multiplier.fit

在MAXPLUSII下实现BOOTH算法

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 01/02/2005 09:46:18      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "multiplier"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk"                          : INPUT_PIN  = 1      ;
    "multiplier0"                  : INPUT_PIN  = 43     ;
    "multiplier1"                  : INPUT_PIN  = 49     ;
    "multiplier2"                  : INPUT_PIN  = 78     ;
    "multiplier3"                  : INPUT_PIN  = 51     ;
    "multiplier4"                  : INPUT_PIN  = 17     ;
    "multiplier5"                  : INPUT_PIN  = 73     ;
    "multiplier6"                  : INPUT_PIN  = 16     ;
    "multiplier7"                  : INPUT_PIN  = 79     ;
    "M0"                           : INPUT_PIN  = 42     ;
    "M1"                           : INPUT_PIN  = 36     ;
    "M2"                           : INPUT_PIN  = 44     ;
    "M3"                           : INPUT_PIN  = 8      ;
    "M4"                           : INPUT_PIN  = 84     ;
    "M5"                           : INPUT_PIN  = 6      ;
    "M6"                           : INPUT_PIN  = 5      ;
    "M7"                           : INPUT_PIN  = 19     ;
    "reset"                        : INPUT_PIN  = 2      ;
    "done"                         : OUTPUT_PIN = 53     ;
    "result0"                      : OUTPUT_PIN = 39     ;
    "result1"                      : OUTPUT_PIN = 3      ;
    "result2"                      : OUTPUT_PIN = 47     ;
    "result3"                      : OUTPUT_PIN = 22     ;
    "result4"                      : OUTPUT_PIN = 70     ;
    "result5"                      : OUTPUT_PIN = 72     ;
    "result6"                      : OUTPUT_PIN = 69     ;
    "result7"                      : OUTPUT_PIN = 50     ;
    "result8"                      : OUTPUT_PIN = 52     ;
    "result9"                      : OUTPUT_PIN = 60     ;
    "result10"                     : OUTPUT_PIN = 9      ;
    "result11"                     : OUTPUT_PIN = 10     ;
    "result12"                     : OUTPUT_PIN = 66     ;
    "result13"                     : OUTPUT_PIN = 71     ;
    "result14"                     : OUTPUT_PIN = 18     ;
    "result15"                     : OUTPUT_PIN = 24     ;
    "|LPM_ADD_SUB:379|addcore:adder|pcarry0" : LOCATION   = LC4_A4 ;
    "|LPM_ADD_SUB:379|addcore:adder|pcarry1" : LOCATION   = LC7_A4 ;
    "|LPM_ADD_SUB:379|addcore:adder|pcarry2" : LOCATION   = LC5_A2 ;
    "|LPM_ADD_SUB:379|addcore:adder|pcarry3" : LOCATION   = LC6_A2 ;
    "|LPM_ADD_SUB:379|addcore:adder|pcarry4" : LOCATION   = LC5_A5 ;
    "|LPM_ADD_SUB:379|addcore:adder|pcarry5" : LOCATION   = LC2_A5 ;
    "|LPM_ADD_SUB:379|addcore:adder|pcarry6" : LOCATION   = LC5_A11;
    "|LPM_ADD_SUB:379|addcore:adder|:157" : LOCATION   = LC4_A1 ;
    "|LPM_ADD_SUB:379|addcore:adder|:158" : LOCATION   = LC8_A2 ;
    "|LPM_ADD_SUB:379|addcore:adder|:159" : LOCATION   = LC1_A10;
    "|LPM_ADD_SUB:379|addcore:adder|:160" : LOCATION   = LC7_A5 ;
    "|LPM_ADD_SUB:379|addcore:adder|:161" : LOCATION   = LC8_A11;
    "|LPM_ADD_SUB:379|addcore:adder|:162" : LOCATION   = LC6_A11;
    "|LPM_ADD_SUB:436|addcore:adder|pcarry1" : LOCATION   = LC8_A4 ;
    "|LPM_ADD_SUB:436|addcore:adder|pcarry2" : LOCATION   = LC1_A2 ;
    "|LPM_ADD_SUB:436|addcore:adder|pcarry3" : LOCATION   = LC4_A2 ;
    "|LPM_ADD_SUB:436|addcore:adder|pcarry4" : LOCATION   = LC1_A5 ;
    "|LPM_ADD_SUB:436|addcore:adder|pcarry5" : LOCATION   = LC8_A5 ;
    "|LPM_ADD_SUB:436|addcore:adder|pcarry6" : LOCATION   = LC3_A11;
    "|LPM_ADD_SUB:436|addcore:adder|~156~1" : LOCATION   = LC1_A4 ;
    "|LPM_ADD_SUB:722|addcore:adder|pcarry1" : LOCATION   = LC2_A6 ;
    "|LPM_ADD_SUB:722|addcore:adder|pcarry2" : LOCATION   = LC4_A6 ;
    ":19"                          : LOCATION   = LC5_A12;
    ":21"                          : LOCATION   = LC8_A12;
    ":23"                          : LOCATION   = LC3_A12;
    ":25"                          : LOCATION   = LC2_A12;
    ":27"                          : LOCATION   = LC6_A1 ;
    ":29"                          : LOCATION   = LC3_A1 ;
    ":31"                          : LOCATION   = LC4_A20;
    ":33"                          : LOCATION   = LC8_A20;
    ":35"                          : LOCATION   = LC6_A18;
    ":37"                          : LOCATION   = LC8_A18;
    ":39"                          : LOCATION   = LC2_A20;
    ":41"                          : LOCATION   = LC5_A20;
    ":43"                          : LOCATION   = LC2_A14;
    ":45"                          : LOCATION   = LC3_A14;
    ":47"                          : LOCATION   = LC7_A12;
    ":49"                          : LOCATION   = LC6_A12;
    ":51"                          : LOCATION   = LC6_A20;
    ":53"                          : LOCATION   = LC2_A11;  -- A7
    ":54"                          : LOCATION   = LC3_A10;  -- A6
    ":55"                          : LOCATION   = LC5_A10;  -- A5
    ":56"                          : LOCATION   = LC4_A10;  -- A4
    ":57"                          : LOCATION   = LC2_A1 ;  -- A3
    ":58"                          : LOCATION   = LC1_A1 ;  -- A2
    ":59"                          : LOCATION   = LC2_A4 ;  -- A1
    ":60"                          : LOCATION   = LC1_A9 ;  -- A0
    ":61"                          : LOCATION   = LC2_A9 ;  -- qq
    ":62"                          : LOCATION   = LC7_A18;  -- Q7
    ":63"                          : LOCATION   = LC4_A18;  -- Q6
    ":64"                          : LOCATION   = LC2_A18;  -- Q5
    ":65"                          : LOCATION   = LC1_A20;  -- Q4
    ":66"                          : LOCATION   = LC8_A14;  -- Q3
    ":67"                          : LOCATION   = LC6_A14;  -- Q2
    ":68"                          : LOCATION   = LC1_A14;  -- Q1
    ":69"                          : LOCATION   = LC6_A9 ;  -- Q0
    ":70"                          : LOCATION   = LC1_A12;  -- count3
    ":71"                          : LOCATION   = LC6_A6 ;  -- count2
    ":72"                          : LOCATION   = LC3_A6 ;  -- count1
    ":73"                          : LOCATION   = LC5_A6 ;  -- count0
    ":74"                          : LOCATION   = LC1_A6 ;  -- step
    ":276"                         : LOCATION   = LC4_A12;
    ":326"                         : LOCATION   = LC7_A9 ;
    ":338"                         : LOCATION   = LC5_A9 ;
    ":462"                         : LOCATION   = LC4_A11;
    ":468"                         : LOCATION   = LC7_A11;
    ":474"                         : LOCATION   = LC1_A11;
    ":483"                         : LOCATION   = LC4_A5 ;
    ":486"                         : LOCATION   = LC3_A5 ;
    ":492"                         : LOCATION   = LC6_A5 ;
    ":495"                         : LOCATION   = LC2_A10;
    ":501"                         : LOCATION   = LC2_A2 ;
    ":504"                         : LOCATION   = LC3_A2 ;
    ":510"                         : LOCATION   = LC7_A2 ;
    ":513"                         : LOCATION   = LC5_A1 ;
    ":523"                         : LOCATION   = LC5_A4 ;
    ":524"                         : LOCATION   = LC3_A4 ;
    ":778"                         : LOCATION   = LC5_A18;
    ":787"                         : LOCATION   = LC3_A18;
    ":796"                         : LOCATION   = LC1_A18;
    ":805"                         : LOCATION   = LC3_A20;
    ":814"                         : LOCATION   = LC7_A14;
    ":823"                         : LOCATION   = LC5_A14;
    ":832"                         : LOCATION   = LC4_A14;
    ":841"                         : LOCATION   = LC3_A9 ;
    ":888"                         : LOCATION   = LC7_A6 ;
    ":896"                         : LOCATION   = LC8_A10;
    ":904"                         : LOCATION   = LC7_A10;
    ":913"                         : LOCATION   = LC6_A10;
    ":922"                         : LOCATION   = LC8_A1 ;
    ":931"                         : LOCATION   = LC7_A1 ;
    ":940"                         : LOCATION   = LC6_A4 ;
    "~1312~1"                      : LOCATION   = LC4_A9 ;
    "~1312~2"                      : LOCATION   = LC8_A9 ;

END;

INTERNAL_INFO "multiplier"
BEGIN
	DEVICE = EPF10K10LC84-3;