control.fit

自动打铃系统

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 11/07/2005 22:49:00      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "control"
BEGIN

    DEVICE = "EP1K10TC100-1";

    "begend"                       : INPUT_PIN  = 40     ;
    "enter"                        : INPUT_PIN  = 39     ;
    "keyup"                        : INPUT_PIN  = 90     ;
    "reset"                        : INPUT_PIN  = 38     ;
    "hourhset0"                    : OUTPUT_PIN = 8      ;
    "hourhset1"                    : OUTPUT_PIN = 71     ;
    "hourlset0"                    : OUTPUT_PIN = 14     ;
    "hourlset1"                    : OUTPUT_PIN = 13     ;
    "hourlset2"                    : OUTPUT_PIN = 15     ;
    "hourlset3"                    : OUTPUT_PIN = 16     ;
    "minhset0"                     : OUTPUT_PIN = 9      ;
    "minhset1"                     : OUTPUT_PIN = 5      ;
    "minhset2"                     : OUTPUT_PIN = 10     ;
    "minlset0"                     : OUTPUT_PIN = 23     ;
    "minlset1"                     : OUTPUT_PIN = 19     ;
    "minlset2"                     : OUTPUT_PIN = 21     ;
    "minlset3"                     : OUTPUT_PIN = 22     ;
    "sechset0"                     : OUTPUT_PIN = 49     ;
    "sechset1"                     : OUTPUT_PIN = 70     ;
    "sechset2"                     : OUTPUT_PIN = 68     ;
    "seclset0"                     : OUTPUT_PIN = 6      ;
    "seclset1"                     : OUTPUT_PIN = 69     ;
    "seclset2"                     : OUTPUT_PIN = 7      ;
    "seclset3"                     : OUTPUT_PIN = 34     ;
    "settime"                      : OUTPUT_PIN = 20     ;
    "adjsta~1"                     : LOCATION   = LC4_A14;
    "adjsta~2"                     : LOCATION   = LC2_A14;
    "adjsta~3"                     : LOCATION   = LC1_A13;
    "adjsta~4"                     : LOCATION   = LC3_A19;
    "adjsta~5"                     : LOCATION   = LC4_A19;
    "adjsta~6"                     : LOCATION   = LC1_B20;
    "adjsta~7"                     : LOCATION   = LC3_A14;
    "|LPM_ADD_SUB:247|addcore:adder|:59" : LOCATION   = LC4_B15;
    "|LPM_ADD_SUB:300|addcore:adder|:59" : LOCATION   = LC2_C13;
    "|LPM_ADD_SUB:353|addcore:adder|:59" : LOCATION   = LC7_A13;
    ":26"                          : LOCATION   = LC1_C14;  -- setmark
    ":27"                          : LOCATION   = LC1_A14;  -- hourhigh1
    ":28"                          : LOCATION   = LC8_A14;  -- hourhigh0
    ":29"                          : LOCATION   = LC7_B15;  -- hourlow3
    ":30"                          : LOCATION   = LC5_B15;  -- hourlow2
    ":31"                          : LOCATION   = LC1_B15;  -- hourlow1
    ":32"                          : LOCATION   = LC3_B15;  -- hourlow0
    ":33"                          : LOCATION   = LC8_A19;  -- minhigh2
    ":34"                          : LOCATION   = LC1_A19;  -- minhigh1
    ":35"                          : LOCATION   = LC7_A19;  -- minhigh0
    ":36"                          : LOCATION   = LC5_C13;  -- minlow3
    ":37"                          : LOCATION   = LC4_C13;  -- minlow2
    ":38"                          : LOCATION   = LC1_C13;  -- minlow1
    ":39"                          : LOCATION   = LC7_C13;  -- minlow0
    ":40"                          : LOCATION   = LC7_A5 ;  -- sechigh2
    ":41"                          : LOCATION   = LC3_A5 ;  -- sechigh1
    ":42"                          : LOCATION   = LC1_A5 ;  -- sechigh0
    ":43"                          : LOCATION   = LC8_A13;  -- seclow3
    ":44"                          : LOCATION   = LC3_A13;  -- seclow2
    ":45"                          : LOCATION   = LC5_A13;  -- seclow1
    ":46"                          : LOCATION   = LC2_A13;  -- seclow0
    "~453~1"                       : LOCATION   = LC2_A19;
    "~453~2"                       : LOCATION   = LC6_A13;
    "~516~1"                       : LOCATION   = LC4_A13;
    "~600~1"                       : LOCATION   = LC5_A19;
    "~663~1"                       : LOCATION   = LC6_A19;
    "~747~1"                       : LOCATION   = LC2_B15;

