📄 a_fefifo_ctc.tdf
字号:
--a_fefifo LPM_NUMWORDS=512 lpm_widthad=9 OVERFLOW_CHECKING="ON" UNDERFLOW_CHECKING="ON" USEDW_IN_DELAY=1 aclr clock empty full rreq usedw_in
--VERSION_BEGIN 8.1 cbx_cycloneii 2008:05:19:10:57:37:SJ cbx_fifo_common 2008:05:19:10:54:06:SJ cbx_lpm_add_sub 2008:05:19:10:49:01:SJ cbx_lpm_compare 2008:09:01:07:44:05:SJ cbx_lpm_counter 2008:05:19:10:42:20:SJ cbx_lpm_decode 2008:05:19:10:39:27:SJ cbx_mgl 2008:08:08:15:16:18:SJ cbx_stratix 2008:08:05:17:10:23:SJ cbx_stratixii 2008:08:07:13:54:47:SJ VERSION_END
-- Copyright (C) 1991-2008 Altera Corporation
-- Your use of Altera Corporation's design tools, logic functions
-- and other software and tools, and its AMPP partner logic
-- functions, and any output files from any of the foregoing
-- (including device programming or simulation files), and any
-- associated documentation or information are expressly subject
-- to the terms and conditions of the Altera Program License
-- Subscription Agreement, Altera MegaCore Function License
-- Agreement, or other applicable license agreement, including,
-- without limitation, that your use is for the sole purpose of
-- programming logic devices manufactured by Altera and sold by
-- Altera or its authorized distributors. Please refer to the
-- applicable agreement for further details.
--synthesis_resources = lut 19
SUBDESIGN a_fefifo_ctc
(
aclr : input;
clock : input;
empty : output;
full : output;
rreq : input;
usedw_in[8..0] : input;
)
VARIABLE
b_full : dffe;
b_non_empty : dffe;
b_one : dffe;
llreq : dffe;
cmp_full_aeb_int : WIRE;
cmp_full_agb_int : WIRE;
cmp_full_ageb : WIRE;
cmp_full_dataa[8..0] : WIRE;
cmp_full_datab[8..0] : WIRE;
equal_one[8..0] : WIRE;
equal_two[8..0] : WIRE;
equal_zero[8..0] : WIRE;
is_one0 : WIRE;
is_one1 : WIRE;
is_one2 : WIRE;
is_one3 : WIRE;
is_one4 : WIRE;
is_one5 : WIRE;
is_one6 : WIRE;
is_one7 : WIRE;
is_one8 : WIRE;
is_two0 : WIRE;
is_two1 : WIRE;
is_two2 : WIRE;
is_two3 : WIRE;
is_two4 : WIRE;
is_two5 : WIRE;
is_two6 : WIRE;
is_two7 : WIRE;
is_two8 : WIRE;
is_zero0 : WIRE;
is_zero1 : WIRE;
is_zero2 : WIRE;
is_zero3 : WIRE;
is_zero4 : WIRE;
is_zero5 : WIRE;
is_zero6 : WIRE;
is_zero7 : WIRE;
is_zero8 : WIRE;
usedw[8..0] : WIRE;
BEGIN
b_full.clk = clock;
b_full.clrn = (! aclr);
b_full.d = cmp_full_ageb;
b_non_empty.clk = clock;
b_non_empty.clrn = (! aclr);
b_non_empty.d = (((b_non_empty.q & (b_non_empty.q $ (((is_one8 & (! llreq.q)) # (is_two8 & llreq.q)) & rreq))) # ((b_one.q & (! is_zero8)) & (! is_one8))) # (((! b_one.q) & (! b_non_empty.q)) & (! is_zero8)));
b_one.clk = clock;
b_one.clrn = (! aclr);
b_one.d = ((! b_one.q) & (b_non_empty.q & (((is_one8 & (! llreq.q)) # (is_two8 & llreq.q)) & rreq)));
llreq.clk = clock;
llreq.clrn = (! aclr);
llreq.d = (rreq & b_non_empty.q);
IF (cmp_full_dataa[] == cmp_full_datab[]) THEN
cmp_full_aeb_int = VCC;
ELSE
cmp_full_aeb_int = GND;
END IF;
IF (cmp_full_dataa[] > cmp_full_datab[]) THEN
cmp_full_agb_int = VCC;
ELSE
cmp_full_agb_int = GND;
END IF;
cmp_full_ageb = cmp_full_agb_int # cmp_full_aeb_int;
cmp_full_dataa[] = usedw[];
cmp_full_datab[] = B"111111101";
empty = (! b_non_empty.q);
equal_one[] = ( B"1", B"1", B"1", B"1", B"1", B"1", B"1", B"1", B"0");
equal_two[] = ( B"1", B"1", B"1", B"1", B"1", B"1", B"1", B"0", B"1");
equal_zero[] = ( B"1", B"1", B"1", B"1", B"1", B"1", B"1", B"1", B"1");
full = b_full.q;
is_one0 = (usedw[0..0] $ equal_one[0..0]);
is_one1 = ((usedw[1..1] $ equal_one[1..1]) & is_one0);
is_one2 = ((usedw[2..2] $ equal_one[2..2]) & is_one1);
is_one3 = ((usedw[3..3] $ equal_one[3..3]) & is_one2);
is_one4 = ((usedw[4..4] $ equal_one[4..4]) & is_one3);
is_one5 = ((usedw[5..5] $ equal_one[5..5]) & is_one4);
is_one6 = ((usedw[6..6] $ equal_one[6..6]) & is_one5);
is_one7 = ((usedw[7..7] $ equal_one[7..7]) & is_one6);
is_one8 = ((usedw[8..8] $ equal_one[8..8]) & is_one7);
is_two0 = (usedw[0..0] $ equal_two[0..0]);
is_two1 = ((usedw[1..1] $ equal_two[1..1]) & is_two0);
is_two2 = ((usedw[2..2] $ equal_two[2..2]) & is_two1);
is_two3 = ((usedw[3..3] $ equal_two[3..3]) & is_two2);
is_two4 = ((usedw[4..4] $ equal_two[4..4]) & is_two3);
is_two5 = ((usedw[5..5] $ equal_two[5..5]) & is_two4);
is_two6 = ((usedw[6..6] $ equal_two[6..6]) & is_two5);
is_two7 = ((usedw[7..7] $ equal_two[7..7]) & is_two6);
is_two8 = ((usedw[8..8] $ equal_two[8..8]) & is_two7);
is_zero0 = (usedw[0..0] $ equal_zero[0..0]);
is_zero1 = ((usedw[1..1] $ equal_zero[1..1]) & is_zero0);
is_zero2 = ((usedw[2..2] $ equal_zero[2..2]) & is_zero1);
is_zero3 = ((usedw[3..3] $ equal_zero[3..3]) & is_zero2);
is_zero4 = ((usedw[4..4] $ equal_zero[4..4]) & is_zero3);
is_zero5 = ((usedw[5..5] $ equal_zero[5..5]) & is_zero4);
is_zero6 = ((usedw[6..6] $ equal_zero[6..6]) & is_zero5);
is_zero7 = ((usedw[7..7] $ equal_zero[7..7]) & is_zero6);
is_zero8 = ((usedw[8..8] $ equal_zero[8..8]) & is_zero7);
usedw[] = usedw_in[];
END;
--VALID FILE
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -