rfc2108.txt

来自「RFC 的详细文档！」· 文本 代码 · 共 1,751 行 · 第 1/5 页

               Setting this object to noSelfTest(1) has no
               effect.  The agent will always return the value
               noSelfTest(1) when this object is read."
       REFERENCE
               "[IEEE 802.3 Mgt], 30.4.1.2.2,
               acExecuteNonDisruptiveSelfTest."
       ::= { rptrRptrInfo 5 }

   rptrTotalPartitionedPorts OBJECT-TYPE
       SYNTAX      Gauge32
       MAX-ACCESS  read-only
       STATUS      deprecated
       DESCRIPTION
               "********* THIS OBJECT IS DEPRECATED **********

               This object returns the total number of ports in
               the repeater whose current state meets all three
               of the following criteria:  rptrPortOperStatus
               does not have the value notPresent(3),
               rptrPortAdminStatus is enabled(1), and
               rptrPortAutoPartitionState is autoPartitioned(2)."
       ::= { rptrRptrInfo 6 }




de Graaf, et. al.           Standards Track                    [Page 13]

RFC 2108             802.3 Repeater MIB using SMIv2        February 1997


   -- Basic information at the group level.
   --
   -- Configuration and status objects for each
   -- managed group in the system, independent
   -- of whether there is one or more managed
   -- repeater-units in the system.

   rptrGroupTable OBJECT-TYPE
       SYNTAX      SEQUENCE OF RptrGroupEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               "Table of descriptive and status information about
               the groups of ports."
       ::= { rptrGroupInfo 1 }

   rptrGroupEntry OBJECT-TYPE
       SYNTAX      RptrGroupEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               "An entry in the table, containing information
               about a single group of ports."
       INDEX    { rptrGroupIndex }
       ::= { rptrGroupTable 1 }

   RptrGroupEntry ::=
       SEQUENCE {
           rptrGroupIndex
               Integer32,
           rptrGroupDescr
               DisplayString,
           rptrGroupObjectID
               OBJECT IDENTIFIER,
           rptrGroupOperStatus
               INTEGER,
           rptrGroupLastOperStatusChange
               TimeTicks,
           rptrGroupPortCapacity
               Integer32
       }

   rptrGroupIndex OBJECT-TYPE
       SYNTAX      Integer32 (1..2147483647)
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "This object identifies the group within the



de Graaf, et. al.           Standards Track                    [Page 14]

RFC 2108             802.3 Repeater MIB using SMIv2        February 1997


               system for which this entry contains
               information."
       REFERENCE
               "[IEEE 802.3 Mgt], 30.4.2.1.1, aGroupID."
       ::= { rptrGroupEntry 1 }

   rptrGroupDescr OBJECT-TYPE
       SYNTAX      DisplayString (SIZE (0..255))
       MAX-ACCESS  read-only
       STATUS      deprecated
       DESCRIPTION
               "********* THIS OBJECT IS DEPRECATED **********

               A textual description of the group.  This value
               should include the full name and version
               identification of the group's hardware type and
               indicate how the group is differentiated from
               other types of groups in the repeater.  Plug-in
               Module, Rev A' or 'Barney Rubble 10BASE-T 4-port
               SIMM socket Version 2.1' are examples of valid
               group descriptions.

               It is mandatory that this only contain printable
               ASCII characters."
       ::= { rptrGroupEntry 2 }

   rptrGroupObjectID OBJECT-TYPE
       SYNTAX      OBJECT IDENTIFIER
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "The vendor's authoritative identification of the
               group.  This value may be allocated within the SMI
               enterprises subtree (1.3.6.1.4.1) and provides a
               straight-forward and unambiguous means for
               determining what kind of group is being managed.

               For example, this object could take the value
               1.3.6.1.4.1.4242.1.2.14 if vendor 'Flintstones,
               Inc.' was assigned the subtree 1.3.6.1.4.1.4242,
               and had assigned the identifier
               1.3.6.1.4.1.4242.1.2.14 to its 'Wilma Flintstone
               6-Port FOIRL Plug-in Module.'"
       ::= { rptrGroupEntry 3 }

   rptrGroupOperStatus OBJECT-TYPE
       SYNTAX      INTEGER {
                     other(1),



de Graaf, et. al.           Standards Track                    [Page 15]

RFC 2108             802.3 Repeater MIB using SMIv2        February 1997


                     operational(2),
                     malfunctioning(3),
                     notPresent(4),
                     underTest(5),
                     resetInProgress(6)
                   }
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "An object that indicates the operational status
               of the group.

               A status of notPresent(4) indicates that the group
               is temporarily or permanently physically and/or
               logically not a part of the repeater.  It is an
               implementation-specific matter as to whether the
               agent effectively removes notPresent entries from
               the table.

               A status of operational(2) indicates that the
               group is functioning, and a status of
               malfunctioning(3) indicates that the group is
               malfunctioning in some way."
       ::= { rptrGroupEntry 4 }

   rptrGroupLastOperStatusChange OBJECT-TYPE
       SYNTAX      TimeTicks
       MAX-ACCESS  read-only
       STATUS      deprecated
       DESCRIPTION
               "********* THIS OBJECT IS DEPRECATED **********

               An object that contains the value of sysUpTime at
               the time when the last of the following occurred:
                 1) the agent cold- or warm-started;
                 2) the row for the group was created (such
                    as when the group was added to the system); or
                 3) the value of rptrGroupOperStatus for the
                    group changed.

               A value of zero indicates that the group's
               operational status has not changed since the agent
               last restarted."
       ::= { rptrGroupEntry 5 }

   rptrGroupPortCapacity OBJECT-TYPE
       SYNTAX      Integer32 (1..2147483647)
       MAX-ACCESS  read-only



de Graaf, et. al.           Standards Track                    [Page 16]

RFC 2108             802.3 Repeater MIB using SMIv2        February 1997


       STATUS      current
       DESCRIPTION
               "The rptrGroupPortCapacity is the number of ports
               that can be contained within the group.  Valid
               range is 1-2147483647.  Within each group, the
               ports are uniquely numbered in the range from 1 to
               rptrGroupPortCapacity.

               Some ports may not be present in the system, in
               which case the actual number of ports present
               will be less than the value of rptrGroupPortCapacity.
               The number of ports present in the group will never
               be greater than the value of rptrGroupPortCapacity.

               Note:  In practice, this will generally be the
               number of ports on a module, card, or board, and
               the port numbers will correspond to numbers marked
               on the physical embodiment."
       REFERENCE
               "IEEE 802.3 Mgt, 30.4.2.1.2, aGroupPortCapacity."
       ::= { rptrGroupEntry 6 }


   -- Basic information at the port level.
   --
   -- Configuration and status objects for
   -- each managed repeater port in the system,
   -- independent of whether there is one or more
   -- managed repeater-units in the system.

   rptrPortTable OBJECT-TYPE
       SYNTAX      SEQUENCE OF RptrPortEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               "Table of descriptive and status information about
               the repeater ports in the system.  The number of
               entries is independent of the number of repeaters
               in the managed system."
       ::= { rptrPortInfo 1 }

   rptrPortEntry OBJECT-TYPE
       SYNTAX      RptrPortEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               "An entry in the table, containing information
               about a single port."



de Graaf, et. al.           Standards Track                    [Page 17]

RFC 2108             802.3 Repeater MIB using SMIv2        February 1997


       INDEX    { rptrPortGroupIndex, rptrPortIndex }
       ::= { rptrPortTable 1 }

   RptrPortEntry ::=
       SEQUENCE {
           rptrPortGroupIndex
               Integer32,
           rptrPortIndex
               Integer32,
           rptrPortAdminStatus
               INTEGER,
           rptrPortAutoPartitionState
               INTEGER,
           rptrPortOperStatus
               INTEGER,
           rptrPortRptrId
               Integer32
       }

   rptrPortGroupIndex OBJECT-TYPE
       SYNTAX      Integer32 (1..2147483647)
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "This object identifies the group containing the
               port for which this entry contains information."
       ::= { rptrPortEntry 1 }

   rptrPortIndex OBJECT-TYPE
       SYNTAX      Integer32 (1..2147483647)
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "This object identifies the port within the group
               for which this entry contains information.  This
               identifies the port independently from the repeater
               it may be attached to.  The numbering scheme for
               ports is implementation specific; however, this
               value can never be greater than
               rptrGroupPortCapacity for the associated group."
       REFERENCE
               "[IEEE 802.3 Mgt], 30.4.3.1.1, aPortID."
       ::= { rptrPortEntry 2 }

   rptrPortAdminStatus OBJECT-TYPE
       SYNTAX      INTEGER {
                     enabled(1),
                     disabled(2)



de Graaf, et. al.           Standards Track                    [Page 18]

RFC 2108             802.3 Repeater MIB using SMIv2        February 1997


                   }
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "Setting this object to disabled(2) disables the
               port.  A disabled port neither transmits nor
               receives.  Once disabled, a port must be
               explicitly enabled to restore operation.  A port
               which is disabled when power is lost or when a
               reset is exerted shall remain disabled when normal
               operation resumes.

               The admin status takes precedence over auto-
               partition and functionally operates between the
               auto-partition mechanism and the AUI/PMA.

               Setting this object to enabled(1) enables the port
               and exerts a BEGIN on the port's auto-partition
               state machine.

               (In effect, when a port is disabled, the value of
               rptrPortAutoPartitionState for that port is frozen
               until the port is next enabled.  When the port
               becomes enabled, the rptrPortAutoPartitionState
               becomes notAutoPartitioned(1), regardless of its
               pre-disabling state.)"
       REFERENCE
               "[IEEE 802.3 Mgt], 30.4.3.1.2, aPortAdminState
               and 30.4.3.2.1, acPortAdminControl."
       ::= { rptrPortEntry 3 }

   rptrPortAutoPartitionState OBJECT-TYPE
       SYNTAX      INTEGER {
                     notAutoPartitioned(1),
                     autoPartitioned(2)
                   }
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION