📄 sellmachine.pin
字号:
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
N.C. = No Connect. This pin has no internal connection to the device.
VCCINT = Dedicated power pin, which MUST be connected to VCC (2.5 volts).
VCCIO1 = Dedicated power pin, which MUST be connected to VCC (3.3 volts).
VCCIO2 = Dedicated power pin, which MUST be connected to VCC (3.3 volts).
GND = Dedicated ground pin or unused dedicated input, which MUST be connected to GND.
GND* = These I/O pins can either be left unconnected or connected to GND. Connecting these pins to GND will improve the device's immunity to noise.
RESERVED = Unused I/O pin, which MUST be left unconnected.
----------------------------------------------------------------------------
CHIP "sellmachine" ASSIGNED TO AN EPM7128BTC100-4
A1 : 1
START : 2
VCCIO1 : 3
TDI : 4
GND* : 5
GND* : 6
GND* : 7
GND* : 8
GND* : 9
GND* : 10
GND : 11
GND* : 12
GND* : 13
GND* : 14
TMS : 15
GND* : 16
GND* : 17
VCCIO1 : 18
GND* : 19
GND* : 20
GND* : 21
GND* : 22
GND* : 23
GND* : 24
GND* : 25
GND : 26
GND* : 27
GND* : 28
GND* : 29
GND* : 30
GND* : 31
GND* : 32
GND* : 33
VCCIO1 : 34
LAMP0 : 35
GND* : 36
GND* : 37
GND : 38
VCCINT : 39
TEST2 : 40
TEST3 : 41
GND* : 42
GND : 43
TEST0 : 44
TEST1 : 45
TEST4 : 46
GND* : 47
GND* : 48
GND* : 49
GND* : 50
VCCIO2 : 51
GND* : 52
GND* : 53
GND* : 54
GND* : 55
GND* : 56
GND* : 57
GND* : 58
GND : 59
GND* : 60
GND* : 61
TCK : 62
GND* : 63
LAMP1 : 64
GND* : 65
VCCIO2 : 66
GND* : 67
GND* : 68
GND* : 69
GND* : 70
GND* : 71
GND* : 72
TDO : 73
GND : 74
OUTA1 : 75
OUTA4 : 76
OUTA8 : 77
REJECTA : 78
LAMP2 : 79
REJECTCOIN : 80
LAMP3 : 81
VCCIO2 : 82
TEST7 : 83
TEST5 : 84
TEST6 : 85
GND : 86
CANCEL : 87
GND : 88
GND : 89
CLK1K : 90
VCCINT : 91
GND* : 92
GND* : 93
GND* : 94
GND : 95
COIN1 : 96
COIN2 : 97
A8 : 98
A4 : 99
COIN5 : 100
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -