001));
_LC037   = LCELL( _EQ005 $  GND);
  _EQ005 =  _LC005 &  _LC079 &  _LC082
         #  _LC056 &  _LC079 &  _LC082;

-- Node name is 'D5' 
-- Equation name is 'D5', location is LC035, type is bidir.
D5       = TRI(_LC035, GLOBAL(!~PIN001));
_LC035   = LCELL( _EQ006 $  GND);
  _EQ006 =  _LC005 &  _LC079 &  _LC081
         #  _LC056 &  _LC079 &  _LC081;

-- Node name is 'D6' 
-- Equation name is 'D6', location is LC033, type is bidir.
D6       = TRI(_LC033, GLOBAL(!~PIN001));
_LC033   = LCELL( _EQ007 $  GND);
  _EQ007 =  _LC005 &  _LC079 &  _LC095
         #  _LC056 &  _LC079 &  _LC095;

-- Node name is 'D7' 
-- Equation name is 'D7', location is LC040, type is bidir.
D7       = TRI(_LC040, GLOBAL(!~PIN001));
_LC040   = LCELL( _EQ008 $  GND);
  _EQ008 =  _LC005 &  _LC079 &  _LC087
         #  _LC056 &  _LC079 &  _LC087;

-- Node name is 'TXD' = '|send:u1|temp9' 
-- Equation name is 'TXD', type is output 
 TXD     = DFFE( _EQ009 $  _LC053,  _LC060,  VCC, !_EQ010,  VCC);
  _EQ009 =  _LC002 & !_LC003 & !_LC049 &  _LC052 & !_LC053
         # !_LC002 & !_LC003 & !_LC049 & !_LC052 &  _LC053;
  _EQ010 =  _X001;
  _X001  = EXP(!_LC005 & !_LC056 &  reset);