END;

INTERNAL_INFO "control"
BEGIN
	DEVICE = EP1K10TC100-1;
    LC2_A14 : LORAX = "1:MSW2R0C12,HHR3R0,PA19R0C12->LC6_A13|";
    LC1_A13 : LORAX = "1:MSW0R0C12,G39R0,PA11R0C13->LC2_A14|";
    LC3_A19 : LORAX = "1:MSW2R0C18,G12R0,PA1R0C12->LC1_A13,->LC6_A13,->LC4_A13|";
    LC1_B20 : LORAX = "1:MSW0R1C19|2:V2C19,G38R0,PA0R0C18->LC4_A19,->LC2_A19,->LC5_A19,->LC6_A19|,2:HHR23R1,PA1R1C14->LC2_B15||";
    LC3_A14 : LORAX = "1:MSW3R0C12|2:HHR9R0,PA13R0C18->LC2_A19,->LC5_A19,->LC6_A19|,2:V9C12,G21R1|3:PA12R1C14->LC2_B15|,3:PA12R1C19->LC1_B20|||";
    OD3P40  : LORAX = "1:FB3->LC1_C14|";
    OD5P39  : LORAX = "1:FB5->LC4_A14,->LC2_A14,->LC1_A13,->LC3_A19,->LC4_A19,->LC1_B20,->LC3_A14|";
    OD4P90  : LORAX = "1:FB4->LC1_A14,->LC8_A14,->LC7_B15,->LC5_B15,->LC1_B15,->LC3_B15,->LC8_A19,->LC1_A19,->LC7_A19,->LC5_C13,->LC4_C13,->LC1_C13,->LC7_C13,->LC7_A5,->LC3_A5,->LC1_A5,->LC8_A13,->LC3_A13,->LC5_A13,->LC2_A13|";
    OD2P38  : LORAX = "1:FB2->LC4_A14,->LC2_A14,->LC1_A13,->LC3_A19,->LC4_A19,->LC1_B20,->LC3_A14,->LC1_C14,->LC1_A14,->LC8_A14,->LC7_B15,->LC5_B15,->LC1_B15,->LC3_B15,->LC8_A19,->LC1_A19,->LC7_A19,->LC5_C13,->LC4_C13,->LC1_C13,->LC7_C13,->LC7_A5,->LC3_A5,->LC1_A5,->LC8_A13,->LC3_A13,->LC5_A13,->LC2_A13|";
    LC1_C14 : LORAX = "1:MSW1R2C12,HHR8R2->OH1R2P20|";
    LC1_A14 : LORAX = "1:MSW0R0C13,G44R0->OH8R0P71|";
    LC8_A14 : LORAX = "1:MSW4R0C12,HHR41R0->OH4R0P8|";
    LC7_B15 : LORAX = "1:MSW6R1C15,HHR26R1->OH6R1P16|";
    LC5_B15 : LORAX = "1:MSW4R1C15,HHR38R1->OH4R1P15|";
    LC1_B15 : LORAX = "1:MSW0R1C15,HHR19R1->OH0R1P13|";
    LC3_B15 : LORAX = "1:MSW2R1C15,HHR14R1->OH2R1P14|";
    LC8_A19 : LORAX = "1:MSW7R0C19,HHR35R0->OH7R0P10|";
    LC1_A19 : LORAX = "1:MSW0R0C19,HHR23R0->OH0R0P5|";
    LC7_A19 : LORAX = "1:MSW6R0C18,HHR29R0->OH6R0P9|";
    LC5_C13 : LORAX = "1:MSW4R2C12,HHR41R2->OH4R2P22|";
    LC4_C13 : LORAX = "1:MSW3R2C13,G9R2->OH3R2P21|";
    LC1_C13 : LORAX = "1:MSW0R2C13,HHR23R2->OH0R2P19|";
    LC7_C13 : LORAX = "1:MSW6R2C13,HHR32R2->OH6R2P23|";
    LC7_A5  : LORAX = "1:MSW6R0C4,HHL31R0->OH14R0P68|";
    LC3_A5  : LORAX = "1:MSW2R0C4,HHL0R0->OH10R0P70|";
    LC1_A5  : LORAX = "1:MSW0R0C5,V1C5->OV2C5P49|";
    LC8_A13 : LORAX = "1:MSW7R0C13,V22C13->OV2C13P34|";
    LC3_A13 : LORAX = "1:MSW2R0C13,G2R0->OH2R0P7|";
    LC5_A13 : LORAX = "1:MSW4R0C13,G93R0->OH12R0P69|";
    LC2_A13 : LORAX = "1:MSW1R0C13,G29R0->OH1R0P6|";
    LC2_A19 : LORAX = "1:MSW1R0C19,HHR11R0,PA4R0C12->LC6_A13,->LC4_A13|";
    LC4_A13 : LORAX = "1:MSW3R0C13,G9R0,PA12R0C4->LC7_A5,->LC3_A5,->LC1_A5|";
    LC5_A19 : LORAX = "1:MSW4R0C19,V13C19,HHR36R2,PA19R2C12->LC5_C13,->LC4_C13,->LC1_C13,->LC7_C13|";
	LC2_A14 : LORAX2 = "X, X, X, LC1_A13";
	LC1_A13 : LORAX2 = "X, X, X, LC3_A19";
	LC3_A19 : LORAX2 = "X, X, X, LC4_A19";
	LC4_A19 : LORAX2 = "X, X, X, LC1_B20";
	LC1_B20 : LORAX2 = "X, X, X, LC3_A14";
	LC3_A14 : LORAX2 = "X, X, LC4_A14, LC2_A14";
	LC4_B15 : LORAX2 = "X, X, LC1_B15, LC3_B15";
	LC2_C13 : LORAX2 = "X, X, LC1_C13, LC7_C13";
	LC7_A13 : LORAX2 = "X, X, LC5_A13, LC2_A13";
	LC1_C14 : LORAX2 = "X, X, X, LC1_C14";
	LC1_A14 : LORAX2 = "X, LC3_A14, LC1_A14, LC8_A14";
	LC8_A14 : LORAX2 = "X, X, LC3_A14, LC8_A14";
	LC7_B15 : LORAX2 = "LC2_B15, LC4_B15, LC7_B15, LC5_B15";
	LC5_B15 : LORAX2 = "LC2_B15, LC5_B15, LC1_B15, LC3_B15";
	LC1_B15 : LORAX2 = "X, LC2_B15, LC1_B15, LC3_B15";
	LC3_B15 : LORAX2 = "X, X, LC2_B15, LC3_B15";
	LC8_A19 : LORAX2 = "LC6_A19, LC8_A19, LC1_A19, LC7_A19";
	LC1_A19 : LORAX2 = "X, LC6_A19, LC1_A19, LC7_A19";
	LC7_A19 : LORAX2 = "X, X, LC6_A19, LC7_A19";
	LC5_C13 : LORAX2 = "LC5_A19, LC2_C13, LC5_C13, LC4_C13";
	LC4_C13 : LORAX2 = "LC5_A19, LC4_C13, LC1_C13, LC7_C13";
	LC1_C13 : LORAX2 = "X, LC5_A19, LC1_C13, LC7_C13";
	LC7_C13 : LORAX2 = "X, X, LC5_A19, LC7_C13";
	LC7_A5  : LORAX2 = "LC4_A13, LC7_A5, LC3_A5, LC1_A5";
	LC3_A5  : LORAX2 = "X, LC4_A13, LC3_A5, LC1_A5";
	LC1_A5  : LORAX2 = "X, X, LC4_A13, LC1_A5";
	LC8_A13 : LORAX2 = "LC7_A13, LC6_A13, LC8_A13, LC3_A13";
	LC3_A13 : LORAX2 = "LC6_A13, LC3_A13, LC5_A13, LC2_A13";
	LC5_A13 : LORAX2 = "X, LC6_A13, LC5_A13, LC2_A13";
	LC2_A13 : LORAX2 = "X, X, LC6_A13, LC2_A13";
	LC2_A19 : LORAX2 = "X, LC4_A19, LC1_B20, LC3_A14";
	LC6_A13 : LORAX2 = "LC1_A13, LC2_A14, LC3_A19, LC2_A19";
	LC4_A13 : LORAX2 = "X, LC1_A13, LC3_A19, LC2_A19";
	LC5_A19 : LORAX2 = "LC3_A19, LC4_A19, LC1_B20, LC3_A14";
	LC6_A19 : LORAX2 = "X, LC4_A19, LC1_B20, LC3_A14";
	LC2_B15 : LORAX2 = "X, X, LC1_B20, LC3_A14";
END;