📄 baud.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.2 07/10/2002
-- Compiled: 12/04/2005 14:08:13
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "baud"
BEGIN
DEVICE = "EPM9320ARC208-10";
"clk" : INPUT_PIN = 182 ;
"reset" : INPUT_PIN = 153 ;
"rxd" : INPUT_PIN = 183 ;
"rbuf0" : OUTPUT_PIN = 124 ;
"rbuf1" : OUTPUT_PIN = 131 ;
"rbuf2" : OUTPUT_PIN = 130 ;
"rbuf3" : OUTPUT_PIN = 129 ;
"rbuf4" : OUTPUT_PIN = 34 ;
"rbuf5" : OUTPUT_PIN = 126 ;
"rbuf6" : OUTPUT_PIN = 125 ;
"rbuf7" : OUTPUT_PIN = 135 ;
"txd" : OUTPUT_PIN = 29 ;
":4" : LOCATION = LC9_D2 ;
":6" : LOCATION = LC10_B3;
":8" : LOCATION = LC11_B3;
":10" : LOCATION = LC9_B3 ;
":12" : LOCATION = LC9_C1 ;
":14" : LOCATION = LC10_C1;
":16" : LOCATION = LC11_C1;
":18" : LOCATION = LC13_B3;
":20" : LOCATION = LC8_C1 ;
":22" : LOCATION = LC9_A4 ; -- clk_div4
":23" : LOCATION = LC8_A4 ; -- clk_div3
":24" : LOCATION = LC7_A4 ; -- clk_div2
":25" : LOCATION = LC6_A4 ; -- clk_div1
":26" : LOCATION = LC5_A4 ; -- clk_div0
":27" : LOCATION = LC1_A4 ; -- bclk
":28" : LOCATION = LC14_D2; -- rxd_sync
":29" : LOCATION = LC13_D2; -- rxd_shift7
":30" : LOCATION = LC8_D2 ; -- rxd_shift6
":31" : LOCATION = LC3_B3 ; -- rxd_shift5
":32" : LOCATION = LC2_B3 ; -- rxd_shift4
":33" : LOCATION = LC13_C1; -- rxd_shift3
":34" : LOCATION = LC12_C1; -- rxd_shift2
":35" : LOCATION = LC3_C1 ; -- rxd_shift1
":36" : LOCATION = LC12_B3; -- rxd_shift0
":37" : LOCATION = LC7_D2 ; -- rxcnt163
":38" : LOCATION = LC6_D2 ; -- rxcnt162
":39" : LOCATION = LC5_D2 ; -- rxcnt161
":40" : LOCATION = LC4_D2 ; -- rxcnt160
":41" : LOCATION = LC3_D2 ; -- rxd_cnt3
":42" : LOCATION = LC2_D2 ; -- rxd_cnt2
":43" : LOCATION = LC1_D2 ; -- rxd_cnt1
":44" : LOCATION = LC1_B3 ; -- rxd_cnt0
":46" : LOCATION = LC10_A4; -- txd_shift6
":47" : LOCATION = LC11_A4; -- txd_shift5
":48" : LOCATION = LC12_A4; -- txd_shift4
":49" : LOCATION = LC13_A4; -- txd_shift3
":50" : LOCATION = LC14_A4; -- txd_shift2
":51" : LOCATION = LC15_A4; -- txd_shift1
":52" : LOCATION = LC4_A4 ; -- txd_shift0
":53" : LOCATION = LC4_C1 ; -- txcnt163
":54" : LOCATION = LC7_C1 ; -- txcnt162
":55" : LOCATION = LC6_C1 ; -- txcnt161
":56" : LOCATION = LC5_C1 ; -- txcnt160
":57" : LOCATION = LC2_A4 ; -- txd_cnt3
":58" : LOCATION = LC2_C1 ; -- txd_cnt2
":59" : LOCATION = LC3_A4 ; -- txd_cnt1
":60" : LOCATION = LC1_C1 ; -- txd_cnt0
":222" : LOCATION = LC11_D2; -- samples0
"~956~1" : LOCATION = LC10_D2;
"~965~1" : LOCATION = LC12_D2;
"~974~1" : LOCATION = LC4_B3 ;
"~983~1" : LOCATION = LC5_B3 ;
"~992~1" : LOCATION = LC14_C1;
"~1001~1" : LOCATION = LC15_C1;
