⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 dhry.c

📁 KEIL C51 V7.02.rar
💻 C
📖 第 1 页 / 共 2 页
字号:
/*	EVERBODY:	Please read "APOLOGY" below. -rick 01/06/86
 *			See introduction in net.arch, or net.micro
 *
 *	"DHRYSTONE" Benchmark Program
 *
 *	Version:	C/1.1, 12/01/84
 *
 *	Date:		PROGRAM updated 01/06/86, RESULTS updated 03/31/86
 *
 *	Author:		Reinhold P. Weicker,  CACM Vol 27, No 10, 10/84 pg. 1013
 *			Translated from ADA by Rick Richardson
 *			Every method to preserve ADA-likeness has been used,
 *			at the expense of C-ness.
 *
 *	Compile:	cc -O dry.c -o drynr			: No registers
 *			cc -O -DREG=register dry.c -o dryr	: Registers
 *
 *	Defines:	Defines are provided for old C compiler's
 *			which don't have enums, and can't assign structures.
 *			The time(2) function is library dependant; Most
 *			return the time in seconds, but beware of some, like
 *			Aztec C, which return other units.
 *			The LOOPS define is initially set for 50000 loops.
 *			If you have a machine with large integers and is
 *			very fast, please change this number to 500000 to
 *			get better accuracy.  Please select the way to
 *			measure the execution time using the TIME define.
 *			For single user machines, time(2) is adequate. For
 *			multi-user machines where you cannot get single-user
 *			access, use the times(2) function.  If you have
 *			neither, use a stopwatch in the dead of night.
 *			Use a "printf" at the point marked "start timer"
 *			to begin your timings. DO NOT use the UNIX "time(1)"
 *			command, as this will measure the total time to
 *			run this program, which will (erroneously) include
 *			the time to malloc(3) storage and to compute the
 *			time it takes to do nothing.
 *
 *	Run:		drynr; dryr
 *
 *	Results:	If you get any new machine/OS results, please send to:
 *
 *				ihnp4!castor!pcrat!rick
 *
 *			and thanks to all that do.  Space prevents listing
 *			the names of those who have provided some of these
 *			results.  I'll be forwarding these results to
 *			Rheinhold Weicker.
 *
 *	Note:		I order the list in increasing performance of the
 *			"with registers" benchmark.  If the compiler doesn't
 *			provide register variables, then the benchmark
 *			is the same for both REG and NOREG.
 *
 *	PLEASE:		Send complete information about the machine type,
 *			clock speed, OS and C manufacturer/version.  If
 *			the machine is modified, tell me what was done.
 *			On UNIX, execute uname -a and cc -V to get this info.
 *
 *	80x8x NOTE:	80x8x benchers: please try to do all memory models
 *			for a particular compiler.
 *
 *	APOLOGY (1/30/86):
 *		Well, I goofed things up!  As pointed out by Haakon Bugge,
 *		the line of code marked "GOOF" below was missing from the
 *		Dhrystone distribution for the last several months.  It
 *		*WAS* in a backup copy I made last winter, so no doubt it
 *		was victimized by sleepy fingers operating vi!
 *
 *		The effect of the line missing is that the reported benchmarks
 *		are 15% too fast (at least on a 80286).  Now, this creates
 *		a dilema - do I throw out ALL the data so far collected
 *		and use only results from this (corrected) version, or
 *		do I just keep collecting data for the old version?
 *
 *		Since the data collected so far *is* valid as long as it
 *		is compared with like data, I have decided to keep
 *		TWO lists- one for the old benchmark, and one for the
 *		new.  This also gives me an opportunity to correct one
 *		other error I made in the instructions for this benchmark.
 *		My experience with C compilers has been mostly with
 *		UNIX 'pcc' derived compilers, where the 'optimizer' simply
 *		fixes sloppy code generation (peephole optimization).
 *		But today, there exist C compiler optimizers that will actually
 *		perform optimization in the Computer Science sense of the word,
 *		by removing, for example, assignments to a variable whose
 *		value is never used.  Dhrystone, unfortunately, provides
 *		lots of opportunities for this sort of optimization.
 *
 *		I request that benchmarkers re-run this new, corrected
 *		version of Dhrystone, turning off or bypassing optimizers
 *		which perform more than peephole optimization.  Please
 *		indicate the version of Dhrystone used when reporting the
 *		results to me.
 *		
 * RESULTS BEGIN HERE
 *
 *----------------DHRYSTONE VERSION 1.1 RESULTS BEGIN--------------------------
 *
 * MACHINE	MICROPROCESSOR	OPERATING	COMPILER	DHRYSTONES/SEC.
 * TYPE				SYSTEM				NO REG	REGS
 * --------------------------	------------	-----------	---------------
 * Apple IIe	65C02-1.02Mhz	DOS 3.3		Aztec CII v1.05i  37	  37
 * -		Z80-2.5Mhz	CPM-80 v2.2	Aztec CII v1.05g  91	  91
 * -		8086-8Mhz	RMX86 V6	Intel C-86 V2.0	 197	 203LM??
 * IBM PC/XT	8088-4.77Mhz	COHERENT 2.3.43	Mark Williams	 259	 275
 * -		8086-8Mhz	RMX86 V6	Intel C-86 V2.0	 287	 304 ??
 * Fortune 32:16 68000-6Mhz	V7+sys3+4.1BSD  cc		 360	 346
 * PDP-11/34A	w/FP-11C	UNIX V7m	cc		 406	 449
 * Macintosh512	68000-7.7Mhz	Mac ROM O/S	DeSmet(C ware)	 625	 625
 * VAX-11/750	w/FPA		UNIX 4.2BSD	cc		 831	 852
 * DataMedia 932 68000-10Mhz	UNIX sysV	cc		 837	 888
 * Plexus P35	68000-12.5Mhz	UNIX sysIII	cc		 835	 894
 * ATT PC7300	68010-10Mhz	UNIX 5.0.3	cc		 973	1034
 * Compaq II	80286-8Mhz	MSDOS 3.1	MS C 3.0 	1086	1140 LM
 * IBM PC/AT    80286-7.5Mhz    Venix/286 SVR2  cc              1159    1254 *15
 * Compaq II	80286-8Mhz	MSDOS 3.1	MS C 3.0 	1190	1282 MM
 * MicroVAX II	-		Mach/4.3	cc		1361	1385
 * DEC uVAX II	-		Ultrix-32m v1.1	cc		1385	1399
 * Compaq II	80286-8Mhz	MSDOS 3.1	MS C 3.0 	1351	1428
 * VAX 11/780	-		UNIX 4.2BSD	cc		1417	1441
 * VAX-780/MA780		Mach/4.3	cc		1428	1470
 * VAX 11/780	-		UNIX 5.0.1	cc 4.1.1.31	1650	1640
 * Ridge 32C V1	-		ROS 3.3		Ridge C (older)	1628	1695
 * Gould PN6005	-		UTX 1.1c+ (4.2)	cc		1732	1884
 * Gould PN9080	custom ECL	UTX-32 1.1C	cc		4745	4992
 * VAX-784	-		Mach/4.3	cc		5263	5555 &4
 * VAX 8600	-		4.3 BSD		cc		6329	6423
 * Amdahl 5860	-		UTS sysV	cc 1.22	       28735   28846
 * IBM3090/200	-		?		?	       31250   31250
 *
 *
 *----------------DHRYSTONE VERSION 1.0 RESULTS BEGIN--------------------------
 *
 * MACHINE	MICROPROCESSOR	OPERATING	COMPILER	DHRYSTONES/SEC.
 * TYPE				SYSTEM				NO REG	REGS
 * --------------------------	------------	-----------	---------------
 * Commodore 64	6510-1MHz	C64 ROM		C Power 2.8	  36	  36
 * HP-110	8086-5.33Mhz	MSDOS 2.11	Lattice 2.14	 284	 284
 * IBM PC/XT	8088-4.77Mhz	PC/IX		cc		 271	 294
 * CCC 3205	-		Xelos(SVR2) 	cc		 558	 592
 * Perq-II	2901 bitslice	Accent S5c 	cc (CMU)	 301	 301
 * IBM PC/XT	8088-4.77Mhz	COHERENT 2.3.43	MarkWilliams cc  296	 317
 * Cosmos	68000-8Mhz	UniSoft		cc		 305	 322
 * IBM PC/XT	8088-4.77Mhz	Venix/86 2.0	cc		 297	 324
 * DEC PRO 350  11/23           Venix/PRO SVR2  cc               299     325
 * IBM PC	8088-4.77Mhz	MSDOS 2.0	b16cc 2.0	 310	 340
 * PDP11/23	11/23           Venix (V7)      cc               320     358
 * Commodore Amiga		?		Lattice 3.02	 368	 371
 * PC/XT        8088-4.77Mhz    Venix/86 SYS V  cc               339     377
 * IBM PC	8088-4.77Mhz	MSDOS 2.0	CI-C86 2.20M	 390	 390
 * IBM PC/XT	8088-4.77Mhz	PCDOS 2.1	Wizard 2.1	 367	 403
 * IBM PC/XT	8088-4.77Mhz	PCDOS 3.1	Lattice 2.15	 403	 403 @
 * Colex DM-6	68010-8Mhz	Unisoft SYSV	cc		 378	 410
 * IBM PC	8088-4.77Mhz	PCDOS 3.1	Datalight 1.10	 416	 416
 * IBM PC	NEC V20-4.77Mhz	MSDOS 3.1	MS 3.1 		 387	 420
 * IBM PC/XT	8088-4.77Mhz	PCDOS 2.1	Microsoft 3.0	 390	 427
 * IBM PC	NEC V20-4.77Mhz	MSDOS 3.1	MS 3.1 (186) 	 393	 427
 * PDP-11/34	-		UNIX V7M	cc		 387	 438
 * IBM PC	8088, 4.77mhz	PC-DOS 2.1	Aztec C v3.2d	 423	 454
 * Tandy 1000	V20, 4.77mhz	MS-DOS 2.11	Aztec C v3.2d	 423	 458
 * Tandy TRS-16B 68000-6Mhz	Xenix 1.3.5	cc		 438	 458
 * PDP-11/34	-		RSTS/E		decus c		 438	 495
 * Onyx C8002	Z8000-4Mhz	IS/1 1.1 (V7)	cc		 476	 511
 * Tandy TRS-16B 68000-6Mhz	Xenix 1.3.5	Green Hills	 609	 617
 * DEC PRO 380  11/73           Venix/PRO SVR2  cc               577     628
 * FHL QT+	68000-10Mhz	Os9/68000	version 1.3	 603	 649 FH
 * Apollo DN550	68010-?Mhz	AegisSR9/IX	cc 3.12		 666	 666
 * HP-110	8086-5.33Mhz	MSDOS 2.11	Aztec-C		 641	 676 
 * ATT PC6300	8086-8Mhz	MSDOS 2.11	b16cc 2.0	 632	 684
 * IBM PC/AT	80286-6Mhz	PCDOS 3.0	CI-C86 2.1	 666	 684
 * Tandy 6000	68000-8Mhz	Xenix 3.0	cc		 694	 694
 * IBM PC/AT	80286-6Mhz	Xenix 3.0	cc		 684	 704 MM
 * Macintosh	68000-7.8Mhz 2M	Mac Rom		Mac C 32 bit int 694	 704
 * Macintosh	68000-7.7Mhz	-		MegaMax C 2.0	 661	 709
 * Macintosh512	68000-7.7Mhz	Mac ROM O/S	DeSmet(C ware)	 714	 714
 * IBM PC/AT	80286-6Mhz	Xenix 3.0	cc		 704	 714 LM
 * Codata 3300	68000-8Mhz	UniPlus+ (v7)	cc		 678	 725
 * WICAT MB	68000-8Mhz	System V	WICAT C 4.1	 585	 731 ~
 * Cadmus 9000	68010-10Mhz	UNIX		cc		 714	 735
 * AT&T 6300    8086-8Mhz       Venix/86 SVR2   cc               668     743
 * Cadmus 9790	68010-10Mhz 1MB	SVR0,Cadmus3.7	cc		 720	 747
 * NEC PC9801F	8086-8Mhz	PCDOS 2.11	Lattice 2.15	 768	  -  @
 * ATT PC6300	8086-8Mhz	MSDOS 2.11	CI-C86 2.20M	 769	 769
 * Burroughs XE550 68010-10Mhz	Centix 2.10	cc		 769	 769 CT1
 * EAGLE/TURBO  8086-8Mhz       Venix/86 SVR2   cc               696     779
 * ALTOS 586	8086-10Mhz	Xenix 3.0b	cc 		 724	 793
 * DEC 11/73	J-11 micro	Ultrix-11 V3.0	cc		 735	 793
 * ATT 3B2/300	WE32000-?Mhz	UNIX 5.0.2	cc		 735	 806
 * Apollo DN320	68010-?Mhz	AegisSR9/IX	cc 3.12		 806	 806
 * IRIS-2400	68010-10Mhz	UNIX System V	cc		 772	 829
 * Atari 520ST  68000-8Mhz      TOS             DigResearch      839     846
 * IBM PC/AT	80286-6Mhz	PCDOS 3.0	MS 3.0(large)	 833	 847 LM
 * WICAT MB	68000-8Mhz	System V	WICAT C 4.1	 675	 853 S~
 * VAX 11/750	-		Ultrix 1.1	4.2BSD cc	 781	 862
 * CCC  7350A	68000-8MHz	UniSoft V.2	cc		 821	 875
 * VAX 11/750	-		UNIX 4.2bsd	cc		 862	 877
 * Fast Mac	68000-7.7Mhz	-		MegaMax C 2.0	 839	 904 +
 * IBM PC/XT	8086-9.54Mhz	PCDOS 3.1	Microsoft 3.0	 833	 909 C1
 * DEC 11/44			Ultrix-11 V3.0	cc		 862	 909
 * Macintosh	68000-7.8Mhz 2M	Mac Rom		Mac C 16 bit int 877	 909 S
 * CCC 3210	-		Xelos R01(SVR2)	cc		 849	 924
 * CCC 3220	-               Ed. 7 v2.3      cc		 892	 925
 * IBM PC/AT	80286-6Mhz	Xenix 3.0	cc -i		 909	 925
 * AT&T 6300	8086, 8mhz	MS-DOS 2.11	Aztec C v3.2d	 862	 943
 * IBM PC/AT	80286-6Mhz	Xenix 3.0	cc		 892	 961
 * VAX 11/750	w/FPA		Eunice 3.2	cc		 914	 976
 * IBM PC/XT	8086-9.54Mhz	PCDOS 3.1	Wizard 2.1	 892	 980 C1
 * IBM PC/XT	8086-9.54Mhz	PCDOS 3.1	Lattice 2.15	 980	 980 C1
 * Plexus P35	68000-10Mhz	UNIX System III cc		 984	 980
 * PDP-11/73	KDJ11-AA 15Mhz	UNIX V7M 2.1	cc		 862     981
 * VAX 11/750	w/FPA		UNIX 4.3bsd	cc		 994	 997
 * IRIS-1400	68010-10Mhz	UNIX System V	cc		 909	1000
 * IBM PC/AT	80286-6Mhz	Venix/86 2.1	cc		 961	1000
 * IBM PC/AT	80286-6Mhz	PCDOS 3.0	b16cc 2.0	 943	1063
 * Zilog S8000/11 Z8001-5.5Mhz	Zeus 3.2	cc		1011	1084
 * NSC ICM-3216 NSC 32016-10Mhz	UNIX SVR2	cc		1041	1084
 * IBM PC/AT	80286-6Mhz	PCDOS 3.0	MS 3.0(small)	1063	1086
 * VAX 11/750	w/FPA		VMS		VAX-11 C 2.0	 958	1091
 * Stride	68000-10Mhz	System-V/68	cc		1041	1111
 * Plexus P/60  MC68000-12.5Mhz	UNIX SYSIII	Plexus		1111	1111
 * ATT PC7300	68010-10Mhz	UNIX 5.0.2	cc		1041	1111
 * CCC 3230	-		Xelos R01(SVR2)	cc		1040	1126
 * Stride	68000-12Mhz	System-V/68	cc		1063	1136
 * IBM PC/AT    80286-6Mhz      Venix/286 SVR2  cc              1056    1149
 * Plexus P/60  MC68000-12.5Mhz	UNIX SYSIII	Plexus		1111	1163 T
 * IBM PC/AT	80286-6Mhz	PCDOS 3.0	Datalight 1.10	1190	1190
 * ATT PC6300+	80286-6Mhz	MSDOS 3.1	b16cc 2.0	1111	1219
 * IBM PC/AT	80286-6Mhz	PCDOS 3.1	Wizard 2.1	1136	1219
 * Sun2/120	68010-10Mhz	Sun 4.2BSD	cc		1136	1219
 * IBM PC/AT	80286-6Mhz	PCDOS 3.0	CI-C86 2.20M	1219	1219
 * WICAT PB	68000-8Mhz	System V	WICAT C 4.1	 998	1226 ~
 * MASSCOMP 500	68010-10MHz	RTU V3.0	cc (V3.2)	1156	1238
 * Alliant FX/8 IP (68012-12Mhz) Concentrix	cc -ip;exec -i 	1170	1243 FX
 * Cyb DataMate	68010-12.5Mhz	Uniplus 5.0	Unisoft cc	1162	1250
 * PDP 11/70	-		UNIX 5.2	cc		1162	1250
 * IBM PC/AT	80286-6Mhz	PCDOS 3.1	Lattice 2.15	1250	1250
 * IBM PC/AT	80286-7.5Mhz	Venix/86 2.1	cc		1190	1315 *15
 * Sun2/120	68010-10Mhz	Standalone	cc		1219	1315
 * Intel 380	80286-8Mhz	Xenix R3.0up1	cc		1250	1315 *16
 * Sequent Balance 8000	NS32032-10MHz	Dynix 2.0	cc	1250	1315 N12
 * IBM PC/DSI-32 32032-10Mhz	MSDOS 3.1	GreenHills 2.14	1282	1315 C3
 * ATT 3B2/400	WE32100-?Mhz	UNIX 5.2	cc		1315	1315
 * CCC 3250XP	-		Xelos R01(SVR2)	cc		1215	1318
 * IBM PC/RT 032 RISC(801?)?Mhz BSD 4.2         cc              1248    1333 RT
 * DG MV4000	-		AOS/VS 5.00	cc		1333	1333
 * IBM PC/AT	80286-8Mhz	Venix/86 2.1	cc		1275	1380 *16
 * IBM PC/AT	80286-6Mhz	MSDOS 3.0	Microsoft 3.0	1250	1388
 * ATT PC6300+	80286-6Mhz	MSDOS 3.1	CI-C86 2.20M	1428	1428
 * COMPAQ/286   80286-8Mhz      Venix/286 SVR2  cc              1326    1443
 * IBM PC/AT    80286-7.5Mhz    Venix/286 SVR2  cc              1333    1449 *15
 * WICAT PB	68000-8Mhz	System V	WICAT C 4.1	1169	1464 S~
 * Tandy II/6000 68000-8Mhz	Xenix 3.0	cc      	1384	1477
 * MicroVAX II	-		Mach/4.3	cc		1513	1536
 * WICAT MB	68000-12.5Mhz	System V	WICAT C 4.1	1246	1537 ~
 * IBM PC/AT    80286-9Mhz      SCO Xenix V     cc              1540    1556 *18
 * Cyb DataMate	68010-12.5Mhz	Uniplus 5.0	Unisoft cc	1470	1562 S
 * VAX 11/780	-		UNIX 5.2	cc		1515	1562
 * MicroVAX-II	-		-		-		1562	1612
 * VAX-780/MA780		Mach/4.3	cc		1587	1612
 * VAX 11/780	-		UNIX 4.3bsd	cc		1646	1662
 * Apollo DN660	-		AegisSR9/IX	cc 3.12		1666	1666
 * ATT 3B20	-		UNIX 5.2	cc		1515	1724
 * NEC PC-98XA	80286-8Mhz	PCDOS 3.1	Lattice 2.15	1724	1724 @
 * HP9000-500	B series CPU	HP-UX 4.02	cc		1724	-
 * Ridge 32C V1	-		ROS 3.3		Ridge C (older)	1776	-
 * IBM PC/STD	80286-8Mhz	MSDOS 3.0 	Microsoft 3.0	1724	1785 C2
 * WICAT MB	68000-12.5Mhz	System V	WICAT C 4.1	1450	1814 S~
 * WICAT PB	68000-12.5Mhz	System V	WICAT C 4.1	1530	1898 ~
 * DEC-2065	KL10-Model B	TOPS-20 6.1FT5	Port. C Comp.	1937	1946
 * Gould PN6005	-		UTX 1.1(4.2BSD)	cc		1675	1964
 * DEC2060	KL-10		TOPS-20		cc		2000	2000 NM
 * Intel 310AP	80286-8Mhz	Xenix 3.0	cc		1893	2009
 * VAX 11/785	-		UNIX 5.2	cc		2083	2083
 * VAX 11/785	-		VMS		VAX-11 C 2.0	2083	2083
 * VAX 11/785	-		UNIX SVR2	cc		2123	2083
 * VAX 11/785   -               ULTRIX-32 1.1   cc		2083    2091 
 * VAX 11/785	-		UNIX 4.3bsd	cc		2135	2136
 * WICAT PB	68000-12.5Mhz	System V	WICAT C 4.1	1780	2233 S~
 * Pyramid 90x	-		OSx 2.3		cc		2272	2272
 * Pyramid 90x	FPA,cache,4Mb	OSx 2.5		cc no -O	2777	2777
 * Pyramid 90x	w/cache		OSx 2.5		cc w/-O		3333	3333
 * IBM-4341-II	-		VM/SP3		Waterloo C 1.2  3333	3333
 * IRIS-2400T	68020-16.67Mhz	UNIX System V	cc		3105	3401
 * Celerity C-1200 ?		UNIX 4.2BSD	cc		3485	3468
 * SUN 3/75	68020-16.67Mhz	SUN 4.2 V3	cc		3333	3571
 * IBM-4341	Model 12	UTS 5.0		?		3685	3685
 * SUN-3/160    68020-16.67Mhz  Sun 4.2 V3.0A   cc		3381    3764
 * Sun 3/180	68020-16.67Mhz	Sun 4.2		cc		3333	3846
 * IBM-4341	Model 12	UTS 5.0		?		3910	3910 MN
 * MC 5400	68020-16.67MHz	RTU V3.0	cc (V4.0)	3952	4054
 * Intel 386/20	80386-12.5Mhz	PMON debugger	Intel C386v0.2	4149	4386
 * NCR Tower32  68020-16.67Mhz  SYS 5.0 Rel 2.0 cc              3846	4545
 * MC 5600/5700	68020-16.67MHz	RTU V3.0	cc (V4.0)	4504	4746 %
 * Intel 386/20	80386-12.5Mhz	PMON debugger	Intel C386v0.2	4534	4794 i1
 * Intel 386/20	80386-16Mhz	PMON debugger	Intel C386v0.2	5304	5607
 * Gould PN9080	custom ECL	UTX-32 1.1C	cc		5369	5676
 * Gould 1460-342 ECL proc      UTX/32 1.1/c    cc              5342    5677 G1
 * VAX-784	-		Mach/4.3	cc		5882	5882 &4
 * Intel 386/20	80386-16Mhz	PMON debugger	Intel C386v0.2	5801	6133 i1
 * VAX 8600	-		UNIX 4.3bsd	cc		7024	7088
 * VAX 8600	-		VMS		VAX-11 C 2.0	7142	7142
 * Alliant FX/8 CE		Concentrix	cc -ce;exec -c 	6952	7655 FX
 * CCI POWER 6/32		COS(SV+4.2)	cc		7500	7800
 * CCI POWER 6/32		POWER 6 UNIX/V	cc		8236	8498
 * CCI POWER 6/32		4.2 Rel. 1.2b	cc		8963	9544
 * Sperry (CCI Power 6)		4.2BSD		cc		9345   10000
 * CRAY-X-MP/12	   105Mhz	COS 1.14	Cray C         10204   10204
 * IBM-3083	-		UTS 5.0 Rel 1	cc	       16666   12500
 * CRAY-1A	    80Mhz	CTSS		Cray C 2.0     12100   13888
 * IBM-3083	-		VM/CMS HPO 3.4	Waterloo C 1.2 13889   13889
 * Amdahl 470 V/8 		UTS/V 5.2       cc v1.23       15560   15560
 * CRAY-X-MP/48	   105Mhz	CTSS		Cray C 2.0     15625   17857
 * Amdahl 580	-		UTS 5.0 Rel 1.2	cc v1.5        23076   23076
 * Amdahl 5860	 		UTS/V 5.2       cc v1.23       28970   28970
 *
 * NOTE
 *   *   Crystal changed from 'stock' to listed value.
