selection.fit

本程序是用VHDL语言实现异步通信控制器

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 09/07/2005 10:32:11      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "selection"
BEGIN

    DEVICE = "EPM7064LC68-7";

    "A0"                           : INPUT_PIN  = 30     ; -- LC20
    "CS"                           : INPUT_PIN  = 9      ; -- LC11
    "RD"                           : INPUT_PIN  = 12     ; -- LC8
    "Rx_buf0"                      : INPUT_PIN  = 32     ; -- LC19
    "Rx_buf1"                      : INPUT_PIN  = 8      ; -- LC12
    "Rx_buf2"                      : INPUT_PIN  = 4      ; -- LC16
    "Rx_buf3"                      : INPUT_PIN  = 29     ; -- LC21
    "Rx_buf4"                      : INPUT_PIN  = 28     ; -- LC22
    "Rx_buf5"                      : INPUT_PIN  = 25     ; -- LC25
    "Rx_buf6"                      : INPUT_PIN  = 19     ; -- LC32
    "Rx_buf7"                      : INPUT_PIN  = 15     ; -- LC4
    "status0"                      : INPUT_PIN  = 14     ; -- LC5
    "status1"                      : INPUT_PIN  = 13     ; -- LC6
    "status2"                      : INPUT_PIN  = 7      ; -- LC13
    "status3"                      : INPUT_PIN  = 5      ; -- LC14
    "status4"                      : INPUT_PIN  = 27     ; -- LC24
    "status5"                      : INPUT_PIN  = 23     ; -- LC28
    "status6"                      : INPUT_PIN  = 22     ; -- LC29
    "status7"                      : INPUT_PIN  = 20     ; -- LC30
    "WR"                           : INPUT_PIN  = 17     ; -- LC3
    "~380~2"                       : INPUT_PIN  = 68     ;  -- ~PIN001
    "Tx_buf0"                      : OUTPUT_PIN = 65     ; -- LC64
    "Tx_buf1"                      : OUTPUT_PIN = 61     ; -- LC60
    "Tx_buf2"                      : OUTPUT_PIN = 52     ; -- LC51
    "Tx_buf3"                      : OUTPUT_PIN = 64     ; -- LC62
    "Tx_buf4"                      : OUTPUT_PIN = 51     ; -- LC49
    "Tx_buf5"                      : OUTPUT_PIN = 62     ; -- LC61
    "Tx_buf6"                      : OUTPUT_PIN = 59     ; -- LC57
    "Tx_buf7"                      : OUTPUT_PIN = 57     ; -- LC56
    "~380~1"                       : OUTPUT_PIN = 45     ; -- LC43  -- ~PIN002
    "D0"                           : BIDIR_PIN  = 42     ; -- LC40
    "D1"                           : BIDIR_PIN  = 41     ; -- LC38
    "D2"                           : BIDIR_PIN  = 39     ; -- LC36
    "D3"                           : BIDIR_PIN  = 36     ; -- LC33
    "D4"                           : BIDIR_PIN  = 47     ; -- LC45
    "D5"                           : BIDIR_PIN  = 44     ; -- LC41
    "D6"                           : BIDIR_PIN  = 37     ; -- LC35
    "D7"                           : BIDIR_PIN  = 40     ; -- LC37
    "~308~1~2"                     : LOCATION   = LC54   ; -- PIN 56
    "~317~1~2"                     : LOCATION   = LC53   ; -- PIN 55
    "~326~1~2"                     : LOCATION   = LC52   ; -- PIN 54
    "~335~1~2"                     : LOCATION   = LC50   ;
    "~344~1~2"                     : LOCATION   = LC55   ;
    "~353~1~2"                     : LOCATION   = LC59   ; -- PIN 60
    "~362~1~2"                     : LOCATION   = LC63   ;
    "~371~1~2"                     : LOCATION   = LC58   ;

END;

INTERNAL_INFO "selection"
BEGIN
	DEVICE = EPM7064LC68-7;
	LC37    : LORAX = "G25R0";
	LC35    : LORAX = "G60R0";
	LC41    : LORAX = "G107R0";
	LC45    : LORAX = "G74R0";
	LC33    : LORAX = "G58R0";
	LC36    : LORAX = "G61R0";
	LC38    : LORAX = "G26R0";
	LC40    : LORAX = "G28R0";
	LC56    : LORAX = "G65R0,PA11R0C3";
	LC57    : LORAX = "G78R0,PA20R0C3";
	LC61    : LORAX = "G111R0,PA33R0C3";
	LC49    : LORAX = "G29R0,PA7R0C3";
	LC62    : LORAX = "G112R0,PA30R0C3";
	LC51    : LORAX = "G31R0,PA4R0C3";
	LC60    : LORAX = "G81R0,PA22R0C3";
	LC64    : LORAX = "G114R0,PA31R0C3";
	OH10R0P9 : LORAX = "G2R0,PA3R0C2,PA3R0C3";
	OH19R0P30 : LORAX = "G123R0,PA33R0C2";
	OH7R0P12 : LORAX = "G119R0,PA31R0C2,PA35R0C3";
	OH2R0P17 : LORAX = "G85R0,PA23R0C2,PA23R0C3";
	OH29R0P20 : LORAX = "G5R0,PA2R0C2";
	OH3R0P15 : LORAX = "G86R0,PA22R0C2";
	OH28R0P22 : LORAX = "G4R0,PA1R0C2";
	OH31R0P19 : LORAX = "G7R0,PA8R0C2";
	OH27R0P23 : LORAX = "G40R0,PA10R0C2";
	OH24R0P25 : LORAX = "G37R0,PA16R0C2";
	OH23R0P27 : LORAX = "G90R0,PA24R0C2";
	OH21R0P28 : LORAX = "G88R0,PA21R0C2";
	OH13R0P5 : LORAX = "G34R0,PA13R0C2";
	OH20R0P29 : LORAX = "G87R0,PA20R0C2";
	OH12R0P7 : LORAX = "G33R0,PA9R0C2";
	OH15R0P4 : LORAX = "G36R0,PA17R0C2";
	OH5R0P13 : LORAX = "G117R0,PA29R0C2";
	OH11R0P8 : LORAX = "G3R0,PA5R0C2";
	OH4R0P14 : LORAX = "G116R0,PA27R0C2";
	OH18R0P32 : LORAX = "G122R0,PA32R0C2";
	LC54    : LORAX = "G63R0,PA14R0C3";
	LC53    : LORAX = "G62R0,PA17R0C3";
	LC52    : LORAX = "G32R0,PA2R0C3";
	LC50    : LORAX = "G30R0,PA5R0C3";
	LC55    : LORAX = "G64R0,PA12R0C3";
	LC59    : LORAX = "G80R0,PA25R0C3";
	LC63    : LORAX = "G113R0,PA27R0C3";
	LC58    : LORAX = "G79R0,PA21R0C3";
	LC43    : LORAX = "G109R0";
END;

CONNECTED_PINS "~AUTO_GROUP001"
    BEGIN
        "~380~2"                       : INPUT_PIN;
        "~380~1"                       : OUTPUT_PIN;
    END;