"~1019~1" : LOCATION = LC6_B3 ;
"~1127~1" : LOCATION = LC7_B3 ;
"~1127~2" : LOCATION = LC8_B3 ;
"~1854~1" : LOCATION = LC1_A5 ;
":1891" : LOCATION = LC1_B5 ;
END;
INTERNAL_INFO "baud"
BEGIN
DEVICE = EPM9320ARC208-10;
OD1P182 : LORAX = "1:->LC5_A4,->LC6_A4,->LC7_A4,->LC8_A4,->LC9_A4,->LC1_A4|";
OD0P153 : LORAX = " 1/ 2. 1:->LC9_D2,->LC10_B3,->LC11_B3,->LC9_B3,->LC9_C1,->LC10_C1,->LC11_C1,->LC13_B3,->LC8_C1,->LC9_A4,->LC8_A4,->LC7_A4,->LC6_A4,->LC5_A4,->LC1_A4,->LC14_D2,->LC13_D2,->LC8_D2,->LC3_B3,->LC2_B3,->LC13_C1,->LC12_C1,->LC3_C1,->LC12_B3,->LC7_D2,->LC6_D2,->LC5_D2,->LC4_D2,->LC3_D2,->LC2_D2,->LC1_D2,->LC1_B3,->LC10_A4,->LC11_A4,->LC12_A4,->LC13_A4,->LC14_A4,->LC15_A4,->LC4_A4,->LC4_C1,->LC7_C1,->LC6_C1,->LC5_C1,->LC2_A4,->LC2_C1,->LC3_A4,->LC1_C1,->LC11_D2,->LC1_B5|2:G58R0,PA31R0C3->LC9_A4,->LC8_A4,->LC7_A4,->LC6_A4,->LC5_A4,->LC1_A4,->LC10_A4,->LC11_A4,->LC12_A4,->LC13_A4,->LC14_A4,->LC15_A4,->LC4_A4,->LC2_A4,->LC3_A4|,2:G58R1|3:PA31R1C4->LC1_B5|,3:PA31R1C2->LC10_B3,->LC11_B3,->LC9_B3,->LC13_B3,->LC3_B3,->LC2_B3,->LC12_B3,->LC1_B3||,2:G58R2,PA31R2C0->LC9_C1,->LC10_C1,->LC11_C1,->LC8_C1,->LC13_C1,->LC12_C1,->LC3_C1,->LC4_C1,->LC7_C1,->LC6_C1,->LC5_C1,->LC2_C1,->LC1_C1|,2:G58R3,PA31R3C1->LC9_D2,->LC14_D2,->LC13_D2,->LC8_D2,->LC7_D2,->LC6_D2,->LC5_D2,->LC4_D2,->LC3_D2,->LC2_D2,->LC1_D2,-";
OD0P153 : LORAX = " 2/ 2. >LC11_D2||";
OD2P183 : LORAX = "1:G70R3,PA21R3C1->LC14_D2,->LC11_D2|";
LC9_D2 : LORAX = "1:G51R3->OH8R3P135|";
LC10_B3 : LORAX = "1:G55R1->OH10R1P125|";
LC11_B3 : LORAX = "1:G62R1->OH12R1P126|";
LC9_B3 : LORAX = "1:G50R1->OH9R1P34|";
LC9_C1 : LORAX = "1:G49R2->OH8R2P129|";
LC10_C1 : LORAX = "1:G57R2->OH10R2P130|";
LC11_C1 : LORAX = "1:G61R2->OH12R2P131|";
LC13_B3 : LORAX = "1:G73R1->OH8R1P124|";
LC8_C1 : LORAX = "1:G42R2->OH7R2P29|";
LC1_A4 : LORAX = "1:V0C3|2:G1R1,PA12R1C2->LC10_B3,->LC11_B3,->LC9_B3,->LC13_B3,->LC3_B3,->LC2_B3,->LC12_B3,->LC1_B3|,2:G1R2,PA12R2C0->LC9_C1,->LC10_C1,->LC11_C1,->LC8_C1,->LC13_C1,->LC12_C1,->LC3_C1,->LC4_C1,->LC7_C1,->LC6_C1,->LC5_C1,->LC2_C1,->LC1_C1|,2:G1R3,PA12R3C1->LC9_D2,->LC14_D2,->LC13_D2,->LC8_D2,->LC7_D2,->LC6_D2,->LC5_D2,->LC4_D2,->LC3_D2,->LC2_D2,->LC1_D2,->LC11_D2||";
LC8_D2 : LORAX = "1:V21C1,G45R1,PA26R1C2->LC10_B3,->LC4_B3|";
LC2_B3 : LORAX = "1:V3C2,G8R2,PA24R2C0->LC14_C1|";
LC3_C1 : LORAX = "1:V6C0,G14R1,PA30R1C2->LC6_B3|";
LC7_D2 : LORAX = "1:V18C1|2:G39R1,PA15R1C2->LC10_B3,->LC11_B3,->LC9_B3,->LC13_B3,->LC3_B3,->LC2_B3,->LC12_B3,->LC7_B3,->LC8_B3|,2:G39R2,PA15R2C0->LC9_C1,->LC10_C1,->LC11_C1,->LC13_C1,->LC12_C1,->LC3_C1||";
LC6_D2 : LORAX = "1:V15C1|2:G33R1,PA8R1C2->LC10_B3,->LC11_B3,->LC9_B3,->LC13_B3,->LC3_B3,->LC2_B3,->LC12_B3,->LC7_B3,->LC8_B3|,2:G33R2,PA8R2C0->LC9_C1,->LC10_C1,->LC11_C1,->LC13_C1,->LC12_C1,->LC3_C1||";
LC5_D2 : LORAX = "1:V12C1|2:G27R1,PA28R1C2->LC10_B3,->LC11_B3,->LC9_B3,->LC13_B3,->LC3_B3,->LC2_B3,->LC12_B3,->LC7_B3,->LC8_B3|,2:G27R2,PA28R2C0->LC9_C1,->LC10_C1,->LC11_C1,->LC13_C1,->LC12_C1,->LC3_C1||";
LC4_D2 : LORAX = "1:V9C1|2:G17R1,PA7R1C2->LC10_B3,->LC11_B3,->LC9_B3,->LC13_B3,->LC3_B3,->LC2_B3,->LC12_B3,->LC7_B3,->LC8_B3|,2:G17R2,PA7R2C0->LC9_C1,->LC10_C1,->LC11_C1,->LC13_C1,->LC12_C1,->LC3_C1||";
LC3_D2 : LORAX = "1:V6C1|2:G16R1,PA0R1C2->LC10_B3,->LC11_B3,->LC9_B3,->LC13_B3,->LC3_B3,->LC2_B3,->LC12_B3,->LC7_B3,->LC8_B3|,2:G16R2,PA0R2C0->LC9_C1,->LC10_C1,->LC11_C1,->LC13_C1,->LC12_C1,->LC3_C1||";
LC2_D2 : LORAX = "1:V3C1|2:G7R1,PA23R1C2->LC10_B3,->LC11_B3,->LC9_B3,->LC13_B3,->LC3_B3,->LC2_B3,->LC12_B3,->LC7_B3,->LC8_B3|,2:G7R2,PA23R2C0->LC9_C1,->LC10_C1,->LC11_C1,->LC13_C1,->LC12_C1,->LC3_C1||";
LC1_D2 : LORAX = "1:V0C1|2:G3R1,PA17R1C2->LC10_B3,->LC11_B3,->LC9_B3,->LC13_B3,->LC3_B3,->LC2_B3,->LC12_B3,->LC7_B3,->LC8_B3|,2:G3R2,PA17R2C0->LC9_C1,->LC10_C1,->LC11_C1,->LC13_C1,->LC12_C1,->LC3_C1||";
LC1_B3 : LORAX = "1:V0C2|2:G4R2,PA18R2C0->LC9_C1,->LC10_C1,->LC11_C1,->LC13_C1,->LC12_C1,->LC3_C1|,2:G4R3,PA18R3C1->LC9_D2,->LC13_D2,->LC8_D2,->LC7_D2,->LC6_D2,->LC5_D2,->LC4_D2,->LC3_D2,->LC2_D2,->LC1_D2||";
LC4_A4 : LORAX = "1:G18R0,PA9R0C4->LC1_A5|";
LC4_C1 : LORAX = "1:V9C0,G19R0,PA17R0C3->LC10_A4,->LC11_A4,->LC12_A4,->LC13_A4,->LC14_A4,->LC15_A4,->LC4_A4,->LC2_A4,->LC3_A4|";
LC7_C1 : LORAX = "1:V18C0,G40R0,PA24R0C3->LC10_A4,->LC11_A4,->LC12_A4,->LC13_A4,->LC14_A4,->LC15_A4,->LC4_A4,->LC2_A4,->LC3_A4|";
LC6_C1 : LORAX = "1:V15C0,G29R0,PA30R0C3->LC10_A4,->LC11_A4,->LC12_A4,->LC13_A4,->LC14_A4,->LC15_A4,->LC4_A4,->LC2_A4,->LC3_A4|";
LC5_C1 : LORAX = "1:V12C0,G28R0,PA29R0C3->LC10_A4,->LC11_A4,->LC12_A4,->LC13_A4,->LC14_A4,->LC15_A4,->LC4_A4,->LC2_A4,->LC3_A4|";
LC2_A4 : LORAX = "1:|2:G6R0,PA22R0C4->LC1_A5|,2:V3C3,G6R2,PA22R2C0->LC1_C1||";
LC2_C1 : LORAX = "1:V3C0,G5R0|2:PA19R0C4->LC1_A5|,2:PA19R0C3->LC10_A4,->LC11_A4,->LC12_A4,->LC13_A4,->LC14_A4,->LC15_A4,->LC4_A4,->LC2_A4,->LC3_A4||";
LC3_A4 : LORAX = "1:|2:G15R0,PA32R0C4->LC1_A5|,2:V6C3,G15R2,PA32R2C0->LC2_C1,->LC1_C1||";
LC1_C1 : LORAX = "1:V0C0,G0R0|2:PA1R0C4->LC1_A5|,2:PA1R0C3->LC10_A4,->LC11_A4,->LC12_A4,->LC13_A4,->LC14_A4,->LC15_A4,->LC4_A4,->LC2_A4,->LC3_A4||";
LC1_A5 : LORAX = "1:V0C4,G2R2,PA13R2C0->LC8_C1|";
LC1_B5 : LORAX = "1:V1C4,G2R0,PA13R0C3->LC10_A4|";
END;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -