fpqandtest.fit

测频器

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 05/27/2005 14:52:26      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "fpqandtest"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "F1KHZ"                        : INPUT_PIN  = 1      ;
    "CLK"                          : OUTPUT_PIN = 60     ;
    "CNT_EN"                       : OUTPUT_PIN = 69     ;
    "LORD"                         : OUTPUT_PIN = 72     ;
    "RST"                          : OUTPUT_PIN = 73     ;
    "CLK~1"                        : LOCATION   = LC4_C20;
    "|FENPINQI:10|LPM_ADD_SUB:161|addcore:adder|:87" : LOCATION   = LC2_A13;
    "|FENPINQI:10|LPM_ADD_SUB:161|addcore:adder|:91" : LOCATION   = LC5_A23;
    "|FENPINQI:10|LPM_ADD_SUB:161|addcore:adder|:99" : LOCATION   = LC1_A17;
    "|FENPINQI:10|LPM_ADD_SUB:161|addcore:adder|:107" : LOCATION   = LC3_A17;
    "|FENPINQI:10|:4"              : LOCATION   = LC8_A17;  -- |FENPINQI:10|COUT9
    "|FENPINQI:10|:5"              : LOCATION   = LC4_A17;  -- |FENPINQI:10|COUT8
    "|FENPINQI:10|:6"              : LOCATION   = LC6_A17;  -- |FENPINQI:10|COUT7
    "|FENPINQI:10|:7"              : LOCATION   = LC7_A17;  -- |FENPINQI:10|COUT6
    "|FENPINQI:10|:8"              : LOCATION   = LC5_A17;  -- |FENPINQI:10|COUT5
    "|FENPINQI:10|:9"              : LOCATION   = LC2_A23;  -- |FENPINQI:10|COUT4
    "|FENPINQI:10|:10"             : LOCATION   = LC1_A23;  -- |FENPINQI:10|COUT3
    "|FENPINQI:10|:11"             : LOCATION   = LC5_A13;  -- |FENPINQI:10|COUT2
    "|FENPINQI:10|:12"             : LOCATION   = LC3_A13;  -- |FENPINQI:10|COUT1
    "|FENPINQI:10|:13"             : LOCATION   = LC4_A13;  -- |FENPINQI:10|COUT0
    "|FENPINQI:10|:73"             : LOCATION   = LC4_A23;
    "|FENPINQI:10|~95~1"           : LOCATION   = LC3_A23;
    "|FENPINQI:10|:491"            : LOCATION   = LC8_A13;
    "|FENPINQI:10|~491~1"          : LOCATION   = LC2_A17;
    "|FENPINQI:10|~491~2"          : LOCATION   = LC7_A13;
    "|FENPINQI:10|:494"            : LOCATION   = LC1_A13;
    "|FENPINQI:10|~496~1"          : LOCATION   = LC6_A13;
    "|TEST:8|:5"                   : LOCATION   = LC8_A24;  -- |TEST:8|DIV2CLK
    "|TEST:8|~5~1"                 : LOCATION   = LC3_A24;  -- |TEST:8|DIV2CLK~1
    "|TEST:8|:36"                  : LOCATION   = LC1_A24;

END;

INTERNAL_INFO "fpqandtest"
BEGIN
	DEVICE = EPF10K10LC84-3;
    LC4_C20 : LORAX = "1:MSW3R2C19,HHR13R2->OH3R2P60|";
    LC2_A13 : LORAX = "1:|2:MSW1R0C13,HHR11R0,PA4R0C16->LC1_A17|,2:MSW1R0C12,HHR8R0,PA14R0C22->LC5_A23,->LC2_A23,->LC1_A23,->LC4_A23||";
    LC5_A23 : LORAX = "1:MSW4R0C22,HHR44R0,PA5R0C16->LC5_A17|";
    LC8_A17 : LORAX = "1:MSW7R0C16,HHR25R0|2:PA3R0C12->LC7_A13,->LC6_A13|,2:PA3R0C22->LC4_A23||";
    LC2_A23 : LORAX = "1:MSW1R0C22,HHR5R0|2:PA17R0C12->LC7_A13,->LC6_A13|,2:PA17R0C16->LC1_A17,->LC5_A17||";
    LC1_A23 : LORAX = "1:MSW0R0C22,HHR18R0|2:PA18R0C12->LC7_A13,->LC6_A13|,2:PA18R0C16->LC1_A17||";
    LC4_A23 : LORAX = "1:MSW3R0C22,HHR7R0|2:PA15R0C12->LC5_A13,->LC3_A13,->LC4_A13|,2:PA15R0C16->LC8_A17,->LC4_A17,->LC6_A17,->LC7_A17,->LC5_A17||";
    LC2_A17 : LORAX = "1:MSW1R0C17,HHR16R0|2:PA20R0C12->LC8_A13,->LC6_A13|,2:PA20R0C22->LC4_A23||";
    LC1_A13 : LORAX = "1:MSW0R0C12,G39R0,PA20R0C23->LC3_A24,->LC8_A24,->LC1_A24|";
    OD4P1   : LORAX = "1:FB4->LC8_A17,->LC4_A17,->LC6_A17,->LC7_A17,->LC5_A17,->LC2_A23,->LC1_A23,->LC5_A13,->LC3_A13,->LC4_A13|2:CH0R2,PA19R2C19->LC4_C20||";
    LC3_A24 : LORAX = "1:MSW2R0C23,HHR15R0->OH2R0P72|";
    LC8_A24 : LORAX = "1:MSW7R0C23,HHR47R0->OH7R0P69|";
    LC1_A24 : LORAX = "1:MSW0R0C23,HHR20R0->OH0R0P73|";
	LC4_C20 : LORAX2 = "X, X, X, OD4P1";
	LC2_A13 : LORAX2 = "X, LC3_A13, LC4_A13, LC5_A13";
	LC5_A23 : LORAX2 = "X, X, LC2_A13, LC1_A23";
	LC1_A17 : LORAX2 = "LC2_A13, LC2_A23, LC1_A23, LC5_A17";
	LC3_A17 : LORAX2 = "X, LC1_A17, LC6_A17, LC7_A17";
	LC8_A17 : LORAX2 = "LC4_A23, LC3_A17, LC8_A17, LC4_A17";
	LC4_A17 : LORAX2 = "X, LC4_A23, LC3_A17, LC4_A17";
	LC6_A17 : LORAX2 = "LC4_A23, LC1_A17, LC6_A17, LC7_A17";
	LC7_A17 : LORAX2 = "X, LC4_A23, LC1_A17, LC7_A17";
	LC5_A17 : LORAX2 = "LC4_A23, LC5_A23, LC2_A23, LC5_A17";
	LC2_A23 : LORAX2 = "LC4_A23, LC2_A13, LC2_A23, LC1_A23";
	LC1_A23 : LORAX2 = "X, LC4_A23, LC2_A13, LC1_A23";
	LC5_A13 : LORAX2 = "LC4_A23, LC3_A13, LC4_A13, LC5_A13";
	LC3_A13 : LORAX2 = "X, LC4_A23, LC3_A13, LC4_A13";
	LC4_A13 : LORAX2 = "X, X, LC4_A23, LC4_A13";
	LC4_A23 : LORAX2 = "LC3_A23, LC2_A13, LC8_A17, LC2_A17";
	LC3_A23 : LORAX2 = "X, X, LC1_A23, LC2_A23";
	LC2_A17 : LORAX2 = "LC7_A17, LC6_A17, LC4_A17, LC5_A17";
	LC7_A13 : LORAX2 = "LC8_A17, LC5_A13, LC1_A23, LC2_A23";
	LC8_A13 : LORAX2 = "LC3_A13, LC4_A13, LC7_A13, LC2_A17";
	LC1_A13 : LORAX2 = "LC5_A13, LC8_A13, LC6_A13, LC1_A13";
	LC6_A13 : LORAX2 = "LC8_A17, LC2_A23, LC1_A23, LC2_A17";
	LC3_A24 : LORAX2 = "X, X, X, LC3_A24";
	LC8_A24 : LORAX2 = "X, X, X, LC8_A24";
	LC1_A24 : LORAX2 = "X, X, LC8_A24, LC1_A13";
END;