波形发生器（含test beach）.txt

内有波形发生器

-----------------------------------------------------------------------------
--
--      The following information has been generated by Exemplar Logic
--      and may be freely distributed and modified.
--
--      Design name : smart_waveform
--
--      Purpose : This design is a smart waveform generator.  
--
----------------------------------------------------------------------------
Library IEEE ;
use IEEE.std_logic_1164.all ;
use IEEE.std_logic_arith.all ;

package waveform_pkg is
  constant rom_width : integer := 6 ;
  subtype  rom_word  is std_logic_vector ( 1 to rom_width) ;
  subtype  rom_range is integer range 0 to 12 ;
  type     rom_table is array ( 0 to 12) of rom_word ;
  constant rom_data : rom_table := rom_table'(
                        "111010" ,
                        "101000" ,
                        "011000" ,
                        "001000" ,
                        "011010" ,
                        "010011" ,
                        "101110" ,
                        "110100" ,
                        "001010" ,
                        "001000" ,
                        "010110" ,
                        "010101" ,
                        "001111" ) ;
  subtype  data_word is integer range 0 to 100 ;
  subtype  data_range is integer range 0 to 12 ;
  type     data_table is array (0 to 12) of data_word ;
  constant data : data_table := data_table'(1,40,9,2,2,4,1,15,5,1,1,3,1) ;
end waveform_pkg ;

LIBRARY IEEE ;
USE IEEE.std_logic_1164.ALL ;
USE IEEE.std_logic_arith.ALL ;
USE work.waveform_pkg.all ;
 
entity smart_waveform is
      port (
            clock : in  std_logic ;
            reset : in  boolean ;
            waves : out rom_word
           ) ;
end ;

architecture rtl of smart_waveform is 
    signal step,next_step : rom_range ;
    signal delay          : data_word  ;
  begin

  next_step <= rom_range'high when step = rom_range'high else step + 1 ;

   time_step : process
     begin
       wait until clock'event and clock = '1' and clock'last_value = '0';
       if (reset) then
         step <= 0 ;
       elsif (delay = 1) then 
         step <= next_step ;
       else
         null ;
       end if ;
   end process ;

   delay_step : process
     begin
       wait until clock'event and clock = '1' ;
       if (reset) then
         delay <= data(0) ;
       elsif (delay = 1) then 
         delay <= data(next_step) ;
       else
         delay <= delay - 1 ;
       end if ;
    end process ;

   waves <= rom_data(step) ;

end ;