 *   +   This Macintosh was upgraded from 128K to 512K in such a way that
 *       the new 384K of memory is not slowed down by video generator accesses.
 *   %   Single processor; MC == MASSCOMP
 *   NM  A version 7 C compiler written at New Mexico Tech.
 *   @   vanilla Lattice compiler used with MicroPro standard library
 *   S   Shorts used instead of ints
 *   T	 with Chris Torek's patches (whatever they are).
 *   ~   For WICAT Systems: MB=MultiBus, PB=Proprietary Bus
 *   LM  Large Memory Model. (Otherwise, all 80x8x results are small model)
 *   MM  Medium Memory Model. (Otherwise, all 80x8x results are small model)
 *   C1  Univation PC TURBO Co-processor; 9.54Mhz 8086, 640K RAM
 *   C2  Seattle Telecom STD-286 board
 *   C3  Definicon DSI-32 coprocessor
 *   C?  Unknown co-processor board?
 *   CT1 Convergent Technologies MegaFrame, 1 processor.
 *   MN  Using Mike Newtons 'optimizer' (see net.sources).
 *   G1  This Gould machine has 2 processors and was able to run 2 dhrystone
 *       Benchmarks in parallel with no slowdown.
 *   FH  FHC == Frank Hogg Labs (Hazelwood Uniquad 2 in an FHL box).
 *   FX  The Alliant FX/8 is a system consisting of 1-8 CEs (computation
 *	 engines) and 1-12 IPs (interactive processors). Note N8 applies.
 *   RT  This is one of the RT's that CMU has been using for awhile.  I'm
 *	 not sure that this is identical to the machine that IBM is selling
 *	 to the public.
 *   i1  Normally, the 386/20 starter kit has a 16k direct mapped cache
 *	 which inserts 2 or 3 wait states on a write thru.  These results
 *	 were obtained by disabling the write-thru, or essentially turning
 *	 the cache into 0 wait state memory.
 *   Nnn This machine has multiple processors, allowing "nn" copies of the
 *	 benchmark to run in the same time as 1 copy.
 *   &nn This machine has "nn" processors, and the benchmark results were
 *	 obtained by having all "nn" processors working on 1 copy of dhrystone.
 *	 (Note, this is different than Nnn. Salesmen like this measure).
 *   ?   I don't trust results marked with '?'.  These were sent to me with
 *       either incomplete info, or with times that just don't make sense.
 *	 ?? means I think the performance is too poor, ?! means too good.
 *       If anybody can confirm these figures, please respond.
 *
 *  ABBREVIATIONS
 *	CCC	Concurrent Computer Corp. (was Perkin-Elmer)
 *	MC	Masscomp
 *
 *--------------------------------RESULTS END----------------------------------
 *
 *	The following program contains statements of a high-level programming
 *	language (C) in a distribution considered representative:
 *
 *	assignments			53%
 *	control statements		32%
 *	procedure, function calls	15%
 *
 *	100 statements are dynamically executed.  The program is balanced with
 *	respect to the three aspects:
 *		- statement type
 *		- operand type (for simple data types)
 *		- operand access
 *			operand global, local, parameter, or constant.
 *
 *	The combination of these three aspects is balanced only approximately.
 *
 *	The program does not compute anything meaningfull, but it is
 *	syntactically and semantically correct.
 *
 */


#include <stdio.h>
#include <string.h>

#define CPU8051 


#ifdef CPU8051 
extern initserial (); 
#define HZ  125L   /* 125 Interrupt per Second for time function */

#define LOOPS	200L	

#endif 
 
/* Accuracy of timings and human fatigue controlled by next two lines */
#ifndef LOOPS 
#define LOOPS   50000	/* Use this for slow or 16 bit machines */
/* #define LOOPS	500000	*/	/* Use this for faster machines */
#endif

/* Compiler dependent options */
#define	NOENUM			/* Define if compiler has no enum's */
#undef	NOSTRUCTASSIGN		/* Define if compiler can't assign structures */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -