📄 pps_ex.vhd
字号:
-------------------------------------------------------------------------------------- ---- Copyright (c) 2004, Hangouet Samuel ---- , Jan Sebastien ---- , Mouton Louis-Marie ---- , Schneider Olivier all rights reserved ---- ---- This file is part of miniMIPS. ---- ---- miniMIPS is free software; you can redistribute it and/or modify ---- it under the terms of the GNU General Public License as published by ---- the Free Software Foundation; either version 2 of the License, or ---- (at your option) any later version. ---- ---- miniMIPS is distributed in the hope that it will be useful, ---- but WITHOUT ANY WARRANTY; without even the implied warranty of ---- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ---- GNU General Public License for more details. ---- ---- You should have received a copy of the GNU General Public License ---- along with miniMIPS; if not, write to the Free Software ---- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ---- ---------------------------------------------------------------------------------------- If you encountered any problem, please contact :---- lmouton@enserg.fr-- oschneid@enserg.fr-- shangoue@enserg.fr------------------------------------------------------------------------------ ---- ---- Processor miniMIPS : Execution stage ---- ---- ---- ---- Authors : Hangouet Samuel ---- Jan S閎astien ---- Mouton Louis-Marie ---- Schneider Olivier ---- ---- june 2003 ----------------------------------------------------------------------------library IEEE;use IEEE.std_logic_1164.all;use IEEE.numeric_std.all;library work;use work.pack_mips.all;use work.alu;entity pps_ex isport( clock : in std_logic; reset : in std_logic; stop_all : in std_logic; -- Unconditionnal locking of outputs clear : in std_logic; -- Clear the pipeline stage -- Datas from DI stage DI_bra : in std_logic; -- Branch instruction DI_link : in std_logic; -- Branch with link DI_op1 : in bus32; -- Operand 1 for alu DI_op2 : in bus32; -- Operand 2 for alu DI_code_ual : in alu_ctrl_type; -- Alu operation DI_offset : in bus32; -- Offset for address calculation DI_adr_reg_dest : in adr_reg_type; -- Destination register address for the result DI_ecr_reg : in std_logic; -- Effective writing of the result DI_mode : in std_logic; -- Address mode (relative to pc ou index by a register) DI_op_mem : in std_logic; -- Memory operation DI_r_w : in std_logic; -- Type of memory operation (read or write) DI_adr : in bus32; -- Instruction address DI_exc_cause : in bus32; -- Potential cause exception DI_level : in level_type; -- Availability stage of the result for bypassing DI_it_ok : in std_logic; -- Allow hardware interruptions -- Synchronous outputs to MEM stage EX_adr : out bus32; -- Instruction address EX_bra_confirm : out std_logic; -- Branch execution confirmation EX_data_ual : out bus32; -- Ual result EX_adresse : out bus32; -- Address calculation result EX_adr_reg_dest : out adr_reg_type; -- Destination register for the result EX_ecr_reg : out std_logic; -- Effective writing of the result EX_op_mem : out std_logic; -- Memory operation needed EX_r_w : out std_logic; -- Type of memory operation (read or write) EX_exc_cause : out bus32; -- Potential cause exception EX_level : out level_type; -- Availability stage of result for bypassing EX_it_ok : out std_logic -- Allow hardware interruptions);end entity;architecture rtl of pps_ex iscomponent alu port ( clock : in bus1; reset : in bus1; op1 : in bus32; -- Operand 1 op2 : in bus32; -- Operand 2 ctrl : in alu_ctrl_type; -- Operation res : out bus32; -- Result overflow : out bus1 -- Overflow ); end component; signal res_ual : bus32; -- Alu result output signal base_adr : bus32; -- Output of the address mode mux selection signal pre_ecr_reg : std_logic; -- Output of mux selection for writing command to register signal pre_data_ual : bus32; -- Mux selection of the data to write signal pre_bra_confirm : std_logic; -- Result of the test in alu when branch instruction signal pre_exc_cause : bus32; -- Preparation of the exception detection signal signal overflow_ual : std_logic; -- Dectection of the alu overflowbegin -- Alu instantiation U1_alu : alu port map (clock => clock, reset => reset, op1=>DI_op1, op2=>DI_op2, ctrl=>DI_code_ual, res=>res_ual, overflow=>overflow_ual); -- Calculation of the future outputs base_adr <= DI_op1 when DI_mode='0' else DI_adr; pre_ecr_reg <= DI_ecr_reg when DI_link='0' else pre_bra_confirm; pre_data_ual <= res_ual when DI_link='0' else bus32(unsigned(DI_adr) + 4); pre_bra_confirm <= DI_bra and res_ual(0); pre_exc_cause <= DI_exc_cause when DI_exc_cause/=IT_NOEXC else IT_OVERF when overflow_ual='1' else IT_NOEXC; -- Set the synchronous outputs process(clock) is begin if clock='1' and clock'event then if reset='1' then EX_adr <= (others => '0'); EX_bra_confirm <= '0'; EX_data_ual <= (others => '0'); EX_adresse <= (others => '0'); EX_adr_reg_dest <= (others => '0'); EX_ecr_reg <= '0'; EX_op_mem <= '0'; EX_r_w <= '0'; EX_exc_cause <= IT_NOEXC; EX_level <= LVL_DI; EX_it_ok <= '0'; elsif stop_all = '0' then if clear = '1' then -- Clear the stage EX_adr <= DI_adr; EX_bra_confirm <= '0'; EX_data_ual <= (others => '0'); EX_adresse <= (others => '0'); EX_adr_reg_dest <= (others => '0'); EX_ecr_reg <= '0'; EX_op_mem <= '0'; EX_r_w <= '0'; EX_exc_cause <= IT_NOEXC; EX_level <= LVL_DI; EX_it_ok <= '0'; else -- Normal evolution EX_adr <= DI_adr; EX_bra_confirm <= pre_bra_confirm; EX_data_ual <= pre_data_ual; EX_adr_reg_dest <= DI_adr_reg_dest; EX_ecr_reg <= pre_ecr_reg; EX_op_mem <= DI_op_mem; EX_r_w <= DI_r_w; EX_exc_cause <= pre_exc_cause; EX_level <= DI_level; EX_it_ok <= DI_it_ok; EX_adresse <= bus32(unsigned(DI_offset) + unsigned(base_adr)); end if; end if; end if; end process;end architecture;⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -