📄 clkdiv1000.rpt
字号:
Project Information e:\amj\eda\experiment\calendar_clock\clkdiv1000.rpt
MAX+plus II Compiler Report File
Version 10.1 06/12/2001
Compiled: 05/22/2005 23:05:12
Copyright (C) 1988-2001 Altera Corporation
Any megafunction design, and related net list (encrypted or decrypted),
support information, device programming or simulation file, and any other
associated documentation or information provided by Altera or a partner
under Altera's Megafunction Partnership Program may be used only to
program PLD devices (but not masked PLD devices) from Altera. Any other
use of such megafunction design, net list, support information, device
programming or simulation file, or any other related documentation or
information is prohibited for any other purpose, including, but not
limited to modification, reverse engineering, de-compiling, or use with
any other silicon devices, unless such use is explicitly licensed under
a separate agreement with Altera or a megafunction partner. Title to
the intellectual property, including patents, copyrights, trademarks,
trade secrets, or maskworks, embodied in any such megafunction design,
net list, support information, device programming or simulation file, or
any other related documentation or information provided by Altera or a
megafunction partner, remains with Altera, the megafunction partner, or
their respective licensors. No other licenses, including any licenses
needed under any third party's intellectual property, are provided herein.
***** Project compilation was successful
** DEVICE SUMMARY **
Chip/ Input Output Bidir Shareable
POF Device Pins Pins Pins LCs Expanders % Utilized
clkdiv1000
EPM7032LC44-6 1 11 0 18 0 56 %
User Pins: 1 11 0
Project Information e:\amj\eda\experiment\calendar_clock\clkdiv1000.rpt
** AUTO GLOBAL SIGNALS **
INFO: Signal 'clkin' chosen for auto global Clock
Project Information e:\amj\eda\experiment\calendar_clock\clkdiv1000.rpt
** FILE HIERARCHY **
|lpm_add_sub:62|
|lpm_add_sub:62|addcore:adder|
|lpm_add_sub:62|addcore:adder|addcore:adder1|
|lpm_add_sub:62|addcore:adder|addcore:adder0|
|lpm_add_sub:62|altshift:result_ext_latency_ffs|
|lpm_add_sub:62|altshift:carry_ext_latency_ffs|
|lpm_add_sub:62|altshift:oflow_ext_latency_ffs|
Device-Specific Information:e:\amj\eda\experiment\calendar_clock\clkdiv1000.rpt
clkdiv1000
***** Logic for device 'clkdiv1000' compiled without errors.
Device: EPM7032LC44-6
Device Options:
Turbo Bit = ON
Security Bit = OFF
R R
E E
S S c c c
E E o c o o
R R u l u u
V V n V G G G k G n n
E E t C N N N i N t t
D D 0 C D D D n D 8 5
-----------------------------------_
/ 6 5 4 3 2 1 44 43 42 41 40 |
count1 | 7 39 | count9
RESERVED | 8 38 | count4
RESERVED | 9 37 | count3
GND | 10 36 | count2
RESERVED | 11 35 | VCC
RESERVED | 12 EPM7032LC44-6 34 | count7
RESERVED | 13 33 | count6
RESERVED | 14 32 | RESERVED
VCC | 15 31 | RESERVED
RESERVED | 16 30 | GND
RESERVED | 17 29 | RESERVED
|_ 18 19 20 21 22 23 24 25 26 27 28 _|
------------------------------------
R R R R G V R c R R R
E E E E N C E l E E E
S S S S D C S k S S S
E E E E E o E E E
R R R R R u R R R
V V V V V t V V V
E E E E E E E E
D D D D D D D D
N.C. = No Connect. This pin has no internal connection to the device.
VCC = Dedicated power pin, which MUST be connected to VCC.
GND = Dedicated ground pin or unused dedicated input, which MUST be connected to GND.
RESERVED = Unused I/O pin, which MUST be left unconnected.
Device-Specific Information:e:\amj\eda\experiment\calendar_clock\clkdiv1000.rpt
clkdiv1000
** RESOURCE USAGE **
Shareable External
Logic Array Block Logic Cells I/O Pins Expanders Interconnect
A: LC1 - LC16 2/16( 12%) 2/16( 12%) 0/16( 0%) 1/36( 2%)
B: LC17 - LC32 16/16(100%) 9/16( 56%) 0/16( 0%) 17/36( 47%)
Total dedicated input pins used: 1/4 ( 25%)
Total I/O pins used: 11/32 ( 34%)
Total logic cells used: 18/32 ( 56%)
Total shareable expanders used: 0/32 ( 0%)
Total Turbo logic cells used: 18/32 ( 56%)
Total shareable expanders not available (n/a): 0/32 ( 0%)
Average fan-in: 8.50
Total fan-in: 153
Total input pins required: 1
Total output pins required: 11
Total bidirectional pins required: 0
Total logic cells required: 18
Total flipflops required: 11
Total product terms required: 32
Total logic cells lending parallel expanders: 0
Total shareable expanders in database: 0
Synthesized logic cells: 0/ 32 ( 0%)
Device-Specific Information:e:\amj\eda\experiment\calendar_clock\clkdiv1000.rpt
clkdiv1000
** INPUTS **
Shareable
Expanders Fan-In Fan-Out
Pin LC LAB Primitive Code Total Shared n/a INP FBK OUT FBK Name
43 - - INPUT G 0 0 0 0 0 0 0 clkin
Code:
s = Synthesized pin or logic cell
t = Turbo logic cell
+ = Synchronous flipflop
! = NOT gate push-back
r = Fitter-inserted logic cell
G = Global Source. Fan-out destinations counted here do not include destinations
that are driven using global routing resources. Refer to the Auto Global Signals,
Clock Signals, Clear Signals, Synchronous Load Signals, and Synchronous Clear Signals
Sections of this Report File for information on which signals' fan-outs are used as
Clock, Clear, Preset, Output Enable, and synchronous Load signals.
Device-Specific Information:e:\amj\eda\experiment\calendar_clock\clkdiv1000.rpt
clkdiv1000
** OUTPUTS **
Shareable
Expanders Fan-In Fan-Out
Pin LC LAB Primitive Code Total Shared n/a INP FBK OUT FBK Name
25 31 B FF + t 0 0 0 0 10 0 0 clkout
4 1 A FF + t 0 0 0 0 0 10 7 count0
7 4 A FF + t 0 0 0 0 1 9 7 count1
36 22 B FF + t 0 0 0 0 2 8 7 count2
37 21 B FF + t 0 0 0 0 11 8 7 count3
38 20 B FF + t 0 0 0 0 11 8 6 count4
40 18 B FF + t 0 0 0 0 11 8 5 count5
33 24 B FF + t 0 0 0 0 11 8 4 count6
34 23 B FF + t 0 0 0 0 11 8 3 count7
41 17 B FF + t 0 0 0 0 11 8 2 count8
39 19 B FF + t 0 0 0 0 11 8 1 count9
Code:
s = Synthesized pin or logic cell
t = Turbo logic cell
+ = Synchronous flipflop
! = NOT gate push-back
r = Fitter-inserted logic cell
Device-Specific Information:e:\amj\eda\experiment\calendar_clock\clkdiv1000.rpt
clkdiv1000
** BURIED LOGIC **
Shareable
Expanders Fan-In Fan-Out
Pin LC LAB Primitive Code Total Shared n/a INP FBK OUT FBK Name
(29) 27 B SOFT t 0 0 0 0 4 1 0 |lpm_add_sub:62|addcore:adder|addcore:adder0|result_node3
(32) 25 B SOFT t 0 0 0 0 5 1 0 |lpm_add_sub:62|addcore:adder|addcore:adder0|result_node4
(31) 26 B SOFT t 0 0 0 0 6 1 0 |lpm_add_sub:62|addcore:adder|addcore:adder0|result_node5
(28) 28 B SOFT t 0 0 0 0 7 1 0 |lpm_add_sub:62|addcore:adder|addcore:adder0|result_node6
(27) 29 B SOFT t 0 0 0 0 8 1 0 |lpm_add_sub:62|addcore:adder|addcore:adder0|result_node7
(26) 30 B SOFT t 0 0 0 0 9 1 0 |lpm_add_sub:62|addcore:adder|addcore:adder1|result_node0
(24) 32 B SOFT t 0 0 0 0 10 1 0 |lpm_add_sub:62|addcore:adder|addcore:adder1|result_node1
Code:
s = Synthesized pin or logic cell
t = Turbo logic cell
+ = Synchronous flipflop
! = NOT gate push-back
r = Fitter-inserted logic cell
Device-Specific Information:e:\amj\eda\experiment\calendar_clock\clkdiv1000.rpt
clkdiv1000
** LOGIC CELL INTERCONNECTIONS **
Logic Array Block 'A':
Logic cells placed in LAB 'A'
+--- LC1 count0
| +- LC4 count1
| |
| | Other LABs fed by signals
| | that feed LAB 'A'
LC | | | A B | Logic cells that feed LAB 'A':
LC1 -> * * | * * | <-- count0
Pin
43 -> - - | - - | <-- clkin
* = The logic cell or pin is an input to the logic cell (or LAB) through the PIA.
- = The logic cell or pin is not an input to the logic cell (or LAB).
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -