or1200_defines.v

一个开放的risc

// If you plan to run WB:RISC clock fixed to 1:1, disable
// both defines
//
// For WB:RISC 1:2 or 1:1, enable OR1200_CLKDIV_2_SUPPORTED
// and use clmode to set ratio
//
// For WB:RISC 1:4, 1:2 or 1:1, enable both defines and use
// clmode to set ratio
//
`define OR1200_CLKDIV_2_SUPPORTED
//`define OR1200_CLKDIV_4_SUPPORTED

//
// Type of register file RAM
//
// Memory macro w/ two ports (see or1200_tpram_32x32.v)
// `define OR1200_RFRAM_TWOPORT
//
// Memory macro dual port (see or1200_dpram_32x32.v)
`define OR1200_RFRAM_DUALPORT
//
// Generic (flip-flop based) register file (see or1200_rfram_generic.v)
//`define OR1200_RFRAM_GENERIC

//
// Type of mem2reg aligner to implement.
//
// Once OR1200_IMPL_MEM2REG2 yielded faster
// circuit, however with today tools it will
// most probably give you slower circuit.
//
`define OR1200_IMPL_MEM2REG1
//`define OR1200_IMPL_MEM2REG2

//
// ALUOPs
//
`define OR1200_ALUOP_WIDTH	4
`define OR1200_ALUOP_NOP	4'd4
/* Order defined by arith insns that have two source operands both in regs
   (see binutils/include/opcode/or32.h) */
`define OR1200_ALUOP_ADD	4'd0
`define OR1200_ALUOP_ADDC	4'd1
`define OR1200_ALUOP_SUB	4'd2
`define OR1200_ALUOP_AND	4'd3
`define OR1200_ALUOP_OR		4'd4
`define OR1200_ALUOP_XOR	4'd5
`define OR1200_ALUOP_MUL	4'd6
`define OR1200_ALUOP_SHROT	4'd8
`define OR1200_ALUOP_DIV	4'd9
`define OR1200_ALUOP_DIVU	4'd10
/* Order not specifically defined. */
`define OR1200_ALUOP_IMM	4'd11
`define OR1200_ALUOP_MOVHI	4'd12
`define OR1200_ALUOP_COMP	4'd13
`define OR1200_ALUOP_MTSR	4'd14
`define OR1200_ALUOP_MFSR	4'd15

//
// MACOPs
//
`define OR1200_MACOP_WIDTH	2
`define OR1200_MACOP_NOP	2'b00
`define OR1200_MACOP_MAC	2'b01
`define OR1200_MACOP_MSB	2'b10

//
// Shift/rotate ops
//
`define OR1200_SHROTOP_WIDTH	2
`define OR1200_SHROTOP_NOP	2'd0
`define OR1200_SHROTOP_SLL	2'd0
`define OR1200_SHROTOP_SRL	2'd1
`define OR1200_SHROTOP_SRA	2'd2
`define OR1200_SHROTOP_ROR	2'd3

// Execution cycles per instruction
`define OR1200_MULTICYCLE_WIDTH	2
`define OR1200_ONE_CYCLE		2'd0
`define OR1200_TWO_CYCLES		2'd1

// Operand MUX selects
`define OR1200_SEL_WIDTH		2
`define OR1200_SEL_RF			2'd0
`define OR1200_SEL_IMM			2'd1
`define OR1200_SEL_EX_FORW		2'd2
`define OR1200_SEL_WB_FORW		2'd3

//
// BRANCHOPs
//
`define OR1200_BRANCHOP_WIDTH		3
`define OR1200_BRANCHOP_NOP		3'd0
`define OR1200_BRANCHOP_J		3'd1
`define OR1200_BRANCHOP_JR		3'd2
`define OR1200_BRANCHOP_BAL		3'd3
`define OR1200_BRANCHOP_BF		3'd4
`define OR1200_BRANCHOP_BNF		3'd5
`define OR1200_BRANCHOP_RFE		3'd6

//
// LSUOPs
//
// Bit 0: sign extend
// Bits 1-2: 00 doubleword, 01 byte, 10 halfword, 11 singleword
// Bit 3: 0 load, 1 store
`define OR1200_LSUOP_WIDTH		4
`define OR1200_LSUOP_NOP		4'b0000
`define OR1200_LSUOP_LBZ		4'b0010
`define OR1200_LSUOP_LBS		4'b0011
`define OR1200_LSUOP_LHZ		4'b0100
`define OR1200_LSUOP_LHS		4'b0101
`define OR1200_LSUOP_LWZ		4'b0110
`define OR1200_LSUOP_LWS		4'b0111
`define OR1200_LSUOP_LD		4'b0001
`define OR1200_LSUOP_SD		4'b1000
`define OR1200_LSUOP_SB		4'b1010
`define OR1200_LSUOP_SH		4'b1100
`define OR1200_LSUOP_SW		4'b1110

// FETCHOPs
`define OR1200_FETCHOP_WIDTH		1
`define OR1200_FETCHOP_NOP		1'b0
`define OR1200_FETCHOP_LW		1'b1

//
// Register File Write-Back OPs
//
// Bit 0: register file write enable
// Bits 2-1: write-back mux selects
`define OR1200_RFWBOP_WIDTH		3
`define OR1200_RFWBOP_NOP		3'b000
`define OR1200_RFWBOP_ALU		3'b001
`define OR1200_RFWBOP_LSU		3'b011
`define OR1200_RFWBOP_SPRS		3'b101
`define OR1200_RFWBOP_LR		3'b111

// Compare instructions
`define OR1200_COP_SFEQ       3'b000
`define OR1200_COP_SFNE       3'b001
`define OR1200_COP_SFGT       3'b010
`define OR1200_COP_SFGE       3'b011
`define OR1200_COP_SFLT       3'b100
`define OR1200_COP_SFLE       3'b101
`define OR1200_COP_X          3'b111
`define OR1200_SIGNED_COMPARE 'd3
`define OR1200_COMPOP_WIDTH	4

//
// TAGs for instruction bus
//
`define OR1200_ITAG_IDLE	4'h0	// idle bus
`define	OR1200_ITAG_NI		4'h1	// normal insn
`define OR1200_ITAG_BE		4'hb	// Bus error exception
`define OR1200_ITAG_PE		4'hc	// Page fault exception
`define OR1200_ITAG_TE		4'hd	// TLB miss exception

//
// TAGs for data bus
//
`define OR1200_DTAG_IDLE	4'h0	// idle bus
`define	OR1200_DTAG_ND		4'h1	// normal data
`define OR1200_DTAG_AE		4'ha	// Alignment exception
`define OR1200_DTAG_BE		4'hb	// Bus error exception
`define OR1200_DTAG_PE		4'hc	// Page fault exception
`define OR1200_DTAG_TE		4'hd	// TLB miss exception


//////////////////////////////////////////////
//
// ORBIS32 ISA specifics
//

// SHROT_OP position in machine word
`define OR1200_SHROTOP_POS		7:6

// ALU instructions multicycle field in machine word
`define OR1200_ALUMCYC_POS		9:8

//
// Instruction opcode groups (basic)
//
`define OR1200_OR32_J                 6'b000000
`define OR1200_OR32_JAL               6'b000001
`define OR1200_OR32_BNF               6'b000011
`define OR1200_OR32_BF                6'b000100
`define OR1200_OR32_NOP               6'b000101
`define OR1200_OR32_MOVHI             6'b000110
`define OR1200_OR32_XSYNC             6'b001000
`define OR1200_OR32_RFE               6'b001001
/* */
`define OR1200_OR32_JR                6'b010001
`define OR1200_OR32_JALR              6'b010010
`define OR1200_OR32_MACI              6'b010011
/* */
`define OR1200_OR32_LWZ               6'b100001
`define OR1200_OR32_LBZ               6'b100011
`define OR1200_OR32_LBS               6'b100100
`define OR1200_OR32_LHZ               6'b100101
`define OR1200_OR32_LHS               6'b100110
`define OR1200_OR32_ADDI              6'b100111
`define OR1200_OR32_ADDIC             6'b101000
`define OR1200_OR32_ANDI              6'b101001
`define OR1200_OR32_ORI               6'b101010
`define OR1200_OR32_XORI              6'b101011
`define OR1200_OR32_MULI              6'b101100
`define OR1200_OR32_MFSPR             6'b101101
`define OR1200_OR32_SH_ROTI 	      6'b101110
`define OR1200_OR32_SFXXI             6'b101111
/* */
`define OR1200_OR32_MTSPR             6'b110000
`define OR1200_OR32_MACMSB            6'b110001
/* */
`define OR1200_OR32_SW                6'b110101
`define OR1200_OR32_SB                6'b110110
`define OR1200_OR32_SH                6'b110111
`define OR1200_OR32_ALU               6'b111000
`define OR1200_OR32_SFXX              6'b111001


/////////////////////////////////////////////////////
//
// Exceptions
//

//
// Exception vectors per OR1K architecture:
// 0xP0000100 - reset
// 0xP0000200 - bus error
// ... etc
// where P represents exception prefix.
//
// Exception vectors can be customized as per
// the following formula:
// 0xPMMMMNVV - exception N
//
// P represents exception prefix
// MMMM represents middle part that is usually 16 bits
//   wide and starts with all bits zero
// N represents exception N
// VV represents length of the individual vector space,
//   usually it is 8 bits wide and starts with all bits zero
//

//
// MMMM and VV parts
//
// Sum of these two defines needs to be 24
// (assuming N and P width are each 4 bits)
//
`define OR1200_EXCEPT_MMMM		16'h0000
`define OR1200_EXCEPT_VV		8'h00

//
// N part width
//
`define OR1200_EXCEPT_WIDTH 4

//
// Definition of exception vectors
//
// To avoid implementation of a certain exception,
// simply comment out corresponding line
//
`define OR1200_EXCEPT_UNUSED		`OR1200_EXCEPT_WIDTH'hf
`define OR1200_EXCEPT_TRAP		`OR1200_EXCEPT_WIDTH'he
`define OR1200_EXCEPT_BREAK		`OR1200_EXCEPT_WIDTH'hd
`define OR1200_EXCEPT_SYSCALL		`OR1200_EXCEPT_WIDTH'hc
`define OR1200_EXCEPT_RANGE		`OR1200_EXCEPT_WIDTH'hb
`define OR1200_EXCEPT_ITLBMISS		`OR1200_EXCEPT_WIDTH'ha
`define OR1200_EXCEPT_DTLBMISS		`OR1200_EXCEPT_WIDTH'h9
`define OR1200_EXCEPT_INT		`OR1200_EXCEPT_WIDTH'h8
`define OR1200_EXCEPT_ILLEGAL		`OR1200_EXCEPT_WIDTH'h7
`define OR1200_EXCEPT_ALIGN		`OR1200_EXCEPT_WIDTH'h6
`define OR1200_EXCEPT_TICK		`OR1200_EXCEPT_WIDTH'h5
`define OR1200_EXCEPT_IPF		`OR1200_EXCEPT_WIDTH'h4
`define OR1200_EXCEPT_DPF		`OR1200_EXCEPT_WIDTH'h3
`define OR1200_EXCEPT_BUSERR		`OR1200_EXCEPT_WIDTH'h2
`define OR1200_EXCEPT_RESET		`OR1200_EXCEPT_WIDTH'h1
`define OR1200_EXCEPT_NONE		`OR1200_EXCEPT_WIDTH'h0


/////////////////////////////////////////////////////
//
// SPR groups
//

// Bits that define the group
`define OR1200_SPR_GROUP_BITS	15:11

// Width of the group bits
`define OR1200_SPR_GROUP_WIDTH 	5

// Bits that define offset inside the group
`define OR1200_SPR_OFS_BITS 10:0

// List of groups
`define OR1200_SPR_GROUP_SYS	5'd00
`define OR1200_SPR_GROUP_DMMU	5'd01
`define OR1200_SPR_GROUP_IMMU	5'd02
`define OR1200_SPR_GROUP_DC	5'd03
`define OR1200_SPR_GROUP_IC	5'd04
`define OR1200_SPR_GROUP_MAC	5'd05
`define OR1200_SPR_GROUP_DU	5'd06
`define OR1200_SPR_GROUP_PM	5'd08
`define OR1200_SPR_GROUP_PIC	5'd09
`define OR1200_SPR_GROUP_TT	5'd10


/////////////////////////////////////////////////////
//
// System group
//

//
// System registers
//
`define OR1200_SPR_CFGR		7'd0
`define OR1200_SPR_RF		6'd32	// 1024 >> 5
`define OR1200_SPR_NPC		11'd16
`define OR1200_SPR_SR		11'd17
`define OR1200_SPR_PPC		11'd18
`define OR1200_SPR_EPCR		11'd32
`define OR1200_SPR_EEAR		11'd48
`define OR1200_SPR_ESR		11'd64

//
// SR bits
//
`define OR1200_SR_WIDTH 16
`define OR1200_SR_SM   0
`define OR1200_SR_TEE  1
`define OR1200_SR_IEE  2
`define OR1200_SR_DCE  3
`define OR1200_SR_ICE  4
`define OR1200_SR_DME  5
`define OR1200_SR_IME  6
`define OR1200_SR_LEE  7
`define OR1200_SR_CE   8
`define OR1200_SR_F    9
`define OR1200_SR_CY   10	// Unused
`define OR1200_SR_OV   11	// Unused
`define OR1200_SR_OVE  12	// Unused
`define OR1200_SR_DSX  13	// Unused
`define OR1200_SR_EPH  14
`define OR1200_SR_FO   15
`define OR1200_SR_CID  31:28	// Unimplemented

// Bits that define offset inside the group
`define OR1200_SPROFS_BITS 10:0


/////////////////////////////////////////////////////
//
// Power Management (PM)
//

// Define it if you want PM implemented
`define OR1200_PM_IMPLEMENTED

// Bit positions inside PMR (don't change)
`define OR1200_PM_PMR_SDF 3:0
`define OR1200_PM_PMR_DME 4
`define OR1200_PM_PMR_SME 5
`define OR1200_PM_PMR_DCGE 6
`define OR1200_PM_PMR_UNUSED 31:7

// PMR offset inside PM group of registers
`define OR1200_PM_OFS_PMR 11'b0

// PM group
`define OR1200_SPRGRP_PM 5'd8

// Define if PMR can be read/written at any address inside PM group
`define OR1200_PM_PARTIAL_DECODING

// Define if reading PMR is allowed
`define OR1200_PM_READREGS

// Define if unused PMR bits should be zero
`define OR1200_PM_UNUSED_ZERO


/////////////////////////////////////////////////////
//
// Debug Unit (DU)
//

// Define it if you want DU implemented
`define OR1200_DU_IMPLEMENTED

// Define if you want trace buffer
// (for now only available for Xilinx Virtex FPGAs)
`ifdef OR1200_ASIC
`else
`define OR1200_DU_TB_IMPLEMENTED
`endif

// Address offsets of DU registers inside DU group
`define OR1200_DU_OFS_DMR1 11'd16
`define OR1200_DU_OFS_DMR2 11'd17
`define OR1200_DU_OFS_DSR 11'd20
`define OR1200_DU_OFS_DRR 11'd21
`define OR1200_DU_OFS_TBADR 11'h0ff
`define OR1200_DU_OFS_TBIA 11'h1xx
`define OR1200_DU_OFS_TBIM 11'h2xx
`define OR1200_DU_OFS_TBAR 11'h3xx
`define OR1200_DU_OFS_TBTS 11'h4xx

// Position of offset bits inside SPR address
`define OR1200_DUOFS_BITS 10:0

// Define if you want these DU registers to be implemented
`define OR1200_DU_DMR1
`define OR1200_DU_DMR2
`define OR1200_DU_DSR
`define OR1200_DU_DRR

// DMR1 bits
`define OR1200_DU_DMR1_ST 22

// DSR bits
`define OR1200_DU_DSR_WIDTH	14
`define OR1200_DU_DSR_RSTE	0
`define OR1200_DU_DSR_BUSEE	1
`define OR1200_DU_DSR_DPFE	2
`define OR1200_DU_DSR_IPFE	3
`define OR1200_DU_DSR_TTE	4
`define OR1200_DU_DSR_AE	5
`define OR1200_DU_DSR_IIE	6
`define OR1200_DU_DSR_IE	7
`define OR1200_DU_DSR_DME	8
`define OR1200_DU_DSR_IME	9
`define OR1200_DU_DSR_RE	10
`define OR1200_DU_DSR_SCE	11
`define OR1200_DU_DSR_BE	12
`define OR1200_DU_DSR_TE	13

// DRR bits
`define OR1200_DU_DRR_RSTE	0
`define OR1200_DU_DRR_BUSEE	1
`define OR1200_DU_DRR_DPFE	2
`define OR1200_DU_DRR_IPFE	3
`define OR1200_DU_DRR_TTE	4
`define OR1200_DU_DRR_AE	5
`define OR1200_DU_DRR_IIE	6
`define OR1200_DU_DRR_IE	7
`define OR1200_DU_DRR_DME	8
`define OR1200_DU_DRR_IME	9
`define OR1200_DU_DRR_RE	10
`define OR1200_DU_DRR_SCE	11
`define OR1200_DU_DRR_BE	12
`define OR1200_DU_DRR_TE	13

// Define if reading DU regs is allowed
`define OR1200_DU_READREGS

// Define if unused DU registers bits should be zero
`define OR1200_DU_UNUSED_ZERO

// DU operation commands
`define OR1200_DU_OP_READSPR 	3'd4
`define OR1200_DU_OP_WRITESPR	3'd5

// Define if IF/LSU status is not needed by devel i/f
`define OR1200_DU_STATUS_UNIMPLEMENTED

/////////////////////////////////////////////////////
//
// Programmable Interrupt Controller (PIC)
//

// Define it if you want PIC implemented
`define OR1200_PIC_IMPLEMENTED

// Define number of interrupt inputs (2-31)
`define OR1200_PIC_INTS 20

// Address offsets of PIC registers inside PIC group
`define OR1200_PIC_OFS_PICMR 2'd0
`define OR1200_PIC_OFS_PICSR 2'd2

// Position of offset bits inside SPR address
`define OR1200_PICOFS_BITS 1:0

// Define if you want these PIC registers to be implemented
`define OR1200_PIC_PICMR
`define OR1200_PIC_PICSR

// Define if reading PIC registers is allowed
`define OR1200_PIC_READREGS

// Define if unused PIC register bits should be zero
`define OR1200_PIC_UNUSED_ZERO


/////////////////////////////////////////////////////
//
// Tick Timer (TT)
//

// Define it if you want TT implemented
`define OR1200_TT_IMPLEMENTED

// Address offsets of TT registers inside TT group
`define OR1200_TT_OFS_TTMR 1'd0
`define OR1200_TT_OFS_TTCR 1'd1

// Position of offset bits inside SPR group
`define OR1200_TTOFS_BITS 0

// Define if you want these TT registers to be implemented
`define OR1200_TT_TTMR
`define OR1200_TT_TTCR

// TTMR bits
`define OR1200_TT_TTMR_TP 27:0
`define OR1200_TT_TTMR_IP 28
`define OR1200_TT_TTMR_IE 29