sspostinstall.sh

firebird源代码

#! /bin/sh


#------------------------------------------------------------------------
# Prompt for response, store result in Answer

Answer=""

AskQuestion() {
    Test=$1
    DefaultAns=$2
    echo -n "${1}"
    Answer="$DefaultAns"
    read Answer
}

#------------------------------------------------------------------------
# add a service line in the (usually) /etc/services or /etc/inetd.conf file
# Here there are three cases, not found         => add service line,
#                             found & different => ask user to check
#                             found & same      => do nothing
#                             

replaceLineInFile() {
    FileName=$1
    newLine=$2
    oldLine=$3

    if [ -z "$oldLine" ] 
      then
        echo "$newLine" >> $FileName

    elif [ "$oldLine" != "$newLine"  ]
      then
        echo ""
        echo "--- Warning ----------------------------------------------"
        echo ""
        echo "    In file $FileName found line: "
        echo "    $oldLine"
        echo "    Which differs from the expected line:"
        echo "    $newLine"
        echo ""

#        AskQuestion "Press return to update file or ^C to abort install"

        cat $FileName | grep -v "$oldLine" > ${FileName}.tmp
        mv ${FileName}.tmp $FileName
        echo "$newLine" >> $FileName
        echo "Updated."

    fi
}

#------------------------------------------------------------------------
# remove line from config file if it exists in it.

removeLineFromFile() {
    FileName=$1
    oldLine=$2

    if [ ! -z "$oldLine" ] 
      then
        cat $FileName | grep -v "$oldLine" > ${FileName}.tmp
        mv ${FileName}.tmp $FileName
        echo "Updated."

    fi
}


#------------------------------------------------------------------------
#  install correct /etc/init.d startup script
#  Basically mandrake and redhat have these special functions to display
#  pretty widgets.  Otherwise we install the default one.

installInitdFile() {

    if [ -e /etc/rc.d/init.d/functions ]
      then
        cp $IBRootDir/misc/firebird.init.d.mandrake /etc/rc.d/init.d/firebird
      else
        cp $IBRootDir/misc/firebird.init.d.generic /etc/rc.d/init.d/firebird

    fi

}



#------------------------------------------------------------------------
#  changeInitPassword


changeInitPassword() {

    NewPasswd=$1

    InitFile=/etc/rc.d/init.d/firebird
    if [ -f $InitFile ] 
      then
        ed $InitFile <<EOF
/ISC_PASSWORD/s/ISC_PASSWORD:=.*\}/ISC_PASSWORD:=$NewPasswd\}/g
w
q
EOF
    chmod u=rwx,g=rx,o= $InitFile

    fi
}

#------------------------------------------------------------------------
#  Unable to generate the password for the rpm, so put out a message
#  instead


keepOrigDBAPassword() {

    DBAPasswordFile=$IBRootDir/SYSDBA.password

    NewPasswd='masterkey'
    echo "Firebird initial install password " > $DBAPasswordFile
    echo "for user SYSDBA is : $NewPasswd" >> $DBAPasswordFile

    echo "for install on `hostname` at time `date`" >> $DBAPasswordFile
    echo "You should change this password at the earliest oportunity" >> $DBAPasswordFile
    echo ""

    echo "(For superserver you will also want to check the password in the" >> $DBAPasswordFile
    echo "daemon init routine in the file /etc/rc.d/init.d/firebird)" >> $DBAPasswordFile
    echo "" >> $DBAPasswordFile
    echo "Your should password can be changed to a more suitable one using the" >> $DBAPasswordFile
    echo "/opt/interbase/bin/gsec program as show below:" >> $DBAPasswordFile
    echo "" >> $DBAPasswordFile
    echo ">cd /opt/interbase" >> $DBAPasswordFile
    echo ">bin/gsec -user sysdba -password <password>" >> $DBAPasswordFile
    echo "GSEC>modify sysdba -pw <newpassword>" >> $DBAPasswordFile
    echo "GSEC>quit" >> $DBAPasswordFile

    chmod u=r,go= $DBAPasswordFile

}

#------------------------------------------------------------------------
#  Generate new sysdba password


generateNewDBAPassword() {


# Not all systems have mkpasswd, and there is also another mkpasswd which
# does different things.  So if not at this specific place leave as default


   
    DBAPasswordFile=$IBRootDir/SYSDBA.password
    NewPasswd=`/usr/bin/mkpasswd -l 8`
    if [ -z "$NewPasswd" ]
      then
        keepOrigDBAPassword
        return
    fi
    echo "Firebird generated password " > $DBAPasswordFile
    echo "for user SYSDBA is : $NewPasswd" >> $DBAPasswordFile
    echo "generated on `hostname` at time `date`" >> $DBAPasswordFile
    echo "" >> $DBAPasswordFile
    echo "(For superserver you will also want to check the password in the" >> $DBAPasswordFile
    echo "daemon init routine in the file /etc/rc.d/init.d/firebird)" >> $DBAPasswordFile
    echo "" >> $DBAPasswordFile
    echo "Your password can be changed to a more suitable one using the" >> $DBAPasswordFile
    echo "/opt/interbase/bin/gsec program as show below:" >> $DBAPasswordFile
    echo "" >> $DBAPasswordFile
    echo ">cd /opt/interbase" >> $DBAPasswordFile
    echo ">bin/gsec -user sysdba -password <password>" >> $DBAPasswordFile
    echo "GSEC>modify sysdba -pw <newpassword>" >> $DBAPasswordFile
    echo "GSEC>quit" >> $DBAPasswordFile

    chmod u=rw,go= $DBAPasswordFile

    $IBBin/gsec -user sysdba -password masterkey <<EOF
modify sysdba -pw $NewPasswd
EOF

    changeInitPassword "$NewPasswd"


}


#------------------------------------------------------------------------
#  Change sysdba password - this routine is interactive and is only 
#  used in the install shell script not the rpm one.


askUserForNewDBAPassword() {

    NewPasswd=""

    echo "" 
    while [ -z "$NewPasswd" ]
      do
          AskQuestion "Please enter new password for SYSDBA user: "
          NewPasswd=$Answer
          if [ ! -z "$NewPasswd" ]
            then
             $IBBin/gsec -user sysdba -password masterkey <<EOF
modify sysdba -pw $NewPasswd
EOF
              echo ""

              changeInitPassword "$NewPasswd"

          fi
          
      done
}


#------------------------------------------------------------------------
#  Change sysdba password - this routine is interactive and is only 
#  used in the install shell script not the rpm one.

#  On some systems the mkpasswd program doesn't appear and on others
#  there is another mkpasswd which does a different operation.  So if
#  the specific one isn't available then keep the original password.


changeDBAPassword() {

    if [ -z "$InteractiveInstall" ]
      then
        if [ -f /usr/bin/mkpasswd ]
            then
              generateNewDBAPassword
        else
              keepOrigDBAPassword
        fi
      else
        askUserForNewDBAPassword
    fi
}


#= Main Post ===============================================================

    # Make sure the links are in place 
    if [ ! -L /opt/interbase -a ! -d /opt/interbase ] 
      then 
    # Main link and... 
        ln -s $RPM_INSTALL_PREFIX/interbase /opt/interbase 
    fi 


    IBRootDir=/opt/interbase
    IBBin=$IBRootDir/bin
    RunUser=root


    # Update /etc/services


    FileName=/etc/services
    newLine="gds_db          3050/tcp  # InterBase Database Remote Protocol"
    oldLine=`grep "^gds_db" $FileName`

    replaceLineInFile "$FileName" "$newLine" "$oldLine"




    # remove any gds_db line in the /etc/inetd.conf


    FileName=/etc/inetd.conf
    oldLine=`grep "^gds_db" $FileName`

    removeLineFromFile "$FileName" "$oldLine"


    # Get inetd to reread new init files.

    if [ -f /var/run/inetd.pid ]
      then
        kill -HUP `cat /var/run/inetd.pid`
    fi


    # Install the correct /etc/init.d file
    installInitdFile


    # Update ownership of programs

    chown -R $RunUser.$RunUser $IBRootDir

    cd $IBBin


    # Create the ibmgr shell script.
    cat > ibmgr <<EOF
#!/bin/sh
INTERBASE=$IBRootDir
export INTERBASE
exec \$INTERBASE/bin/ibmgr.bin \$@
EOF

    chmod u=rwx,go=rx *

    # These two should only be executed by firebird user.
    chmod u=rwx,go= ibguard ibserver




    # Lock files

    cd $IBRootDir

    for i in isc_init1 isc_lock1 isc_event1 isc_guard1
      do
        FileName=$i.`hostname`
        touch $FileName
        chmod ug=rw,o= $FileName
      done

    touch interbase.log
    chmod u=rw,go= interbase.log

    # make examples writable by anyone              
    chmod uga+rw examples/*.gdb



    chmod ug+rx,o= /etc/rc.d/init.d/firebird

    # This will start it at runlevel defined within the firebird file itself.

    /sbin/chkconfig --add firebird


    # start the db server so we can change the password

    (cd /etc/rc.d/init.d; ./firebird start)

    # Change sysdba password

    changeDBAPassword